Article
  • Characterization of Lactide/Hyaluronic Acid Polymer Cross-Linked by 1,3-Butadiene Diepoxide
  • Han GS, Bae JE, Kim IS, Cheong SI
  • 1,3-Butadiene Diepoxide에 의해 가교된 락타이드/히아루론산 고분자의 특성
  • 한광선, 배정은, 김인섭, 정성일
Abstract
The hyaluronic acid (HA) polymers cross-linked with lactide (LA) using the crosslinking agent, 1,3-butadiene diepoxide (BD), were prepared in order to develop a biomedical material for tissue engineering. The degree of lactide and BD reaction of the crosslinked polymer was determined by the analysis of nuclear magnetic resonance spectroscopy. Both degree of reaction and swelling ratio increased with BD concentration or LA/HA mole ratio. Tensile modulus decreased with increasing BD concentration or decreasing LA/HA mole ratio. Degradation was shown to be progressed at two different stages and became slow with increasing BD concentration. It was shown that the first stage degradation was mainly due to the decomposition of ester linkage in the crosslinked structure. The cell growth inhibition increased with BD concentration. Although cytotoxicity was slightly observed in the high BD concentration, the value was very low (below 6%) enough not to affect the cell growth.

조직공학용 생체재료로 사용하고자 가교제 1,3-butadiene diepoxide(BD)를 사용하여 락타이드(LA)와 가교시킨 히아루론산(HA) 고분자를 제조하였다. 가교된 고분자의 락타이드 및 BD 반응도는 핵자기 공명 분광법으로 결정하였다. 반응도와 팽윤도는 LA/HA 몰비 혹은 가교제 농도를 증가시킴에 따라 증가하였다. 탄성률은 가교제 농도가 증가하거나 HA/LA 몰비가 감소함에 따라 감소하였다. 생분해는 2단계로 진행되었으며 BD 농도가 증가할수록 서서히 진행되었다. 첫 단계 분해는 주로 가교구조에 존재하는 에스테르기의 분해에 기인한 것으로 나타났다. 세포 성장 저해는 BD 농도가 증가함에 따라 증가하였다. 세포 독성은 BD 농도가 클 경우 약간 나타났으나 그 값은 6% 미만으로 세포 성장에 큰 문제는 없는 것으로 나타났다.

Keywords: biodegradable polymer; hyaluronic acid; lactide; 1,3-butadiene diepoxide; cytotoxicity

References
  • 1. Park YD, Tirelli N, Hubbell JA, Biomaterials, 24, 893 (2003)
  •  
  • 2. Prestwitch GD, Marecak DM, Marecek JF, J. Control. Release, 53, 93 (1998)
  •  
  • 3. Luo Y, Kirker KR, Prestwich GD, J. Control. Release, 69, 169 (2000)
  •  
  • 4. Park SN, Lee HJ, Lee KH, Suh H, Biomaterials, 22, 1205 (2002)
  •  
  • 5. Park SN, Lee HJ, Lee KH, Suh H, Biomaterials, 24, 1631 (2003)
  •  
  • 6. Nam HS, Kim JH, An JH, Chung DJ, Polym.(Korea), 25(4), 476 (2001)
  •  
  • 7. Hunt JA, Joshi HN, Stella VJ, Topp EM, J. Control. Release, 12, 159 (1990)
  •  
  • 8. Benedetti L, Cortivo R, Berti T, Berti A, Pea F, Marzzo M, Moras M, Abatangel G, Biomaterials, 14, 1154 (1993)
  •  
  • 9. Aigner J, Tegeler J, Hutzler P, Campoccia D, Pavesio A, Hammer C, Kastenbauer E, Naurnann A, J. Biomed. Mater. Res., 42, 172 (1998)
  •  
  • 10. Chen GP, Ito Y, Imanishi Y, Magnani A, Lamponi S, Barbucci R, Bioconjugate Chem., 8, 730 (1997)
  •  
  • 11. Lee JS, Choo DJ, Kim SH, Kim YH, Polym.(Korea), 22(6), 880 (1998)
  •  
  • 12. Grandfils C, Flandroy P, Jerome R, J. Control. Release, 38, 109 (1996)
  •  
  • 13. Fukuzaki H, Yoshida M, Asano M, Kumakura M, Eur. Polym. J., 25, 1019 (1989)
  •  
  • 14. Li S, Tenon M, Garreau H, Braud C, Vert M, Polym. Degrad. Stabil., 67, 85 (2000)
  •  
  • 15. Kwon JY, Cheong SI, Polym.(Korea), 29(5), 445 (2005)
  •  
  • 16. Kwon JY, Cheong SI, Membrane J.(Korea), 15, 8 (2005)
  •  
  • 17. Kwon JY, Cheong SI, Polym.(Korea), 29(6), 599 (2005)
  •  
  • 18. Kim MS, Kwon JY, Cheong SI, Membrane J.(Korea), 15, 281 (2005)
  •  
  • 19. Kim WJ, Kwon JY, Cheong SI, Kim IS, Korean J. Biotechnol. Bioeng., 21, 255 (2006)
  •  
  • 20. Sakurai K, Ueno Y, Okuyama TU.S. Patent 4,716,224 (1987)
  •  
  • 21. Malson T, Ahrgren LG, Belder ANU.S. Patent 4,772,419 (1988)
  •  
  • 22. Yang JD, Tsai SW, Chen JH, Chen CL, Hsieh YLU.S. Patent 6,852,255 (2002)
  •  
  • 23. Laurent TC, Hellsing K, Gelotte B, Acta Chem. Scand., 18, 274 (1964)
  •  
  • 24. Ronnebeger B, Kao WJ, Anderson JM, Kissel T, J. Biomed. Mater. Res., 30, 31 (1996)
  •  
  • 25. Allcock HR, Lampe FWContemporary Polymer Chemistry, 2nd ed., Prentice-Hall, Inc., New Jersey, NJ (1981)
  •  
  • 26. Oh SH, Lee JY, Ghil SH, Lee SS, Yuk SH, Lee JH, Biomaterials, 27, 1936 (2006)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2008; 32(4): 390-396

    Published online Jul 25, 2008

  • Received on Apr 15, 2008
  • Accepted on Jun 12, 2008