Article
  • Mechanical Properties at Room and Elevated Temperatures According to the Thickness Ratio of Coextruded Film Using Polycarbonate and Acrylic Resin

  • Hyun-Myung Son, Chang-Whan Lee, Seok-Ho Yoon*, Ki-ho Lee*, and Min-Young Lyu†

  • Department of Mechanical Information Engineering, Graduate School of Seoul National University of Science and Technology Gongneung-ro, Nowon-gu, Seoul 01811, Korea
    *I-Components Co., Ltd., 74, Chupalsandan 1-gil, Paengseong-eup, Pyeongtaek-si 17998, Korea

  • 폴리카보네이트와 아크릴 수지를 이용한 공압출 필름의 두께 비에 따른 상온 및 고온의 기계적 물성

  • 손현명 · 이창환 ·윤석호* · 이기호* ·류민영†

  • 서울과학기술대학교 기계정보공학과, *㈜i-components

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Shin, Y. B.; Ju, Seo, Y. H.; Lee, I. S.; Kim, C. R.; Kong, Y. N.; K. J.; Kim, J. W. Modified Inverted Layer Processing of Ultrathin Touch Sensor Impregnating Ag Nanowires with Both Enlarged Surface Coverage of Conductive Pathways and Ultralow Roughness. Electr. Mater. Lett. 2020, 16, 247-254.
  •  
  • 2. Hwang, B. Y.; Choi, S. H.; Lee, K. W.; Kim, J. Y. Highly Stretchable and Transparent Electrode Film Based on SWCNT/Silver Nanowire Hybrid Nanocomposite. Composites Part B 2018, 151, 1-7.
  •  
  • 3. Vaishnav, V. S.; Patel, S. G.; Panchal, J. N. Development of ITO Thin Film Sensor for Detection of Benzene. Sensors Actuators, B 2015, 206, 381-388.
  •  
  • 4. Kim, H. K.; Lee, S.; Yun, K. S. Capacitive Tactile Sensor Array for Touch Screen Application. Sensors and Actuators A: Physical 2011, 165, 2-7.
  •  
  • 5. Koziey, B. L.; Ghafur, M. O.; Vlachopoulos, J.; Mirza, F. A. Computer Simulation of Thermoforming. In Compos. Mater. Series 1997, 11, 75-89.
  •  
  • 6. Lyu, M.-Y. Principles and Applications of Injection Molding; Gyomoonsa: Seoul, 2022.
  •  
  • 7. Choi, M. S. A Study on the Elongation of Polymer Extrusion Film. J. Korea Academia-Industrial Cooperation Soc. 2014, 15, 660-665.
  •  
  • 8. Lee, K. H.; Kim, H. Y.; La, Y. M.; Lee, D. R.; Sung, N. H. Influence of a Mixing Solvent with Tetrahydrofuran and N, N-dimethylformamide on Electrospun Poly(vinyl chloride) Nonwoven Mats. J. Polym. Sci., Part B: Polym. Phys. 2002, 40, 2259-2268.
  •  
  • 9. Lee, J. G.; Park, S. H.; Kim, S. H. Investigation of Properties of the PET Film Dependent on the Biaxial Stretching. Polym. Korea 2010, 34, 579-587.
  •  
  • 10. Abbasi, S.; Carreau, P. J.; Derdouri, A. Flow Induced Orientation of Multiwalled Carbon Nanotubes in Polycarbonate Nanocomposites: Rheology, Conductivity and Mechanical Properties. Polymer, 2010, 51, 922-935.
  •  
  • 11. Chen, S. C.; Huang, S. T.; Lin, M. C.; Chien, R. D. Study on the Thermoforming of PC Films Used for In-mold Decoration. Int. Commun. Heat Mass Transfer. 2008, 35, 967-973.
  •  
  • 12. Zidan, H. M.; Abu-Elnader, M. Structural and Optical Properties of Pure PMMA and Metal Chloride-doped PMMA Films. Physica B. 2005, 355, 308-317.
  •  
  • 13. Lalande, L.; Plummer, C. J.; Månson, J. A. E.; Gérard, P. Microdeformation Mechanisms in Rubber Toughened PMMA and PMMA-based Copolymers. Eng. Fracture Mech. 2006, 73, 2413-2426.
  •  
  • 14. Xu, Y., Qin; J., Shen, J.; Guo, S.; Lamnawar, K. Scratch Behavior and Mechanical Properties of Alternating Multi-layered PMMA/PC Materials. Wear, 2021, 486, 204069.
  •  
  • 15. Jo, I. S.; Woo, H. Y.; Manufacture and Applications of Nylon Films. Polym. Sci. Technol. 2001, 12, 223-232.
  •  
  • 16. Son, H. M.; Yoon, S. H.; Lee, K. H.; Lyu, M. Y. 3-Dimensional Thermoforming Computer Simulation Considering Orthotropic Property of Film. Elast. Compos. 2022, 57, 114-120.
  •  
  • 17. Rao, Y.; Greener, J.; Avila-Orta, C. A.; Hsiao, B. S.; Blanton, T. N. The Relationship Between Microstructure and Toughness of Biaxially Oriented Semicrystalline Polyester Films. Polymer 2008, 49, 2507-2514.
  •  
  • 18. Lee, J. G.; Park, S. H.; Kim, S. H. Investigation of Properties of the PET Film Dependent on the Biaxial Stretching. Polym. Korea 2010, 34, 579-587.
  •  
  • 19. Horvath, T.; Kalman, M.; Szabo, T.; Roman, K.; Zsoldos, G.; Szabone Kollar, M. The Mechanical Properties of Polyethylene-terephthalate (PET) and Polylactic-acid (PDLLA and PLLA), the Influence of Material Structure on Forming. In IOP Conference Series: Mater. Sci. Eng. 2018, 426, 012018.
  •  
  • 20. Hashemi, S. Temperature and Deformation Rate Dependence of the Work of Fracture in Polycarbonate (PC) Film. J. Mater. Sci. 2000, 35, 5851-5856.
  •  
  • 21. Phillips, C. O.; Claypole, T. C.; Gethin, D. T. Mechanical Properties of Polymer Films Used in In-mould Decoration. J. Mater. Process. Technol. 2008, 200, 221-231.
  •  
  • 22. Arabeche, K.; Delbreilh, L.; Saiter, J. M.; Michler, G. H.; Adhikari, R.; Baer, E. Fragility and Molecular Mobility in Micro-and Nano-layered PC/PMMA Films. Polymer 2014, 55, 1546-1551.
  •  
  • 23. Arabeche, K.; Delbreilh, L.; Adhikari, R.; Michler, G. H.; Hiltner, A.; Baer, E.; Saiter, J. M. Study of the Cooperativity at the Glass Transition Temperature in PC/PMMA Multilayered Films: Influence of Thickness Reduction from Macro-to Nanoscale. Polymer, 2012, 53, 1355-1361.
  •  
  • 24. Scholtyssek, S.; Seydewitz, V.; Adhikari, R.; Pfeifer, F.; Michler, G. H.; Siesler, H. W. Influence of Laminate Thickness Reduction on the Deformation Mechanism of Coextruded Multilayered PC/PMMA Films. J. Appl. Polym. Sci. 2013, 127, 4262-4272.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2023; 47(6): 757-765

    Published online Nov 25, 2023

  • 10.7317/pk.2023.47.6.757
  • Received on Jul 21, 2023
  • Revised on Aug 9, 2023
  • Accepted on Aug 16, 2023

Correspondence to

  • Min-Young Lyu

  • Department of Mechanical Information Engineering, Graduate School of Seoul National University of Science and Technology Gongneung-ro, Nowon-gu, Seoul 01811, Korea

  • E-mail: mylyu@seoultech.ac.kr