Article
  • Coating of Heat-resistant Polymeric Layer to Enhance Thermal Stability of Microporous Polyethylene Separator for Lithium-ion Secondary Battery

  • Jungmoon Sung, Junyoung Park, and Hyun Wook Jung†

  • Department of Chemical and Biological Engineering, Korea University, Seoul 02841, Korea

  • 리튬이온 이차전지용 미세다공성 폴리에틸렌 분리막의 열적 안정성 향상을 위한 내열 고분자층 코팅

  • 성정문 · 박준영 · 정현욱†

  • 고려대학교화공생명공학과

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Blomgren, G. E. The development and future of lithium ion batteries. J. Electrochem. Soc. 2017, 164, A5019.
  •  
  • 2. Hannan, M. A.; Lipu, M. S. H.; Hussain, A.; Mohamed, A. A Review of Lithium-ion Battery State of Charge Estimation and Management System in Electric Vehicle Applications: Challenges and Recommendations. Renew. Sust. Energ. Rev. 2017, 78, 834-854.
  •  
  • 3. Yin, D.; Mu, D.; Wu, B.; Wang, R.; Zhao, Z.; Wu, F. Recent Progresses on Nickel-rich Layered Oxide Positive Electrode Materials Used In Lithium-ion Batteries for Electric Vehicles. Appl. Energy 2017, 195, 586-599.
  •  
  • 4. Jiang, Y.; Liu, Z.; Zhang, Y.; Hu, H.; Teng, X.; Wang, D.; Gao, P.; Zhu, Y. Full-gradient structured LiNi0.8Co0.1Mn0.1O2 Cathode Material with Improved Rate and Cycle Performance for Lithium Ion Batteries. Electrochim. Acta 2019, 309, 74-85.
  •  
  • 5. Terranova, M. L.; Orlanducci, S.; Tamburri, E.; Guglielnotti, V.; Rossi, M. Si/C Hybrid Nanostructures for Li-ion Anodes: an Overview. J. Power Sources 2014, 246, 167-177.
  •  
  • 6. Zuo, X.; Zhu, J.; Muller-Buschbaum, P.; Cheng, Y. J. Silicon Based Lithium-ion Battery Anodes: A Chronicle Perspective Review. Nano Energy 2017,31, 113-143.
  •  
  • 7. Wang, Q.; Jiang, L.; Yu, Y.; Sun, J. Progress of Enhancing the Safety of Lithium Ion Battery from the Electrolyte Aspect. Nano Energy 2019, 55, 93-114.
  •  
  • 8. Chen, J.; Wu, J.; Wang, X.; Zhou, A.; Yang, Z. Research Progress and Application Prospect of Solid-state Electrolytes in Commercial Lithium-ion Power Batteries. Energy Storage Mater. 2021, 35, 70-87.
  •  
  • 9. Zhang, S. S. A Review on the Separators of Liquid Electrolyte Li-ion Batteries. J. Power Sources 2007, 164, 351-364.
  •  
  • 10. Huang, X. Separator Technologies for Lithium-ion Batteries. J. Solid State Electrochem. 2010, 15, 649-662.
  •  
  • 11. Arora, P.; Zhang, Z. Battery Separators. Chem. Rev. 2004, 104, 4419-4462.
  •  
  • 12. Lin, Y.; Meng, L.; Wu, L.; Li, X.; Chen, X.; Zhang, Q.; Zhang, Q.; Zhang, R.; Li, L. A Semi-quantitative Deformation Model for Pore Formation in Isotactic Polypropylene Microporous Membrane. Polymer 2015, 80, 214-227.
  •  
  • 13. Francis, C. F. J.; Kyratzis, I. L.; Best, A. S. Lithium‐Ion Battery Separators for Ionic‐Liquid Electrolytes: A Review. Adv. Mater. 2020, 32, 1904205.
  •  
  • 14. Lagadec, M. F.; Zahn, R.; Wood, V. Characterization and Performance Evaluation of Lithium-ion Battery Separators. Nat. Energy 2019, 4, 16-25.
  •  
  • 15. Li, Y.; Pu, H.; Wei, Y. Polypropylene/Polyethylene Multilayer Separators with Enhanced Thermal Stability for Lithium-ion Battery via Multilayer Coextrusion. Electrochim. Acta 2018, 264, 140-149.
  •  
  • 16. Xu, G.; Ding, L.; Wu, T.; Xiang, M.; Yang, F. Effect of High Molecular Weight on Pore Formation and Various Properties of Microporous Membrane Used for Lithium-ion Battery Separator. J. Polym. Res. 2018, 25, 166.
  •  
  • 17. Hao, J.; Lei, G.; Li, Z.; Wu, L.; Xiao, Q. Wang, L. A Novel Polyethylene Terephthalate Nonwoven Separator Based on Electrospinning Technique for Lithium Ion Battery. J. Membr. Sci. 2013, 428, 11-16.
  •  
  • 18. Chung, Y. S.; Yoo, S. H.; Kim, C. K. Enhancement of Meltdown Temperature of the Polyethylene Lithium-ion Battery Separator via Surface Coating with Polymers Having High Thermal Resistance. Ind. Eng. Chem. Res. 2009, 48, 4346-4351.
  •  
  • 19. Liang, X.; Yang, Y.; Jin, X.; Huang, Z.; Kang, K. The High Performances of SiO2/Al2O3-coated Electrospun Polyimide Fibrous Separator for Lithium-ion Battery. J. Membr. Sci. 2015, 493, 1-7.
  •  
  • 20. Wang, L. C.; Harvey, M. K.; Ng, J. C.; Scheunemann, U. Ultra-high Molecular Weight Polyethylene (UHMW-PE) and Its Application in Microporous Separators for Lead/acid Batteries. J. Power Sources 1998, 73, 74-77.
  •  
  • 21. Xiong, B.; Chen, R.; Zeng, F.; Kang, J.; Men, Y. Thermal Shrinkage and Microscopic Shutdown Mechanism of Polypropylene Separator for Lithium-ion Battery: In-situ Ultra-small Angle X-ray Scattering Study. J. Membr. Sci. 2018, 545, 213-220.
  •  
  • 22. Wang, S.; Saffar, A.; Ajji, A.; Wu, H.; Guo, S. Fabrication of Microporous Membranes from Melt Extruded Polypropylene Precursor Films via Stretching: Effect of Annealing. J. Polym. Sci. 2015, 33, 1028-1037.
  •  
  • 23. Cho, T. H.; Tanaka, M.; Onishi, H.; Kondo, Y. Battery Performances and Thermal Stability of Polyacrylonitrile Nano-fiber-based Nonwoven Separators for Li-ion Battery. J. Power Sources 2008, 181, 155-160.
  •  
  • 24. Yang, C.; Jia, Z.; Guan, Z.; Wang, L. Polyvinylidene Fluoride Membrane by Novel Electrospinning System for Separator of Li-ion Batteries. J. Power Sources 2009, 189, 716-720.
  •  
  • 25. Miao, Y. E.; Zhu, G. N.; Hou, H.; Xia, Y. Y.; Liu, T. Electrospun Polyimide Nanofiber-based Nonwoven Separators for Lithium-ion Batteries. J. Power Sources 2013, 226, 82-86.
  •  
  • 26. Raja, M.; Angulakshmi, N.; Thomas, S.; Kumar, T. P.; Manuel Stephan, A. Thin, Flexible and Thermally Stable Ceramic Membranes as Separator for Lithium-ion Batteries. J. Membr. Sci. 2014, 471, 10-1109.
  •  
  • 27. Zhao, X.; Zhang, Z.; Yang, S.; Liang, G. Inorganic Ceramic Fiber Separator for Electrochemical and Safety Performance Improvement of Lithium-ion Batteries. Ceram. Int. 2017, 43, 14775-14783.
  •  
  • 28. Huang, X.; Hitt, J. Lithium Ion Battery Separators: Development and Performance Characterization of a Composite Membrane. J. Membr. Sci. 2013,425, 163-168.
  •  
  • 29. Wang, J.; Hu, Z.; Yin, X.; Li, Y.; Huo, H.; Zhou, J.; Li, L. Alumina/phenolphthalein Polyetherketone Ceramic Composite Polypropylene Separator Film for Lithium Ion Power Batteries. Electrochim. Acta 2015, 159, 61-65.
  •  
  • 30. Shi, C.; Zhang, P.; Chen, L.; Yang, P.; Zhao, J. Effect of a Thin Ceramic-coating Layer on Thermal and Electrochemical Properties of Polyethylene Separator For Lithium-ion Batteries. J. Power Sources 2014, 270, 547-553.
  •  
  • 31. Jeong, H. S.; Kim, D. W.; Jeong, Y. U.; Lee, S. Y. Effect of Phase Inversion on Microporous Structure Development of Al2O3/Poly(vinylidene fluoride-hexafluoropropylene)-based Ceramic Composite Separators For Lithium-ion Batteries. J. Power Sources 2010, 195, 6116.
  •  
  • 32. Kim, M.; Han, G. Y.; Yoon, K. J.; Park J. H. Preparation of a Trilayer Separator and its Application to Lithium-ion Batteries. J. Power Sources 2010, 195, 8302.
  •  
  • 33. Whitaker, S. Flow in Porous Media I: A Theoretical Derivation of Darcy’s Law. Transp. Porous Media 1986, 1, 3-25.
  •  
  • 34. Torquato, S. Random Heterogeneous Materials; Springer Science Business Media: New York, 2002.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2021; 45(3): 456-463

    Published online May 25, 2021

  • 10.7317/pk.2021.45.3.456
  • Received on Feb 2, 2021
  • Revised on Feb 18, 2021
  • Accepted on Feb 20, 2021

Correspondence to

  • Hyun Wook Jung

  • Department of Chemical and Biological Engineering, Korea University, Seoul 02841, Korea

  • E-mail: hwjung@grtrkr.korea.ac.kr