Article
  • Mechanical Properties of Bifunctional/Tetrafunctional Epoxy Blends
  • Kim DS, Lee JR
  • 2 관능성/4 관능성 에폭시 블렌드의 기계적 특성
  • 김대수, 이재락
Abstract
Epoxy/epoxy blends composed of diglycidyl ether of bisphenol A(DBGBA) and 4.4'-tetraglycidyl diaminodiphenyl methane(TGDDM) were formulated with six different blend compositions and cured under five different cure conditions. Stoichiometric amount of diaminodipheny1 methane(DDM) was used to cure the epoxy blends. Glass transition temperatures of the epoxy blends were measured using a DSC(differential scanning calorimeter). Density Change with blend compositions was investigated. Effects of blend compositions and conditions on the tensile and impact strength of the cured epoxy/epoxy blend were investigated.

Diglycidyl ether of bisphenol A(DGEBA)와 4,4'-tetraglycidyl diaminodiphenyl methane(TGDDM)으로 구성된 에폭시 블렌드를 여섯가지 각기 다른 조성을 갖도록 배합하여 각기 다른 다섯가지 경화조건을 이용하여 경화시켰다. 에폭시 블렌드의 경화를 위하여 당랑비 만큼의 diaminodiphenyl methane(DDM)을 경화제로 첨가하였다. 에폭시 블렌드의 조성변화에 따른 유리 전이온도의 변화를 differential scanning calorimeter(DSC)를 이용하여 측정하였다. 에폭시 블렌드의 조성에 따른 밀도의 변화가 고찰되었다. 경화된 에폭시 블렌드의 인장강도 및 충격강도에 미치는 블렌드의 조성 및 경화조건 변화의 영향이 고찰되었다. 충격강도 시험에 의해서 생긴 에폭시 블렌드의 파단면을 관찰하기 위하여 광학 현미경을 이용하였다.

References
  • 1. Bucknall CB, Patridge JK, Polymer, 24, 639 (1983)
  •  
  • 2. Abrahim AM, Quinlivan TJ, Seferis JC, ACS Polym. Prepr., 26, 277 (1985)
  •  
  • 3. Sultan JN, MaGarry FJ, Polym. Eng. Sci., 13, 29 (1973)
  •  
  • 4. Enns JB, Gillham JK, Polym. Eng. Sci., 28, 2567 (1983)
  •  
  • 5. Kim DS, Kim SC, Polym. Adv. Technol., 1, 211 (1990)
  •  
  • 6. Guo Q, Peng X, Wang Z, Polymer, 32, 53 (1991)
  •  
  • 7. McGarry FJ, Proc. Royal Soc. London A, 319, 59 (1970)
  •  
  • 8. Riew CK, Gillham JKRubber Modified Thermoset Resins, ACS, Washington (1984)
  •  
  • 9. Gotro JT, Appelt BK, Papathomas KI, Polym. Compos., 8(1), 39 (1987)
  •  
  • 10. Scola DA, Pater RHThe Properties of Novel Bisimide Amine Cured Epoxy/Celion 6000 Graphite Fiber Composites, 13th National SAMPE Tech. Conf., Oct. 13-15 (1981)
  •  
  • 11. Woo EM, Chen LB, Seferis JC, J. Mater. Sci., 22, 3665 (1987)
  •  
  • 12. Chen YTResin Transfer Molding of Liquid Dicyanate: Chemorheology, Molding Experiments and Wetting Visualization, Ph.D. Thesis, Univ. of Minn. (1993)
  •  
  • 13. Eisenberg APhysical Properties of Polymers, J.E. Mark et al ed., American Chemical Society, Ch2 (1984)
  •  
  • 14. Fox TG, Bull. Am. Phys. Soc., 1, 123 (1956)
  •  
  • 15. Chompff AJPolymer Networks. Structure and Mechanical Properties, A.J. Chompff and S. Newman ed., Plenum Press, New York, p. 145 (1971)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1994; 18(2): 199-205

    Published online Mar 25, 1994