Article
  • Nylon 66 Viscosity Effect on Mechanical Properties of Nylon 66/Cloisite 93A Nanocomposite
  • Park SC, Kim HG, Min KE
  • Nylon 66/Cloisite 93A 나노복합체의 기계적 성질에 대한 Nylon 66 점도 효과
  • 박상철, 김호겸, 민경은
Abstract
It is found that the commercialization of nylon 66/Cloisite 93A nanocomposite by applying melt intercalation is possible in the composite production facilities of the pilot scale which has been generalized today. The strength and modulus under tensile and flexural stress have been improved with the introduction of Cloisite 93A in nylon 66. Furthermore, it is found through the analysis of morphologic and crystallization behavior that the elements such as content of Cloisite 93A, viscosity of nylon 66 and the crystallization behavior have significantly influences on the characteristics of nanocomposite.

현재 일반화되어 있는 pilot scale의 복합체 생산설비에서 용융 삽입법으로 nylon 66/Cloisite 93A 나노복합체의 상용화 가능성을 확인하였으며, nylon 66에 Cloisite 93A 도입으로 인장 및 굴곡응력에 대한 강도와 탄성률이 향상되었고, 형태학적 및 결정화 거동의 분석을 통해 Cloisite 93A 함량, nylon 66 점도 및 그에 따른 결정화 거동이 주요 영향요소임을 확인하였다.

Keywords: nylon 66; nanocomposite; viscosity; mechanical property; crystallization.

References
  • 1. Lin B, Thumen A, Heim HP, Scheel G, Sundararaj U, Polym. Eng. Sci., 49(4), 824 (2009)
  •  
  • 2. Ajayan PM, Schadler LS, Giannaris C, Rubio A, Adv. Mater., 12(10), 750 (2000)
  •  
  • 3. Benoit JM, Corraze B, Lefrant S, Blau WJ, Bernier P, Chauvet O, Synth. Met., 121, 1215 (2001)
  •  
  • 4. Lozano K, Barrera EV, J. Appl. Polym. Sci., 79(1), 125 (2001)
  •  
  • 5. Ray SS, Okamoto M, Prog. Polym. Sci., 28, 1539 (2003)
  •  
  • 6. Hussain F, Hojjati M, Okamoto M, Gorga RE, J. Comput.Mater., 40, 1511 (2006)
  •  
  • 7. Usuki A, Hasegawa N, Kato M, Adv. Polym. Sci., 179, 135 (2005)
  •  
  • 8. Powell CE, Beall GW, Curr. Opin. Solid State Mater. Sci., 10, 73 (2006)
  •  
  • 9. Yu ZZ, Yan C, Yang M, Mai YW, Polym. Int., 53, 1093 (2004)
  •  
  • 10. Lan T, Pinnavaia TJ, Chem. Mater., 6, 2216 (1994)
  •  
  • 11. Messersmith PB, Giannelis EP, Chem. Mater., 6, 1719 (1994)
  •  
  • 12. Kornmann X, Lindberg H, Berglund LA, Polymer, 42(10), 4493 (2001)
  •  
  • 13. Kawasumi M, Hasegawa N, Kato M, Usuki A, Okada A, Macromolecules, 30(20), 6333 (1997)
  •  
  • 14. Kato M, Usuki A, Okada A, J. Appl. Polym. Sci., 63, 1781 (1997)
  •  
  • 15. Maiti P, Nam PH, Okamoto M, Hasegawa N, Usuki A, Macromolecules, 35(6), 2042 (2002)
  •  
  • 16. Alexandre M, Dubois P, Sun T, Garces JM, Jerome R, Polymer, 43(8), 2123 (2002)
  •  
  • 17. Vaia RA, Giannelis EP, Macromolecules, 30(25), 8000 (1997)
  •  
  • 18. Vaia RA, Jandt KD, Kramer EJ, Giannelis EP, Macromolecules, 28(24), 8080 (1995)
  •  
  • 19. Weimer MW, Chen H, Giannelis EP, Sogah DY, J. Am. Chem. Soc., 121(7), 1615 (1999)
  •  
  • 20. Yano K, Usuki A, Okada A, Kurauchi T, Kamigaito O, J.Polym. Sci. Part A: Polym. Chem., 31, 2493 (1993)
  •  
  • 21. Yano K, Usuki A, Okada A, J. Polym. Sci. A: Polym. Chem., 35(11), 2289 (1997)
  •  
  • 22. Delozier DM, Orwoll RA, Cahoon JF, Johnston NJ, Smith JG, Connell JW, Polymer., 43, 813 (2001)
  •  
  • 23. Ke YC, Long CF, Qi ZN, J. Appl. Polym. Sci., 71(7), 1139 (1999)
  •  
  • 24. Wang Z, Pinnavaia TJ, Chem. Mater., 10, 3769 (1998)
  •  
  • 25. Huang XY, Lewis S, Brittain WJ, Vaia RA, Macromolecules, 33(6), 2000 (2000)
  •  
  • 26. Lee M, Ku J, Min BH, Kim JH, Appl. Chem. Eng., 22(5), 490 (2011)
  •  
  • 27. Fornes TD, Yoon PJ, Keskkula H, Paul DR, Polymer, 42(25), 9929 (2001)
  •  
  • 28. Gilman JW, Morgan AB, Harris RH, Manias E, Giannelis EP, Wuthenow MNew Advances in Flame Retardant Technology, CRC Press, Lancaster, Pennsylvania, 9 (1999)
  •  
  • 29. Monticelli O, Musina Z, Ghigliotti F, Russo S, Causin Ve-Polymers, No.124 (2007)
  •  
  • 30. Usuki A, Kojima Y, Kawasumi M, Okada A, Fukushima Y, Kurauchi T, Kamigaito O, J. Mater. Res., 8, 179 (1993)
  •  
  • 31. Wu SH, Wang FY, Ma CCM, Chang WC, Kuo CT, Kuan HC, Chen WJ, Mater. Lett., 49, 327 (2001)
  •  
  • 32. Uribe-Arocha P, Mehler C, Puskas JE, Altstadt V, Polymer, 44(8), 2441 (2003)
  •  
  • 33. Kashiwagi T, Harris RH, Zhang X, Briber RM, Cipriano BH, Raghavan SR, Awad WH, Shields JR, Polymer, 45(3), 881 (2004)
  •  
  • 34. Mu B, Wang QH, Wang TM, Wang HG, Jian LQ, Polym. Eng. Sci., 48(1), 203 (2008)
  •  
  • 35. Liu X, Wu Q, Macromol. Mater. Eng., 287, 180 (2002)
  •  
  • 36. Chavarria F, Paul DR, Polymer, 45(25), 8501 (2004)
  •  
  • 37. Liu XH, Wu QJ, Macromol. Mater. Eng., 287, 180 (2002)
  •  
  • 38. Mehrabzadeh M, Kamal MR, Polym. Eng. Sci., 44(6), 1152 (2004)
  •  
  • 39. Han B, Ji GD, Wu SS, Shen J, Eur. Polym. J., 39, 1641 (2003)
  •  
  • 40. Shen L, Phang IY, Chen L, Liu TX, Zeng KY, Polymer, 45(10), 3341 (2004)
  •  
  • 41. Vlasveld DPN, Vaidya SG, Bersee HEN, Picken SJ, Polymer, 46(10), 3452 (2005)
  •  
  • 42. Gyoo PM, Venkataramani S, Kim SC, J. Appl. Polym. Sci., 101(3), 1711 (2006)
  •  
  • 43. Lu YL, Zhang Y, Zhang GB, Yang MS, Yan SK, Shen DY, Polymer, 45(26), 8999 (2004)
  •  
  • 44. Yu ZZ, Yang MS, Zhang QX, Zhao CG, Mai YW, J. Polym. Sci. B: Polym. Phys., 41(11), 1234 (2003)
  •  
  • 45. Liu XH, Wu QJ, Berglund LA, Polymer, 43(18), 4967 (2002)
  •  
  • 46. Lu YL, Zhang GB, Feng M, Zhang Y, Yang MS, Shen DY, J. Polym. Sci. B: Polym. Phys., 41(19), 2313 (2003)
  •  
  • 47. Shen L, Phang IY, Chen L, Liu TX, Zeng KY, Polymer, 45(10), 3341 (2004)
  •  
  • 48. Noh WJ, Noh JG, Kim DS, Kim SH, KSAE., 10, 2639 (2010)
  •  
  • 49. Dasari A, Rohrmann J, Misra RDK, Mater. Sci. Eng., A354, 67 (2003)
  •  
  • 50. Lee SS, Park M, Lim S, Kim J, Hwang JT, Polym. Sci. Technol., 18(1), 8 (2007)
  •  
  • 51. Phang IY, Chen L, Tjiu WC, Pisharath S, Liu TX, Mater. Res. Innov., 8, 159 (2004)
  •  
  • 52. Dong Y, Bhattacharyya D, Composites : Part A., 39, 1177 (2008)
  •  
  • 53. Phang IY, Liu T, Mohamed A, Pramoda KP, Chen L, Shen L, Chow SY, He C, Lu X, Hu X, Polym. Int., 54, 456 (2005)
  •  
  • 54. Lee HB, Kim HG, Yoon KB, Lee DH, Min KE, Polym.(Korea), 32(1), 31 (2008)
  •  
  • 55. Wang H, Zeng CC, Elkovitch M, Lee LJ, Koelling KW, Polym. Eng. Sci., 41(11), 2036 (2001)
  •  
  • 56. Lu H, Xu X, Li X, Zhang Z, Bull. Mater. Sci., 29, 485 (2006)
  •  
  • 57. Zhang QX, Yu ZZ, Yang MS, Ma J, Mai YW, J. Polym. Sci. B: Polym. Phys., 41(22), 2861 (2003)
  •  
  • 58. Lu YL, Zhang GB, Feng M, Zhang Y, Yang MS, Shen DY, J. Polym. Sci. B: Polym. Phys., 41(19), 2313 (2003)
  •  
  • 59. Pavlidou S, Papaspyrides CD, Prog. Polym. Sci., 33, 1119 (2008)
  •  
  • 60. Choi YS, Chung IJ, Korean Chem. Eng. Res., 46(1), 23 (2008)
  •  
  • 61. Xu XM, Li BJ, Lu HM, Zhang ZJ, Wang HG, J. Appl. Polym. Sci., 107(3), 2007 (2008)
  •  
  • 62. Han B, Ji G, Wu S, Shen J, Eur. Polym. J., 39, 1641 (2003)
  •  
  • 63. Chen CH, Li HY, Chien CY, Yen FS, Chen HY, Lin JM, J. Appl. Polym. Sci., 112(2), 1063 (2009)
  •  
  • 64. Homminga DS, Goderis B, Mathot VBF, Groeninckx G, Polymer, 47(5), 1630 (2006)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2013; 37(1): 100-112

    Published online Jan 25, 2013

  • Received on Sep 12, 2012
  • Accepted on Nov 5, 2012