Article
  • Dynamics and Instability of a Polymeric Paint in Roll Coating Process for Automotive Pre-coating Application
  • Kim JH, Lee IJ, Noh SM, Kang CY, Nam JH, Jung HW, Park JM
  • 자동차 선도장을 위한 롤코팅 공정에서 고분자 도료의 동적 거동 및 불안정성
  • 김진호, 이인준, 노승만, 강충열, 남준현, 정현욱, 박종명
Abstract
3-Roll coating process as a key application technology for manufacturing automotive pre-painted metal-sheets has been studied. The 3-Roll coating system for this study consists of pick-up roll for picking up and distributing coating liquid from the reservoir, metering roll to properly meter coating liquid in metering gap regime, and applicator roll for directly transferring liquid into metal-sheet surface. Flow dynamics and operable coating windows of a polymeric paint (primer) with shear-thinning rheological property have been correlated with processing parameters such as speed ratio and metering gap between pick-up and metering rolls. In the uniform coating regime, dry coating thickness increased with increasing metering gap or decreasing speed ratio. Ribbing and cascade instabilities were observed in low speed and high speed ratio conditions, respectively. It is revealed that lower speed ratio makes severity and wavelength of the ribbing increase, aggravating flow instability in coating systems.

자동차 선도장 강판을 위한 핵심 응용기술로서 3-롤코팅 공정을 연구하였다. 본 연구를 위한 3-롤코팅은 저장조로부터 코팅액을 끌어 올리는 pick-up롤, 적절한 코팅 두께로 계량시키기 위한 계량롤, 강판에 직접 코팅시키기 위한 applicator 롤로 구성되어 있다. 전단담화의 유변물성을 갖는 고분자 도료의 코팅 유동 특성과 코팅 운전 영역을 pickup롤과 계량롤 사이의 속도비와 간격 등의 공정조건과의 상관관계를 통해 고찰하였다. 안정한 코팅 영역에서, 간격이 크거나 속도비가 작을수록 코팅 두께는 증가하였다. 또한, ribbing과 cascade라는 불안정성은 각각 속도비가 낮고 높을 때 관찰되었다. 특히, 속도비가 낮을때, ribbing의 파장과 심각도가 증가함을 확인하였다.

Keywords: roll coating; ribbing; cascade; polymeric primer; coating window.

References
  • 1. Poth U, Automotive Coatings Formulation, Vincentz, Hannover (2008)
  •  
  • 2. Matthews AE, Davies GM, Proc. IMechE Part B: J. Eng. Manufac., 211, 319 (1997)
  •  
  • 3. Weinstein SJ, Ruschak KJ, Annu. Rev. Fluid Mech., 36, 29 (2004)
  •  
  • 4. Hwang HD, Moon JI, Lee YJ, Kim HJ, Hyun JH, Noh SM, Kang CY, Lee JW, Nam JH, Park JM, J. Adhesion Interface., 10, 155 (2009)
  •  
  • 5. Streitberger HJ, Dossel KF, Editors, Automotive Paints and Coatings, 2nd Ed., Wiley-VCH, Weinheim (2008)
  •  
  • 6. Lopez FV, Rosen M, Latin Am. Appl. Res., 32, 247 (2002)
  •  
  • 7. Gutoff EB, Cohen ED, Modern Coating and Drying Technology, Wiley-VCH, New York (1992)
  •  
  • 8. Kistler SF, Schweizer PM, Liquid Film Coating, Chapman & Hall, New York (1997)
  •  
  • 9. Gutoff EB, Cohen ED, Coating and Drying Defects, Wiley-Interscience, New York (1995)
  •  
  • 10. Pearson JRA, J. Fluid Mech., 7, 481 (1960)
  •  
  • 11. Kistler SF, Scriven LE, Int. J. Numer. Meth. Fluids., 4, 207 (1984)
  •  
  • 12. Gaskell PH, Napur N, Savage MD, Phys. Fluids., 13, 1243 (2001)
  •  
  • 13. Benkreira H, Chem. Eng. Sci., 57(15), 3025 (2002)
  •  
  • 14. Zevallos GA, Carvalho MS, Pasquali M, J. Non-Newton. Fluid Mech., 130(2-3), 96 (2005)
  •  
  • 15. Coyle DJ, Chem. Eng. Sci., 43, 2673 (1988)
  •  
  • 16. Cohu O, Magnin A, Chem. Eng. Sci., 52(8), 1339 (1997)
  •  
  • 17. Carvalho MS, Scriven LE, J. Fluid Mech., 339, 143 (1997)
  •  
  • 18. Greener J, Sullivan T, Tuner B, Middleman S, Chem. Eng. Commun., 5, 73 (1980)
  •  
  • 19. Savage MD, AIChE J., 30, 999 (1984)
  •  
  • 20. Hasegawa T, Sorimachi K, AIChE J., 39, 935 (1993)
  •  
  • 21. Chong YH, Gaskell PH, Kapur N, Chem. Eng. Sci., 62(15), 4138 (2007)
  •  
  • 22. Lee JH, Han SK, Lee JS, Jung HW, Hyun JC, Korea-Aust. Rheol. J., 22(1), 75 (2010)
  •  
  • 23. Benkreira H, Edwards MF, Wilkinson WL, Chem. Eng. Sci., 36, 429 (1981)
  •  
  • 24. Coyle DJ, Macosko CW, Scriven LE, AIChE J., 36, 161 (1990)
  •  
  • 25. Hao Y, Haber S, Int. J. Numer. Meth. Fluids., 30, 635 (1999)
  •  
  • 26. Benkreira H, AIChE J., 48(2), 221 (2002)
  •  
  • 27. Kang CY, Lee JY, Noh SM, Nam JH, Park JM, Jung HW, Yu SS, J. Adhesion Interface., 12, 34 (2011)
  •  
  • 28. Han SK, Shin DM, Park HY, Jung HW, Hyun JC, Eur. Phys. J. Special Topics., 166, 107 (2009)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2011; 35(6): 574-579

    Published online Nov 25, 2011

  • Received on May 4, 2011
  • Accepted on Jul 12, 2011