Article
  • Failure Analysis of High-density Polyethylene Pipe in Heat-transport Infrastructure of District Heating System

  • Hobyung Chae, Min Ji Song*, and Soo Yeol Lee*,†

  • Neutron Science Division, Korea Atomic Energy Research Institute, Daejeon 34057, Korea
    *Department of Materials Science and Engineering, Chungnam National University, Daejeon 34134, Korea

  • 지역난방 시스템의 열 수송 기반 시설 내 HDPE 관 파손 분석

  • 채호병 · 송민지* · 이수열*,†

  • 한국원자력연구원중성자과학부,*충남대학교신소재공학과

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Lund, H.; Thorsen, J. E.; Svendsen, S.; Werner, S.; Hvelplund, F.; Mathiesen, B. V.; Wiltshire, R. 4th Generation District Heating (4GDH). Energy 2014, 68, 1-11.
  •  
  • 2. Kim, Y.-S.; Kim, W.-C.; Kim, J.-G. Influence of Ultrasonic Nanocrystal Surface Modification on the Corrosion and Stress Corrosion Cracking Behavior of Low Carbon Steel (ASTM A139) Welded Joint in the Simulated District Heating Environment. Corrosion 2017, 74, 112-122.
  •  
  • 3. Sernhed, K.; Jönsson, M. Risk Management for Maintenance of District Heating Networks. In Energy Procedia; Elsevier B. V., 2017, 116, 381-393.
  •  
  • 4. Lidén, P.; Adl-Zarrabi, B. Non-Destructive Methods for Assessment of District Heating Pipes: A Pre-Study for Selection of Proper Methods. In Energy Procedia; Elsevier B. V., 2017, 116, 374-380.
  •  
  • 5. Hong, M.; Chae, H.; Kim, Y.; Song, M. J.; Cho, J.; Kim, W. C.; Ha, T. B.; Lee, S. Y. Flow-Accelerated Corrosion Analysis for Heat Recovery Steam Generator in District Heating System. Korean J. Mater. Res. 2019, 29, 11-15.
  •  
  • 6. Hong, M.; Chae, H.; Kim, W. C.; Kim, J.-G.; Kim, H.; Lee, S. Y. Failure Analysis of a Water Wall Boiler Tube for Power Generation in a District Heating System. Met. Mater. Int. 2019, 25, 1191-1201.
  •  
  • 7. Huang, E.-W.; Lee, S. Y.; Jain, J.; Tong, Y.; An, K.; Tsou, N.-T.; Lam, T.-N.; Yu, D.; Chae, H.; Chen, S.-W.; Chen, S.-M.; Chou, H.-S. Hardening Steels by the Generation of Transient Phase Using Additive Manufacturing. Intermetallics 2019, 109, 60-67.
  •  
  • 8. Hsuan, Y. G.; McGrath, T. J. NCHRP Report 429: HDPE Pipe: Recommended Material Specifications and Design Requirements; Transportation Research Board: Washington, DC, 1999.
  •  
  • 9. Zhang, J. Experimental Study of Stress Cracking in High Density Polyethylene Pipes; Drexel University: Philadelphia 2005.
  •  
  • 10. Zhao, J. Q.; Daigle, L.; Beaulieu, D. Effect of Joint Contamination on the Quality of Butt-Fused High-Density Polyethylene (HDPE) Pipe Joints. Can. J. Civ. Eng. 2002, 29, 787-798.
  •  
  • 11. Song, M. J.; Kim, W. C.; Kim, H.; Kim, J.; Lee, S. Y. Corrosion Failure Analysis of a Biogas Pipe. 2023, 36, 153-160.
  •  
  • 12. Song, M. J.; Choi, G.; Kim, W. C.; Lee, S. Y. Corrosion Protective Method Applicable to Air Vent Connected with a Heat Transport Pipe. Corros. Sci. Technol. 2023, 22, 115-122.
  •  
  • 13. Cho, J.; Chae, H.; Kim, H.; Kim, J. G.; Kim, W. C.; Lee, S. Y. Failure Analysis of Stress Reliever in Heat-Transport Pipe of District Heating System. Corros. Sci. Technol. 2022, 21, 243-249.
  •  
  • 14. Chae, H.; Kim, W. C.; Kim, H.; Kim, J. G.; Lee, S. Y. Failure Analysis of an Inlet Pipe of a Governor Valve in a Steam Turbine of a District Heating System. Corros. Sci. Technol. 2022, 21, 62-67.
  •  
  • 15. Kim, Y. S.; Chae, H.; Kim, W. C.; Jeong, J. C.; Kim, H.; Kim, J.-G.; Lee, S. Y. Failure Analysis on Localized Corrosion of Heat Transport Pipe in District Heating System. Corros. Sci. Technol. 2020, 19, 122-130.
  •  
  • 16. Olsson, M.; Jarfelt, U.; Fröling, M.; Ramnäs, O. The Polyethylene Casing as Diffusion Barrier for Polyurethane Insulated District Heating Pipes. Cell. Polym. 2001, 20, 37-48.
  •  
  • 17. Potts, C. G.; Draaijer, L. M. Developments in Rigid Polyurethane Foams for the Insulation of District Heating Pipelines. J. Cell. Plast. 1985, 21, 51-57.
  •  
  • 18. Başoĝul, Y.; Keçebaş, A. Economic and Environmental Impacts of Insulation in District Heating Pipelines. Energy 2011, 36, 6156-6164.
  •  
  • 19. Skagestad, B.; Mildenstein, P. District Heating and Cooling Connection Handbook; NOVEM; Netherlands Agency for Energy and the Environment: Sittard, 2002.
  •  
  • 20. Mangs, S. Insulation Materials in District Heating Pipes Environmental and Thermal Performance of Polyethylene Terephthalate and Polyurethane Foam. Doktorsavhandlingar vid Chalmers Tek. Hogsk. 2005, 2382, 1-76.
  •  
  • 21. Javaherdashti, R. Corrosion under Insulation (CUI): A Review of Essential Knowledge and Practice. J. Mater. Sci. Surf. Eng. 2014, 1, 36-43.
  •  
  • 22. Torrent, J.; Schwertmann, U.; Fechter, H.; Alferez, F. Quantitative Relationships between Soil Color and Hematite Content. Soil Sci. 1983, 136, 354-358.
  •  
  • 23. Pettijohn, F. J. Chemical Composition of Sandstones-Excluding Carbonate and Volcanic Sands. In Data of Geochemistry; Fleischer, M., Ed.; United States Goverment Printing Office, Washington, 1963; pp 1-19.
  •  
  • 24. Merah, N.; Saghir, F.; Khan, Z.; Bazoune, A. Effect of Temperature on Tensile Properties of HDPE Pipe Material. Plast. Rubber Compos. 2006, 35, 226-230.
  •  
  • 25. Ryu, H. W.; Han, J. J.; Kim, Y. J.; Kim, J. S.; Kim, J. H.; Jang, C. H. Development of a Short-Term Failure Assessment of High Density Polyethylene Pipe Welds - Application of the Limit Load Analysis - Application O. Trans. Korean Soc. Mech. Eng. A 2015, 39, 405-413.
  •  
  • 26. Krishnaswamy, R. K. Analysis of Ductile and Brittle Failures from Creep Rupture Testing of High-Density Polyethylene (HDPE) Pipes. Polymer 2005, 46, 11664-11672.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2024; 48(4): 376-383

    Published online Jul 25, 2024

  • 10.7317/pk.2024.48.4.376
  • Received on Dec 21, 2023
  • Revised on Feb 19, 2024
  • Accepted on Apr 19, 2024

Correspondence to

  • Soo Yeol Lee

  • Department of Materials Science and Engineering, Chungnam National University, Daejeon 34134, Korea

  • E-mail: sylee2012@cnu.ac.kr