Article
  • Thermal and Mechanical Properties of Isotactic Polypropylene/Poly(propylene-co-1-hexene) Blends
  • Lee DH, Yoon KB
  • 이소탁틱 폴리프로필렌과 프로필렌/1-헥센 공중합체 블렌드의 열적 및 기계적 성질
  • 이동호, 윤근병
Abstract
In the binary blends of isotactic polypropylene(iPP), the effects of 1-hexone content and amount of propylene/1-hexone copolymer(PHC) on the thermal and mechanical properties and impact strength of the blends have been studied. The iPP/PHC blends gave a single glass transition temperature corresponding to intermediate of the constituents, however the melting temperature of the blends was almost unchanged. The size of spherulite decreased with PHC content, but did not affect the melting behavior. The addition of PHC decreased the modulus of the blends and increased the impact strength in a great extent.

결정성 이소탁틱 폴리프로필렌(iPP)과 프로필렌/1-헥센 공중합체(PHC)와의 용융 블렌드에서 PHC의 조성 및 함량 변화에 따른 블렌드의 열적 성질, 기계적 성질 및 충격강도등을 조사하였다. iPP/PHC 블렌드는 하나의 Tg를 나타내었고, PHC의 1-헥센 조성 및 함량이 증가할수록 Tg가 크게 감소하였다. 그러나 블렌드의 Tm은 큰 변화를 보여주지 않았으나, 녹음열은 PHC의 1-헥센 조성 및 함량이 증가할수록 감소하였다. 블렌드의 PHC 함량이 증가할수록 구정 크기가 감소하였으나, 전체 결정화 거동에는 큰 영향을 주지 않았다. PHC 함량이 증가할수록 블렌드는 iPP에 비해 ductile한 거동을 보이고 연신율은 크게 증가하였지만 탄성률은 감소하였다. 블렌드의 충격강도는 10% 정도의 PHC만 첨가되어도 70-80% 정도 크게 향상되었다.

Keywords: iPP; propylene/1-hexene copolymer; iPP/PHC binary blend; impact strength

References
  • 1. Martuscelli E, Silvestre C, Bianchi L, Polymer, 24, 1458 (1983)
  •  
  • 2. Gupta AK, Purwar SN, J. Appl. Polym. Sci., 29, 1079 (1984)
  •  
  • 3. Coppola F, Greco R, Ragosta G, Mater. Sci., 21, 1775 (1986)
  •  
  • 4. Stehling FC, Huff T, Speed CS, Wissler G, J. Appl. Polym. Sci., 26, 2693 (1981)
  •  
  • 5. Ho WJ, Salovy R, Polym. Eng. Sci., 21, 839 (1981)
  •  
  • 6. Chiu WY, Fang SJ, J. Appl. Polym. Sci., 30, 1473 (1985)
  •  
  • 7. Lee DH, Kim JT, Jeong YT, Polym.(Korea), 16(4), 451 (1992)
  •  
  • 8. Lee DH, Yoon KB, J. Appl. Polym. Sci., 54(10), 1507 (1994)
  •  
  • 9. Shih CK, Polym. Eng. Sci., 27, 458 (1987)
  •  
  • 10. Gupta AK, Ratnam BK, J. Appl. Polym. Sci., 42, 297 (1991)
  •  
  • 11. Greco R, Musto P, Riva F, Scarinzi G, Maglio GRubber-Toughened Plastics, ed. by C. Keith Riew (1989)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1996; 20(2): 218-223

    Published online Mar 25, 1996