Article
  • Poly(1,2-propylene glycol adipate) as an Environmentally Friendly Plasticizer for Poly(vinyl chloride)
  • Zhao Y, Liang H, Wu D, Bian J, Hao Y, Zhang G, Liu S, Zhang H, Dong L
  • 폴리염화비닐의 친환경 가소제로서 Poly(1,2-propylene glycol adipate)
Abstract
Poly(1,2-propylene glycol adipate) (PPA) was used as an environmentally friendly plasticizer in flexible poly(vinyl chloride) (PVC). Thermal, mechanical, and rheological properties of the PVC/PPA blends were characterized by differential scanning calorimetry, dynamic mechanical analysis, tensile test, scanning electron microscopy and small amplitude oscillatory shear rheometry. The results showed that PPA lowered the glass transition temperature of PVC. The introduction of PPA could decrease tensile strength and Young's modulus of the PVC/PPA blends; however, elongationat-break was dramatically increased due to the plastic deformation. The plasticization effect of PPA was also manifested by the decrease of dynamic storage modulus and viscosity in the melt state of the blends. The results indicated that PPA had a good plasticizing effect on PVC.

Keywords: poly(vinyl chloride); poly(1,2-propylene glycol adipate); plasticizer; blends; mechanical properties.

References
  • 1. Rahman M, Brazel CS, Prog. Polym. Sci., 29, 1223 (2004)
  •  
  • 2. Soong SY, Cohen RE, Boyce MC, Polymer, 48(5), 1410 (2007)
  •  
  • 3. Lindstrom A, Hakkarainen M, J. Appl. Polym. Sci., 100(3), 2180 (2006)
  •  
  • 4. Latini G, Felice CD, Verrotti A, Reprod. Toxicol., 19, 27 (2004)
  •  
  • 5. Tickner JA, Schettler T, Guidotti T, McCally M, Rossi M, Am. J. Ind. Med., 39, 100 (2001)
  •  
  • 6. European Commission Health & Consumer protection directorate-general, Directorate C-Scientific Opinions, C2. Opinion on Medical Devices Containing DEHP plasticized PVC; Neonates and Other Groups Possibly at Risk from DEHP Toxicity (2002)
  •  
  • 7. Hill SS, Shaw BS, Wu AHB, Clin. Chim. Acta, 304, 1 (2001)
  •  
  • 8. Latini G, Felice CD, Presta G, Vecchio AD, Paris I, Ruggieri F, Mazzeo P, Environ. Health. Persp., 111, 1783 (2003)
  •  
  • 9. Kleinsasser NH, Harreus UA, Kastenbauer ER, Wallner BC, Sassen AW, Staudenmaier R, Rettenmeier AW, Toxicol. Lett., 148, 83 (2004)
  •  
  • 10. Krauskopf LG, J. Vinyl Add. Technol., 9, 159 (2003)
  •  
  • 11. Lindstrom A, Hakkarainen M, J. Appl. Polym. Sci., 100(3), 2180 (2006)
  •  
  • 12. Zhang HL, Fang JY, Ge HH, Han LJ, Wang XM, Hao YP, Han CY, Dong LS, Polym. Eng. Sci., 53(1), 112 (2013)
  •  
  • 13. Li XH, Xiao Y, Wang BA, Tang Y, Lu YQ, Wang CJ, J. Appl. Polym. Sci., 124(2), 1737 (2012)
  •  
  • 14. Loh XJ, Goh SH, Li J, Biomacromolecules, 8(2), 585 (2007)
  •  
  • 15. Yang BH, Bai YP, Cao YJ, J. Appl. Polym. Sci., 115(4), 2178 (2010)
  •  
  • 16. Marcilla A, Garcia S, J. Anal. Appl. Pyroly., 71, 458 (2004)
  •  
  • 17. Nijenhuis AJ, Colstee E, Grijpma DW, Pennings AJ, Polymer, 37(26), 5849 (1996)
  •  
  • 18. Agrawal A, Saran AD, Rath SS, Khanna A, Polymer, 45(25), 8603 (2004)
  •  
  • 19. Shah BL, Shertukde VV, J. Appl. Polym. Sci., 90(12), 3278 (2003)
  •  
  • 20. Kakuta N, J. Mater. Cycles Waste Manag., 11, 23 (2009)
  •  
  • 21. Liu YB, Liu WQ, Hou MH, Polym. Degrad. Stabil., 92, 1565 (2007)
  •  
  • 22. Khan M, Kanwal F, J. Chem. Soc. Pakistan., 19, 8 (1997)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2015; 39(2): 247-255

    Published online Mar 25, 2015

  • Received on Jun 12, 2014
  • Accepted on Aug 19, 2014