Article
  • Thermal Degradation Kinetics of Poly(phenylene sulfide ketone)
  • Kim MS, Jeon IR, Seo KH
  • 폴리페닐렌설파이드케톤 열분해반응의 속도론적 관찰
  • 김무송, 전일련, 서관호
Abstract
In this study, thermal degradation kinetics of poly(phenylene sulfide ketone)[PPSK] was investigated with thermo-gravimetric analyzer(TGA). Their thermal degradation behaviors of PPSK were investigated by dynamic thermo-gravimetry, over the temperature range 200-700 ℃ and at various heating rates of 0.5, 1, 5, 10, 50, and 100 ℃/min, respectively. Maximum degradation temperatures were in the range of 448 ℃ and 631 ℃. To determine activation energy of thermal decomposition, Kissinger method, Ozawa method, and Friedman method were used and respective activation energies were 203, 234, and 232 kJ/mol. It is advantageous to use Ozawa method in determining thermal decomposition parameter of PPSK. These parameters indicate that this material has good thermal stability.

본 연구에서는 thermo-gravimetric analyzer (TGA)를 이용하여 폴리페닐렌설파이드케톤(PPSK)의 열분해 반응을 조사하였다. 적요된 온도범위는 200-700 ℃이며 승온속도는 각각 0.5, 1, 5, 10, 50, 100 ℃/min으로 측정하였다. 최대 분해온도는 448 ℃에서 631 ℃의 범위를 보였으며 열분해 활성화 에너지를 구하기 위해 Kissinger method, Ozawa method, Friedman method를 각각 적용하였다. 분해 활성화 에너지는 203, 234, 232 kJ/mol로 측정되었고 Ozawa method가 가장 유리한 것으로 나타났으며, 구해진 열분해 파라미터를 이용하여, PP나의 내열성을 평가한 결과 비교적 우수하다고 판단되었다.

Keywords: thermal stability; poly(phenylene sulfide ketone)

References
  • 1. Flynn JH, Polym. Eng. Sci., 20(10), 675 (1980)
  •  
  • 2. Schneider HADegradation and Stabilization of Polymers, ed. by H.H.G. Jeillinek, p. 506, Elsevier, Amsterdam (1983)
  •  
  • 3. Flynn JAspects of Degradation and Stabilization of Polymers, ed. by H.H.G. Jellinek, p. 573, Elseiver, Amsterdam (1978)
  •  
  • 4. MacCallum JR, Tanner J, Eur. Polym. J., 6, 907 (1970)
  •  
  • 5. Kissinger HE, Anal. Chem., 21, 1702 (1957)
  •  
  • 6. Varhegyi G, Thermochim. Acta, 110, 95 (1987)
  •  
  • 7. Ozawa T, Bull. Chem. Soc. Jpn., 38, 1881 (1965)
  •  
  • 8. Flynn JH, Wall LA, Polym. Lett., 4, 323 (1966)
  •  
  • 9. Doyle CD, J. Appl. Polym. Sci., 5, 285 (1961)
  •  
  • 10. Friedman HL, J. Polym. Sci., 6C, 183 (1964)
  •  
  • 11. Freeman ES, Carroll B, J. Phys. Chem., 62, 394 (1958)
  •  
  • 12. Flynn JH, Wall LA, J. Res. Nat. Breau Stds., 70A(6), 487 (1966)
  •  
  • 13. Anderson DA, Freeman ES, J. Polym. Sci., 54, 253 (1961)
  •  
  • 14. Chatterjee PK, J. Polym. Sci., 3A, 4253 (1965)
  •  
  • 15. Anderson HC, Makromol. Chem., 51, 233 (1962)
  •  
  • 16. Igarashi S, Kambe H, Bull. Chem. Soc. Jpn., 37, 176 (1964)
  •  
  • 17. Day M, Cooney JD, Wiles DM, J. Appl. Polym. Sci., 38, 323 (1989)
  •  
  • 18. Kim MS, Lim HS, Seo KH, Polym.(Korea), 22(4), 553 (1998)
  •  
  • 19. Wall LA, Florin RE, J. Res. Nat. Bureau Stds., 60, 451 (1958)
  •  
  • 20. Flynn JH, Thermochim. Acta, 37, 225 (1980)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1999; 23(3): 361-367

    Published online May 25, 1999