Article
  • Preparation of Poly(vinyl acetate)/Silver Hollow Microspheres via Suspension Polymerization
  • Yeum JH
  • 현탁중합에 의한 폴리(비닐 아세테이트)/은 중공 미세입자의 제조
  • 염정현
Abstract
Effects of silver nanoparticles on the polymerization rate and morphology of poly(vinyl acetate) (PVAc)/silver microspheres prepared by suspension polymerization of VAc were investigated. Scanning electron microscopy, transmission electron microscopy, X-ray diffraction and atomic absorption spectrometry were used to characterize the morphology and properties of the PVAc/silver microspheres. Due to the change of hydrophilicity of silver nanoparticles, appearance of the microspheres having golf balllike convave surfaces was observed. Under controlled concentration of surfactant, PVAc/silver microspheres with various hollow structures were synthesized. In the case of silver nanoparticles modified by surfactant, the polymerization rate increased slightly. PVAc/silver microspheres with a conversion up to 80% were prepared via suspension polymerization.

현탁중합에 의한 폴리(비닐 아세테이트)((poly(vinyl acetate)(PVAc))/은 미세입자 제조시 사용된 은 나노입자가 중합속도 및 PVAc 미세입자의 형태에 미치는 영향을 고찰하였다. 주사전자현미경, 투과전자현미경, X선 회절, 원자흡수분광분석법을 이용하여 제조된 미세입자의 형태와 특성을 분석한 결과, 사용된 은 나노입자 표면의 친수성 정도와 계면활성제의 농도에 따라 미세입자의 표면이 골프공 표면처럼 오목해지거나 다양한 형태의 중공 구조를 가지는 PVAc/은 미세입자가 제조됨이 관찰되었다. 계면활성제로 개질된 은 나노입자를 이용하여 중합한 경우에 중합속도가 약간 증가하였으며, 80% 이상의 전환율을 가지는 PVAc/은 미세입자를 제조할 수 있었다.

Keywords: PVAc/silver microsphere; suspension polymerization; hollow structure.

References
  • 1. Tobita H, Polymer, 35(14), 3032 (1994)
  •  
  • 2. Gao BJ, Lu JH, Zhuang RB, Zhang GH, J. Appl. Polym. Sci., 114(6), 3487 (2009)
  •  
  • 3. Jung HM, Lee EM, Ji BC, Deng Y, Yun JD, Yeum JH, Colloid Polym. Sci., 285, 705 (2007)
  •  
  • 4. Hailstone RK, J. Phys. Chem., 99(13), 4414 (1995)
  •  
  • 5. Sun T, Seff K, Chem. Rev., 94(4), 857 (1994)
  •  
  • 6. Tada H, Teranishi K, Inubushi Y, Ito S, Langmuir, 16(7), 3304 (2000)
  •  
  • 7. Nickel U, Castell AZ, Poppl K, Schneider S, Langmuir, 16(23), 9087 (2000)
  •  
  • 8. Pal T, J. Chem. Educ., 71, 679 (1994)
  •  
  • 9. Iwata Y, Zeolite News Lett., 13, 8 (1996)
  •  
  • 10. Oya A, J. Antibac. Antifungal. Agents(Jpn)., 24, 429 (1996)
  •  
  • 11. Lim JS, Son EH, Hwang SJ, Kim SS, Polym.(Korea), 29(4), 350 (2005)
  •  
  • 12. Yang G, Chung DJ, Polym.(Korea), 27(5), 493 (2003)
  •  
  • 13. Dowding PJ, Vincent B, Colloids and Surfaces., 161, 259 (2000)
  •  
  • 14. Yeum JH, Qunhui S, Deng Y, Macromol. Mater.Eng., 290, 78 (2005)
  •  
  • 15. Yeum JH, Deng Y, Colloid Polym. Sci., 283, 1172 (2005)
  •  
  • 16. Yeum JH, Ghim HD, Deng Y, Fiber Polym., 6, 277 (2005)
  •  
  • 17. Lee EM, Lee HW, Park JH, Han YA, Ji BC, Oh W, Deng Y, Yeum JH, Colloid Polym. Sci., 286, 1379 (2008)
  •  
  • 18. Ji BC, Lee EM, Yeum JH, Polym.(Korea), 34(4), 341 (2010)
  •  
  • 19. Dahmen C, Sprafke AN, Dieker H, Wuttig M, von Plessen G, Appl. Phys. Lett., 88, 011923 (2006)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2011; 35(5): 390-394

    Published online Sep 25, 2011

  • Received on Jan 18, 2011
  • Accepted on May 11, 2011