Article
  • Effect of Modification of Silver Nanoparticles on the Preparation of Poly(methyl methacrylate)/Silver Microspheres via Suspension Polymerization
  • Ji BC, Lee EM, Yeum JH
  • 현탁중합에 의한 폴리(메틸 메타크릴레이트)/은 미세입자 제조에 은 나노입자의 개질이 미치는 영향
  • 지병철, 이은미, 염정현
Abstract
Effects of modification of silver nanoparticles on the polymerization rate and morphology of poly(methyl methacrylate)(PMMA)/silver microspheres prepared by suspension polymerization of MMA were investigated. The silver nanoparticles and their surface hydrophilicity played an important role in the polymerization rate and the morphology of poly(methyl methacrylate) (PMMA)/silver microspheres. The polymerization rate increased slightly with modified silver nanoparticles. PMMA/silver microspheres with conversion up to 85% were obtained in spite of the low polymerization temperature. Due to the change of hydrophilicity of silver nanoparticles, different appearances of the microspheres having golf ball-like convex surfaces or concave surfaces were observed. As the hydrophilicity of silver was decreased, stable nanocomposites were prepared.

현탁중합에 의한 폴리(메틸 메타크릴레이트)((poly(methyl methacrylate)(PMMA))/은 미세입자 제조시 사용된 은 나노입자가 중합속도 및 PMMA 미세입자의 형태에 미치는 영향을 고찰하였다. 은 나노입자의 친수성 정도는 중합속도 및 PMMA/은 미세입자의 형태에 큰 영향을 주었다. 개질된 은 나노입자를 이용하여 중합한 경우에 중합속도가 약간 증가하였다. 중합온도가 낮음에도 불구하고 85% 이상의 전환율을 가지는 PMMA/은 미세입자를 제조할 수 있었다. 사용된 은 나노입자 표면의 친수성 정도에 따라 중합 후 미세입자의 표면은 볼록한 모양과 오목한 모양의 입자가 제조되었다. 친수성 정도가 감소된 은 나노입자를 이용하여 현탁중합된 미세입자가 안정적인 나노복합체를 형성하였다.

Keywords: PMMA/silver microsphere; suspension polymerization; nanocomposites

References
  • 1. Coover HW, McIntyre Jr. JMin Encyclopedia of Polymer Science and Engineering, Mark HF, Bikales NM, Overberger CG, Menges G, Kroschwitz JI, Editors, John Wiley and Sons, New York, Vol 1, p 234 (1985)
  •  
  • 2. Nuyken O, Lettermann Gin Handbook of Polymer Synthesis, Kricheldorf HR, Editor, Marcel Dekker, New York, Part A, p 223 (1992)
  •  
  • 3. Kim KH, Jo WH, Jho JY, Lee MS, Lim GT, Fiber Polym., 4, 97 (2003)
  •  
  • 4. Cho HW, Lee SH, So JH, Jaung HY, Yoon KJ, Fiber Polym., 5, 239 (2004)
  •  
  • 5. Charnley J, J. Bone, J. Surg., 42B, 28 (1960)
  •  
  • 6. Luna-Xavier JL, Bourgeat-Lami E, Guyot A, Colloid Polym. Sci., 279, 947 (2001)
  •  
  • 7. Lee J, Sena M, Colloid Polym. Sci., 273, 76 (1995)
  •  
  • 8. Fleming MS, Mandal TK, Walt DR, Chem. Mater., 13, 2210 (2001)
  •  
  • 9. Tiarks F, Landfester K, Antonietti M, Langmuir, 17(19), 5775 (2001)
  •  
  • 10. Erdem B, Sudol ED, Dimonie VL, El-Aasser MS, J. Polym. Sci. A: Polym. Chem., 38(24), 4419 (2000)
  •  
  • 11. Carotenuto G, Her YS, Matijevic E, Ind. Eng. Chem. Res., 35(9), 2929 (1996)
  •  
  • 12. Lira-Cantu M, Gomez-Romero P, Chem. Mater., 10, 698 (1998)
  •  
  • 13. Wang Y, Herron N, Chem. Phys. Lett., 200, 71 (1992)
  •  
  • 14. Hailstone RK, J. Phys. Chem., 99(13), 4414 (1995)
  •  
  • 15. Sun T, Seff K, Chem. Rev., 94(4), 857 (1994)
  •  
  • 16. Tada H, Teranishi K, Inubushi Y, Ito S, Langmuir, 16(7), 3304 (2000)
  •  
  • 17. Nickel U, Castell AZ, Poppl K, Schneider S, Langmuir, 16(23), 9087 (2000)
  •  
  • 18. Pal T, J. Chem. Educ., 71, 679 (1994)
  •  
  • 19. Iwata Y, Zeolite News Lett., 13, 8 (1996)
  •  
  • 20. Oya A, J. Antibac. Antifungal. Agents (Jpn), 24, 429 (1996)
  •  
  • 21. Lim JS, Son EH, Hwang SJ, Kim SS, Polym.(Korea), 29(4), 350 (2005)
  •  
  • 22. Yang G, Chung DJ, Polym.(Korea), 27(5), 493 (2003)
  •  
  • 23. Dowding PJ, Vincent B, Colloids Surf., 161, 259 (2000)
  •  
  • 24. Yeum JH, Qunhui S, Deng Y, Macromol. Mater. Eng., 290, 78 (2005)
  •  
  • 25. Yeum JH, Deng Y, Colloid Polym. Sci., 283, 1172 (2005)
  •  
  • 26. Yeum JH, Ghim HD, Deng Y, Fiber Polym., 6, 277 (2005)
  •  
  • 27. Vermeulen T, Williams GM, Langlois GE, Chem. Eng. Prog., 51, 85 (1955)
  •  
  • 28. Dahmen C, Sprafke AN, Dieker H, Wuttig M, von Plessen G, Appl. Phys. Lett., 88, 011923 (2006)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2010; 34(4): 341-345

    Published online Jul 25, 2010

  • Received on Feb 2, 2010
  • Accepted on Mar 8, 2010