Article
  • PTCR Characteristics of Multifunctional Polymeric Nano Composites
  • Kim JC, Park GH, Suh SJ, Lee YK, Lee SJ, Lee SJ, Nam JD
  • PTCR 나노 복합기능 소재의 전류 차단 특성 연구
  • 김재철, 박기헌, 서수정, 이영관, 이성재, 이승재, 남재도
Abstract
Electrical characteristics of crystalline polymer composites filled with nano-sized carbon black particle were studied. The developed composite system exhibited a typical positive temperature coefficient resistance (PTCR) characteristic, where the electrical resistance sharply increased at a specific temperature. The PTCR effect was sometimes followed by a negative temperature coefficient resistance (NTCR) feature with temperature, which seemingly caused by the coagulation of nano-sized carbon black particles in the excessive quantity. The PTCR temperature was controlled by the carbon black content and the external voltage. The change of electric conductivity was shown as a function of carbon black content, and the resistance was constant when the carbon black content was over 20 wt%. The room-temperature resistance was maintained by a repeated heating and cooling. The excellent PTCR characteristic was demonstrated by the low resistance in the initial stage and the instantaneous heating capability.

본 연구에서는 나노 입자의 카본블랙을 결정성 고분자에 분산시켜 특정한 온도에서 저항이 급격하게 증가하는 positive temperature coefficient resistance (PTCR) 특성을 연구하였다. 열가소성 수지를 이용한 PTCR 소재를 열처리에 의하여 고분자의 큐리온도를 조절할 수 있었다. 나노 입자 카본블랙이 고분자 구조내에 고르게 분산이 되지 않고, 카본블랙의 함량이 과다하면 negative temperature coefficient resistance (NTCR) 현상이 발생하였다. 카본블랙의 함량과 내부전압을 조절함에 따라 발열 온도를 선정할 수 있었다. 카본블랙의 함량에 따라 전기 전도성이 다르게 나타났으며, 20 wt% 이상에서는 저항이 거의 일정하게 나타난다는 것을 확인하였다. 본 연구에서 제조된 PTCR 소재는 반복적인 가열 냉각에 따른 상온에서의 초기 저항의 변화가 거의 없어 재현성을 확인하였으며, 초기의 낮은 저항에 의한 순간적인 발열에 의하여 저온에서의 PTCR 성능이 향상되었다.

Keywords: positive temperature coefficient resistance (PTCR); conducting polymer; thermoplastic polymer; nano-sized carbon black; electrical resistance

References
  • 1. Supancic P, J. Eur. Ceram. Soc., 20, 2009 (2000)
  •  
  • 2. Strumpler R, Maidorn G, Rhyner J, J. Appl. Phys., 81, 6786 (1997)
  •  
  • 3. Huang ZZ, Yue R, Chan HLW, Choy CL, Polym. Compos., 19, 781 (1998)
  •  
  • 4. Yi XS, Wu G, Ma D, J. Appl. Polym. Sci., 67(1), 131 (1998)
  •  
  • 5. Chu EF, Thein NHU.S. Patent, 5,580,493 (1996)
  •  
  • 6. Meyer J, Polym. Eng. Sci., 13, 462 (1973)
  •  
  • 7. Hongawa K, Kawai T, Yokoyama AInternational Symposiumof Carbon, C10-07, p. 172, Tokyo (1998)
  •  
  • 8. Xi BF, Chen K, Liu FY, Xu CX, Zhang QYAsian International Conference on Dielectrics and Electrical Insulation and the 30th Symposium on Electrical Insulating Materials, Toyohashi, Japan, Sept., 27 (1998)
  •  
  • 9. Strumpler R, Skindhoj J, Glatz-Reichenbach J, Kuhlrfelt JHW, Perdoncin F, Trans. Power Delivery, 14, 425 (1999)
  •  
  • 10. Lee SJ, Nam JD, Suh SJ, Yoon JWKorea Patent, 10-2001-0027981 (2001)
  •  
  • 11. Lee SJ, Nam JD, Suh SJKorea Patent, 20-2001-0011056 (2001)
  •  
  • 12. Hall TJU.S. Patent, 6,059,997 (2000)
  •  
  • 13. Breuer O, Tchoudakov R, Narkis M, Siegmann A, J. Appl. Polym. Sci., 73(9), 1655 (1999)
  •  
  • 14. Cung KT, Sabo A, Pica AP, J. Appl. Phys., 53, 6867 (1982)
  •  
  • 15. Liu YW, Oshima K, Yamauchi T, Shimomura M, Miyauchi S, Synth. Met., 101, 451 (1999)
  •  
  • 16. Feng JY, Chan CM, Polymer, 41(19), 7279 (2000)
  •  
  • 17. Hindermann-Bischoff M, Ehrburger-Dolle F, Carbon, 39, 375 (2001)
  •  
  • 18. Ford RD, Vitkovitsky IMTransaction on Electrical Insulating, EI-20, 29 (1985)
  •  
  • 19. Feng JY, Chan CM, Polymer, 41(12), 4559 (2000)
  •  
  • 20. Wang DJ, Qiu J, Gui ZL, Li LT, J. Mater. Res., 14, 2993 (1999)
  •  
  • 21. Wang DJ, Qiu J, Guo YC, Gui ZL, Li LT, J. Mater. Res., 14, 120 (1999)
  •  
  • 22. Feingold AH, Amstutz P, Wahlers RL, Huang C, Stein SJ, IEMT/IME Proceeding, 138 (1998)
  •  
  • 23. Chatterjee S, Maiti HS, Mater. Chem. Phys., 67, 294 (2001)
  •  
  • 24. Xu WL, Tso SK, Tso Y, Trans. Ind. Electronics, 47, 454 (2000)
  •  
  • 25. Brogly M, Nardin M, Schultz J, J. Appl. Polym. Sci., 64(10), 1903 (1997)
  •  
  • 26. Hyundai Motor Company Standard Specification, Out-Side Rear View Mirror Heater Specification, ES 87602 (1994)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2002; 26(3): 367-374

    Published online May 25, 2002

  • Received on Oct 17, 2001
  • Accepted on Mar 8, 2002