Article
  • Study on the Improvement of Physicochemical Properties of PEDOT-Metal Oxide Composite Thin Film by Vapor Phase Polymerization
  • Nam MR, Yim JH
  • 기상중합법으로 제조된 Poly(3,4-ethylenedioxythiophene)(PEDOT)-금속산화물 복합 박막의 물리화학적 물성 향상에 관한 연구
  • 남미래, 임진형
Abstract
The physicochemical properties such as surface hardness, solvent mechanical wear resistance, and resistance to scratch properties of poly(3,4-ethylenedioxythiophene) (PEDOT) thin film prepared by vapor phase polymerization (VPP) was effectively improved by post-treatment of various metal alkoxide sol solutions. Metal oxide layer derived from sol-gel process of metal alkoxide was generated on the PEDOT thin film layer by VPP, resulting in improving mechanical properties of the conductive thin films without any deterioration of their original surface resistance. Several kinds of silicone and titanium alkoxide derivatives with various functional groups were used as metal alkoxide sol sources. Among them, PEDOT-metal oxide composite thin film derived tetraethyl orthosilicate showed the best performance in the terms of surface resistance, transmittance, and various physicochemical properties. The effect of metal alkoxide content in washing solution, oxidant content and drying temperature have been investigated in order to optimize the various properties of PEDOT-metal oxide composite thin film.

기상중합으로 제조된 poly(3,4-ethylenedioxythiophene)(PEDOT) 박막을 다양한 금속 알콕사이드 졸 용액으로 후처리하여 내용제성, 내스크래치성, 연필경도와 같은 물리화학적 특성을 효과적으로 개선하였다. 기상중합으로 제조된 PEDOT 층위에 금속 알콕사이드의 졸-젤 공정으로부터 유도된 금속 산화막이 형성되어 전기적 특성의 큰 손실 없이 기계적 물성을 증대시킬 수 있었다. 금속 알콕사이드 졸은 다양한 기능기를 가지는 실리콘 및 티타늄계 알콕사이드 화합물을 사용하였다. 이 중에서 tetraethyl orthosilicate를 기반으로 한 금속 알콕사이드 졸을 사용한 경우의 PEDOT-금속산화물 복합 박막이 표면저항, 투과도 및 다양한 물리화학적 물성 관점에서 가장 우수하였다. PEDOT-금속산화물 복합 박막의 전기적, 광학적, 물리화학적 특성 관점에서의 최적화를 위하여 금속 알콕사이드 졸의 함량, 산화제 함량, 후처리 후의 건조온도에 따른 효과를 살펴보았다.

Keywords: PEDOT; vapor phase polymerization; sol-gel process; metal oxide; composite thin film.

References
  • 1. Ching CK, Fincher CR, Park YW, Heeger AJ, Shirakawa H, Louis EJ, Gau SC, MacDiarmid AG, Phys.Rev. Lett., 39, 1098 (1977)
  •  
  • 2. Patil AO, Heeger AJ, Wudl F, Chem. Rev., 88, 183 (1988)
  •  
  • 3. Jin JI, Polym.(Korea), 12(4), 301 (1988)
  •  
  • 4. Bantikassegn W, Inganas O, Thin Solid Films, 293(1-2), 138 (1997)
  •  
  • 5. Groenendaal BL, Jonas F, Freitag D, Pielartzik H, Reynolds JR, Adv. Mater., 12(7), 481 (2000)
  •  
  • 6. Vacca P, Petrosino M, Miscioscia R, Nenna G, Minarini C, Della Sala D, Rubino A, Thin Solid Films, 516(12), 4232 (2008)
  •  
  • 7. Kim YH, Sachse C, Machala ML, May C, Muller-Meskamp L, Leo K, Adv. Funct. Mater., 21(6), 1076 (2011)
  •  
  • 8. Groenendaal L, Zotti G, Jonas F, Syn. Met., 118, 105 (2001)
  •  
  • 9. Eftekhari A, Syn. Met., 125, 295 (2002)
  •  
  • 10. Han YH, Yim JH, Polym.(Korea), 34(5), 450 (2010)
  •  
  • 11. Lock JP, Im SG, Gleason KK, Macromolecules, 39(16), 5326 (2006)
  •  
  • 12. Jang J, Lim B, Angew. Chem., 115, 5758 (2003)
  •  
  • 13. Choi M, Lim B, Jang J, Macromol. Res., 16(3), 200 (2008)
  •  
  • 14. Im SG, Gleason KK, Macromolecules, 40(18), 6552 (2007)
  •  
  • 15. Winther-Jensen B, West K, Macromolecules, 37(12), 4538 (2004)
  •  
  • 16. Kim J, Kim E, Won Y, Lee H, Suh K, Syn. Met., 139, 485 (2003)
  •  
  • 17. Fabretto M, Zuber K, Hall C, Murphy P, Macromol. Rapid Commun., 29(16), 1403 (2008)
  •  
  • 18. Madla CM, Kariukia PN, Gendrona J, Piperb LFJ, WEJ, Syn. Met., 161, 1159 (2011)
  •  
  • 19. Le Truong T, Kim DO, Lee Y, Lee TW, Park JJ, Pu L, Nam JD, Thin Solid Films, 516(18), 6020 (2008)
  •  
  • 20. Truong TL, Luong ND, Nam JD, Lee Y, Choi HR, Koo JC, Nguyen HN, Macromol. Res., 15(5), 465 (2007)
  •  
  • 21. Jonas F, Morrison JT, Syn. Met., 85, 1397 (1997)
  •  
  • 22. Sotzing GA, Reddinger JL, Reynolds JR, Syn. Met., 84, 199 (1997)
  •  
  • 23. Tehrani P, Hennerdal LO, Dyer AL, Reynolds JR, Berggren M, J. Mater. Chem., 19, 1799 (2009)
  •  
  • 24. Kim YH, Sachse C, Machala ML, May C, Muller-Meskamp L, Leo K, Adv. Funct. Mater., 21(6), 1076 (2011)
  •  
  • 25. Nien PC, Wang JY, Chen PY, Chen LC, Ho KC, Bioresour. Technol., 101(14), 5480 (2010)
  •  
  • 26. Soares BG, Leyva ME, Macromol. Mater. Eng., 292, 354 (2007)
  •  
  • 27. Ruckenstein E, Sun Y, Syn. Met., 75, 79 (1995)
  •  
  • 28. Lee YT, Polym. Sci. & Tech., 4, 441 (1993)
  •  
  • 29. Park DG, Polym. Sci. Technol., 8(3), 248 (1997)
  •  
  • 30. Park JO, Polym. Sci. Technol., 8(3), 261 (1997)
  •  
  • 31. Choi JS, Jeon JK, Ko YS, Park YK, Kim SG, Yim JH, Thin Solid Films, 517(13), 3645 (2009)
  •  
  • 32. Han YH, Travas-Sejdic J, Wright B, Yim JH, Macromol.Chem. Phys., 212, 521 (2011)
  •  
  • 33. Aben GVA, Somers MJM, U.S. Patent 6,404,120 B1 (2002)
  •  
  • 34. ASTM D3363, 05 Standard Test Method for Film Hardness by Pencil Test, Book of standards, 6, 1
  •  
  • 35. Brunel D, Bellocq N, Sutra P, Cauvel A, Lasperas M, Moreau P, Renzo FD, Galarneau A, Fajula F, Coord. Chem.Rev., 178-180, 1085 (1998)
  •  
  • 36. Kim S, Pang I, Lee J, Macromol. Rapid Commun., 28(15), 1574 (2007)
  •  
  • 37. Van bommel MJ, Bernards TNM, J. Sol-Gel Sci. & Tech., 8, 459 (1997)
  •  
  • 38. Lee KH, Lee BH, Oh BK, Ahne KH, Kim JO, J.Korean Ceram. Soc., 27, 471 (1989)
  •  
  • 39. Garreau S, Louarn G, Buisson JP, Froyer G, Lefrant S, Macromolecules, 32(20), 6807 (1999)
  •  
  • 40. Lapkowski M, Pron A, Syn. Met., 110, 79 (2000)
  •  
  • 41. Tran-Van F, Garreau S, Louarn G, Froyer G, Chevrot C, J.Mater. Chem., 11, 1378 (2001)
  •  
  • 42. Chiu WW, Travas-Sejdic J, Cooney RP, Bowmaker GA, J. Raman Spectrosopy., 37, 1354 (2006)
  •  
  • 43. Choi JS, Cho KY, Yim JH, Eur. Polym. J., 46, 389 (2010)
  •  
  • 44. Kim DO, Lee PC, Kang SJ, Jang K, Lee JH, Cho MH, Nam JD, Thin Solid Films., 517, 4516 (2009)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2012; 36(5): 599-605

    Published online Sep 25, 2012

  • Received on Feb 15, 2012
  • Accepted on May 1, 2012