Article
  • Evaluation of Tensile Properties of Glass/Sisal and Glass/Jute Fibers Reinforced Hybrid Composites at Different Stacking Sequences

  • Muhammad Yasir Khalid† , Ans Al Rashid*, Zulkarnain Abbas**, Naveed Akram***, ****, Zia Ullah Arif, and Fausto Pedro García Márquez*****,†

  • Department of Mechanical Engineering, University of Management & Technology Lahore, Sialkot Campus, 51041, Pakistan
    *Division of Sustainable Development, College of Science and Engineering, Hamad Bin Khalifa University, Qatar Foundation Doha, 0000, Qatar
    **Department of Mechanical Engineering NFC Institute of Engineering and Technology, Multan, Pakistan
    ***Department of Mechanical Engineering, Mirpur University of Science and Technology (MUST),
    New Mirpur City, Azad Jammu and Kashmir, 10250, Pakistan
    ****Department of Mechanical Engineering, Faculty of Mechanical Engineering, University of Malaya, Kuala Lumpur, 50603, Malaysia
    *****Ingenium Research Group, University of Castilla-La Mancha, 13071 Ciudad Real, Spain

  • Stacking Sequences에 따른 Glass/Sisal과 Glass/Jute Fiber로 강화된 복합체의 연신 특성 평가

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Al Rashid, A.; Khan, S. A.; Al-Ghamdi, S. G.; Koç, M. Additive Manufacturing: Technology, Applications, Markets, and Opportunities for The Built Environment. Autom. Constr. 2020, 118, 103268.
  •  
  • 2. Gholampour, A.; Ozbakkaloglu, T. A Review of Natural Fiber Composites: Properties, Modification and Processing Techniques, Characterization, Applications. J. Mater. Sci. 2020, 55, 829-892.
  •  
  • 3. Jaafar, J.; Siregar, J. P.; Salleh, S. M.; Hamdan, M. H. M.; Cionita, T.; Rihayat, T. Important Considerations in Manufacturing of Natural Fiber Composites: A Review. Int. J. Precis. Eng. Manuf.- Green Technol. 2019, 6, 647-664.
  •  
  • 4. Khalid, M. Y.; Nasir, M. A.; Ali, A.; Al Rashid, A.; Khan, M. R. Experimental and Numerical Characterization of Tensile Property of Jute/Carbon Fabric Reinforced Epoxy Hybrid Composites. SN Appl. Sci. 2020, 2, 1-10.
  •  
  • 5. Ali, A.; Nasir, M. A.; Khalid, M. Y.; Nauman, S.; Shaker, K.; Khushnood, S.; Altaf, K.; Zeeshan, M.; Hussain, A. Experimental and Numerical Characterization of Mechanical Properties of Carbon/Jute Fabric Reinforced Epoxy Hybrid Composites. J. Mech. Sci. Technol. 2019, 33, 4217-4226.
  •  
  • 6. Badie, M. A.; Mahdi, E.; Hamouda, A. An Investigation Into Hybrid Carbon/Glass Fiber Reinforced Epoxy Composite Automotive Drive Shaft. Mater. Des. 2011, 32, 1485-1500.
  •  
  • 7. Faruk, O.; Bledzki, A. K.; Fink, H.-P.; Sain, M. Biocomposites Reinforced with Natural Fibers: 2000-2010. Prog. Polym. Sci. 2012, 37, 1552-1596.
  •  
  • 8. Balla, V. K.; Kate, K. H.; Satyavolu, J.; Singh, P.; Tadimeti, J. G. D. Additive Manufacturing of Natural Fiber Reinforced Polymer Composites: Processing and Prospects. Composites Part B 2019, 174, 106956.
  •  
  • 9. Khalid, M. Y.; Rashid, A. A.; Arif, Z. U.; Akram, N.; Arshad, H.; García Márquez, F. P. Characterization of Failure Strain in Fiber Reinforced Composites: Under On-Axis and Off-Axis Loading. Cryst. 2021, 11, 216.
  •  
  • 10. Acharya, S.; Bera, T.; Prakash, V.; Pradhan, S. Effect of Stacking Sequence on the Tribological Behaviour of Jute-glass Hybrid Epoxy Composite. Mater. Today: Proc. 2020, 28, 936-939.
  •  
  • 11. Ouarhim, W.; Essabir, H.; Bensalah, M.-O.; Rodrigue, D.; Bouhfid, R. Hybrid Composites and Intra-ply Hybrid Composites Based on Jute and Glass Fibers: A Comparative Study on Moisture Absorption and Mechanical Properties. Mater. Today Commun. 2020, 22, 100861.
  •  
  • 12. Sumesh, K.; Kanthavel, K.; Kavimani, V. Peanut Oil Cake-derived Cellulose Fiber: Extraction, Application of Mechanical and Thermal Properties in Pineapple/Flax Natural Fiber Composites. Int. J. Biol. Macromol. 2020, 150, 775-785.
  •  
  • 13. Al Rashid, A.; Khalid, M. Y.; Imran, R.; Ali, U.; Koc, M. Utilization of Banana Fiber-Reinforced Hybrid Composites in the Sports Industry. Mater. 2020, 13, 3167.
  •  
  • 14. Ebrahimnezhad-Khaljiri, H.; Eslami-Farsani, R.; Akbarzadeh, E. Effect of Interlayer Hybridization of Carbon, Kevlar, and Glass Fibers with Oxidized Polyacrylonitrile Fibers on the Mechanical Behaviors of Hybrid Composites. Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci. 2020, 234, 1823-1835.
  •  
  • 15. Khan, Z.; Yousif, B.; Islam, M. Fracture Behaviour of Bamboo Fiber Reinforced Epoxy Composites. Composites Part B 2017,116, 186-199.
  •  
  • 16. Dhawan, V.; Singh, S.; Singh, I. Effect of Natural Fillers on Mechanical Properties of GFRP Composites. J. Compos. 2013, 2013, 792620.
  •  
  • 17. Kumar, R.; Ul Haq, M. I.; Raina, A.; Anand, A. Industrial Applications of Natural Fibre-reinforced Polymer Composites-Challenges and Opportunities. Int. J. Sustain. Eng. 2019, 12, 212-220.
  •  
  • 18. Thilagavathi, G.; Pradeep, E.; Kannaian, T.; Sasikala, L. Development of Natural Fiber Nonwovens for Application as Car Interiors for Noise Control. J. Ind. Text. 2010, 39, 267-278.
  •  
  • 19. Lima, A. V.; Cardoso, J. L.; Lobo, C. J. Research on Hybrid Sisal/Glass Composites: A Review. J. Reinf. Plast. Compos. 2019, 38, 789-821.
  •  
  • 20. Aslan, M.; Tufan, M.; Küçükömeroğlu, T. Tribological and Mechanical Performance of Sisal-filled Waste Carbon and Glass Fibre Hybrid Composites. Composites Part B 2018, 140, 241-249.
  •  
  • 21. Kalaprasad, G.; Francis, B.; Thomas, S.; Kumar, C. R.; Pavithran, C.; Groeninckx, G.; Thomas, S. Effect of Fibre Length and Chemical Modifications on the Tensile Properties of Intimately Mixed Short Sisal/Glass Hybrid Fibre Reinforced Low Density Polyethylene Composites. Polym. Int. 2004, 53, 1624-1638.
  •  
  • 22. Ramesh, M.; Palanikumar, K.; Reddy, K. H. Evaluation of Mechanical and Interfacial Properties of Sisal/Jute/Glass Hybrid Fiber Reinforced Polymer Composites. Trans. Indian Inst. Met. 2016, 69, 1851-1859.
  •  
  • 23. Cihan, M.; Sobey, A.; Blake, J. Mechanical and Dynamic Performance of Woven Flax/E-glass Hybrid Composites. Compos. Sci. Technol. 2019, 172, 36-42.
  •  
  • 24. Ahmed, K. S.; Vijayarangan, S. Tensile, Flexural and Interlaminar Shear Properties of Woven Jute and Jute-glass Fabric Reinforced Polyester Composites. J. Mater. Process. Technol. 2008, 207, 330-335.
  •  
  • 25. Goda, K.; Sreekala, M.; Gomes, A.; Kaji, T.; Ohgi, J. Improvement of Plant Based Natural Fibers For Toughening Green Composites-Effect of Load Application During Mercerization of Ramie Fibers. Composites Part A 2006, 37, 2213-2220.
  •  
  • 26. Roy, K.; Debnath, S. C.; Tzounis, L.; Pongwisuthiruchte, A.; Potiyaraj, P. Effect of Various Surface Treatments on the Performance of Jute Fibers Filled Natural Rubber (NR) Composites. Polym. 2020, 12, 369.
  •  
  • 27. Khalid, M. Y.; Al Rashid, A.; Sheikh, M. F. Effect of Anodizing Process on Inter Laminar Shear Strength of GLARE Composite through T-Peel Test: Experimental and Numerical Approach. Exp. Tech. 2021, 45, 227-235.
  •  
  • 28. Sezgin, H.; Berkalp, O. B. The Effect of Hybridization on Significant Characteristics of Jute/Glass and Jute/Carbon-reinforced Composites. J. Ind. Text. 2017, 47, 283-296.
  •  
  • 29. Yahaya, R.; Sapuan, S.; Jawaid, M.; Leman, Z.; Zainudin, E. Effect of Layering Sequence and Chemical Treatment on the Mechanical Properties of Woven Kenaf-Aramid Hybrid Laminated Composites. Mater. Des. 2015, 67, 173-179.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2021; 45(3): 390-397

    Published online May 25, 2021

  • 10.7317/pk.2021.45.3.390
  • Received on Nov 28, 2020
  • Revised on Mar 8, 2021
  • Accepted on Mar 29, 2021

Correspondence to

  • Muhammad Yasir Khalid and austo Pedro García Márquez*****

  • Department of Mechanical Engineering, University of Management & Technology Lahore, Sialkot Campus, 51041, Pakistan
    *****Ingenium Research Group, University of Castilla-La Mancha, 13071 Ciudad Real, Spain

  • E-mail: yasir.khalid@skt.umt.edu.pk or yasirkhalid94@gmail.com, faustopedro.garcia@uclm.es