Article
  • Effects of Concentration and Temperature of NaOH Solution for Alkali Treatment of Coir Fiber Mat on the Mechanical Properties of Coir Fiber Mat/Unsaturated Polyester Composites
  • Kihyun Kim and Donghwan Cho

  • Department of Polymer Science and Engineering, Kumoh National Institute of Technology, Gumi, Gyeongbuk 39177, Korea

  • 코이어섬유매트의 알칼리처리에 사용한 NaOH 용액의 농도와 온도가 코이어섬유매트/불포화폴리에스터 복합재료의 기계적 특성에 미치는 영향
  • 김기현 · 조동환

  • 금오공과대학교 고분자공학과

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Mohanty, A. K.; Misra, M.; Drzal, L. T., Eds. Natural Fibers, Biopolymers, and Biocomposites; Taylor & Francis: Boca Raton, USA, 2005.
  •  
  • 2. Cho, D.; Lee, S. G.; Park, W. H.; Han, S. O. Eco-Friendly Biocomposite Materials Using Biofibers. Polym. Sci. Technol. 2002, 13, 460-476.
  •  
  • 3. Cho, D. Green Composites Using Environmentally Friendly Natural Fibers. Plast. Magazine 2006, 22, 44-51.
  •  
  • 4. Monhanty, A. K.; Misra, M.; Drzal, L. T. Sustainable Bio-Composites from Renewable Resources: Opportunities and Challenges in the Green Materials World. J. Polym. Environ. 2002, 1, 19-26.
  •  
  • 5. Netravali, A. N.; Chabba, S. Composites Get Greener. Mater. Today 2003, 6, 22-29.
  •  
  • 6. Joseph, S.; Sreekala, M. S.; Oommen, Z.; Koshy, P.; Thomas, S. A Comparison of the Mechanical Properties of Phenol Form- aldehyde Composites Reinforced with Banana Fibres and Glass Fibres. Compos. Sci. Technol. 2002, 62, 1857-1868.
  •  
  • 7. Joshi, S. V.; Drzal, L. T.; Mohanty, A. K.; Arora, S. Are Natural Fiber Composites Environmentally Superior to Glass Fiber Reinforced Composites?. Compos. Part A 2004, 35, 371-378.
  •  
  • 8. Mohanty, A. K.; Misra, M.; Hinrichsen, G. Biofibers, Biodegradable Polymers and Biocomposites: An Overview. Macromol. Mater. Eng. 2000, 276-277, 1-24.
  •  
  • 9. Bledzki, A. K.; Gassan, J. Composites Reinforced with Cellulose Based Fibres. Prog. Polym. Sci. 1999, 24, 221-274.
  •  
  • 10. Cho, D.; Kim, H.-J.; Drzal, L. T. Surface Treatment and Characterization of Natural Fiber: Effects on the Properties of Biocomposites. In Polymer Composites Volume 3: Biocomposites; Thomas, S., Joseph, K., Malhotra, S. K., Goda, K., Sreekala, M. S., Eds.; Wiley-VCH Verlag GmbH & Co, KGaA: Weinhein, Germany, 2013; pp 133-177.
  •  
  • 11. Aziz, S. H.; Ansell, M. P.; Clarke, S. J.; Panteny, S. R. Modified Polyester Resin for Natural Fibre Composites. Compos. Sci. Technol. 2005, 65, 525-535.
  •  
  • 12. Cho, D.; Yoon, S. B.; Drzal, L. T. Cellulose-Based Natural Fiber Topography and the Interfacial Shear Strength of Henequen/Unsaturated Polyester Composites: Influence of Water and Alkali Treatments. Compos. Interf. 2009, 16, 769-779.
  •  
  • 13. Brahmakumar, M.; Pavitithran, C.; Pillai, R. M. Coconut Fibre Reinforced Polyethylene Composites: Effect of Natural Waxy Surface Layer of the Fibre on Fibre/Matrix Interfacial Bonding and Strength of Composites. Compos. Sci. Technol. 2005, 65, 563-569.
  •  
  • 14. Rot, K.; Huskić, M.; Makarovič, M.; Mlakar, T. L.; Zigon, M. Interfacial Effects in Glass Fibre Composites as A Function of Unsaturated Polyester Resin Composition. Composites Part A 2001, 32, 511-516.
  •  
  • 15. Rout, J.; Misra, M.; Tripathy, S. S.; Nayak, S. K.; Mohanty, A. K. The Influence of Fibre Treatment on the Performance of Coir-Polyester Composites. Compos. Sci. Technol. 2001, 61, 1303-1310.
  •  
  • 16. Mohanty, A. K.; Misra, M.; Drzal, L. T. Surface Modifications of Natural Fibers and Performance of the Resulting Biocomposites: An Overview. Compos. Interf. 2001, 8, 313-343.
  •  
  • 17. Goda, K.; Sreekala, M. S.; Gomes, A.; Kaji, T.; Ohgi, J. Improvement of Plant-Based Natural Fibers for Toughening Green Composites-Effect of Load Application During Merceri- zation of Ramie Fibers. Composites Part A 2006, 37, 2213-2220.
  •  
  • 18. Abdelmouleh, M.; Boufi, S.; Belgacem, M. N.; Dufresne, A. Short Natural-Fibre Reinforced Polyethylene and Natural Rubber Composites: Effect of Silane Coupling Agents and Fibres Loading. Compos. Sci. Technol. 2007, 67, 1627-1639.
  •  
  • 19. Ji, S. G.; Hwang, J. H.; Cho, D.; Kim, H.-J. Influence of Electron Beam Treatment of Jute on the Thermal Properties of Random and Two-Directional Jute/Poly(lactic acid) Green Composites. J. Adhes. Sci. Technol. 2013, 27, 1359-1373.
  •  
  • 20. Nishio, T.; Hirao, K.; Kotera, M.; Nakamae, K.; Inagaki, H. Kenaf Reinforced Biodegradable Composite. Compos. Sci. Technol. 2003, 63, 1281-1286.
  •  
  • 21. Van de Weyenbreg, I.; Iven, J.; De Coster, A.; Kino, B.; Baetens, E.; Verpoest, I. Influence of Processing and Chemical Treatment of Flax Fibres on Their Composites. Compos. Sci. Technol. 2003, 63, 1241-1246.
  •  
  • 22. Lee, H. S.; Cho, D.; Han, S. O. Effect of Natural Fiber Surface Treatments on the Interfacial and Mechanical Properties of Henequen/Polypropylene Biocomposites. Macromol. Res. 2008, 16, 411-417.
  •  
  • 23. Kim, J. T.; Netravali, A. N. Mercerization of Sisal Fibers: Effect of Tension on Mechanical Properties of Sisal Fiber and Fiber-Reinforced Composites. Composites Part A 2010, 45, 1245-1252.
  •  
  • 24. Noori, A.; Lu, Y.; Saffari, P.; Liu, J.; Ke, J. The Effect of Mercerization on Thermal and Mechanical Properties of Bamboo Fibers as A Biocomposite Material: A Review. Constr. Build. Mater. 2021, 279, 122519.
  •  
  • 25. Cho, D.; Seo, J. M.; Park, W. H.; Han, S. O.; Hwang, T. W.; Choi, C. H.; Jung, S. J. Fiber Surface Treatments for Improvement of the Interfacial Adhesion and Flexural and Thermal Properties of Jute/Poly(lactic acid) Biocomposites. J. Biobased Mater. Bioener. 2007, 1, 331-340.
  •  
  • 26. Huda, S.; Drzal, L. T.; Mohanty, A. K.; Misra, M. Effect of Fiber Surface-Treatments on the Properties of Laminated Biocomposites from Poly(lactic acid) (PLA) and Kenaf Fibers. Compos. Sci. Technol. 2008, 68, 424-432.
  •  
  • 27. Rahman, M. M.; Khan, M. A. Surface Treatment of Coir (Cocos nucifera) Fibers and Its Influence on the Fibers’ Physico-Mechanical Properties. Compos. Sci. Technol. 2007, 67, 2369-2376.
  •  
  • 28. Han, Y. H.; Han, S. O.; Cho, D.; Kim, H.-I. Kenaf/Polypropylene Biocomposites: Effects of Electron Beam Irradiation and Alkali Treatment on Kenaf Natural Fibers. Compos. Interf. 2007, 14, 559-578.
  •  
  • 29. Kim, Y.; Cho, D.; Park, W. H.; Kwon, O. H. Novel Silk Fibroin Fiber-Reinforced Poly(butylene succinate) Biocomposites: Electron Beam Treatment Effect of Silk on the Interfacial, Thermal, Mechanical and Impact Properties. J. Biobased Mater. Bioener. 2014, 8, 261-272.
  •  
  • 30. Lee, J. Y.; Cho, D. Effect of Silane Treatment of Lyocell Fabric on the Mechanical and Thermal Properties of Lyocell/Poly(lactic acid) Composites Polymer(Korea) 2018, 42, 125-132.
  •  
  • 31. Jeong, N.; Cho, D. Effect of Prepreg Angle-Ply on the Dynamic Mechanical, Tensile, Flexural, and Impact Properties of Non-Crimp Carbon Fiber Fabric/Epoxy Composites. Polymer(Korea) 2020, 44, 61-69.
  •  
  • 32. Jung, S.; Cho, D. Effect of Fiber Feeding Route upon Extrusion Process on the Electromagnetic, Mechanical, and Thermal Pro- perties of Nickel-Coated Carbon Fiber/Polypropylene Composites. Composites Part B 2020, 187, 107861.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2021; 45(4): 501-510

    Published online Jul 25, 2021

  • 10.7317/pk.2021.45.4.501
  • Received on Jan 4, 2021
  • Revised on Mar 8, 2021
  • Accepted on Mar 16, 2021

Correspondence to

  • Donghwan Cho
  • Department of Polymer Science and Engineering, Kumoh National Institute of Technology, Gumi, Gyeongbuk 39177, Korea

  • E-mail: dcho@kumoh.ac.kr