Article
  • Effect of Immiscible Polymer in Improving the Reflectivity and Productivity of Polymer Blending Film Containing Polyethylene Terephthalate

  • Kweon Hyung Han*, **, Woo Nyon Kim*,† , and Juyoung Kim***,†

  • *Department of Chemical and Biological Engineering, Korea University, Anam-dong, Seoul 02841, Korea
    **SKC Advanced Technology R&D, 102 Jeongjaro, Jangan-Gu, Suwon, Gyonggi 16338,
    Korea
    ***Department of Advanced Materials Engineering, Kangwon National University, Samcheok 25913, Korea

  • 폴리에틸렌 테레프탈레이트 블렌딩 필름의 반사율 및 생산성 향상에 있어서 비상용성 수지가 미치는 효과에 대한 연구

  • 한권형*, ** · 김우년*,† · 김주영***,†

  • *고려대학교 화공생명공학과, **SKC 첨단기술중앙연구소, ***강원대학교 신소재공학과

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Hecht, E. Optics; 5th ed.; Pearson Education, England, 2016.
  •  
  • 2. Nevalainen, K.; MacKerron, D. H.; Everall, N. J. The Microstructure of a Polyethylene Terephthalate Matrix Near to a Void Under Uniaxial Draw.J. Mater. Chem. Phys. 2007, 101, 103-111.
  •  
  • 3. Optical Properties of Polymers; Meeten, G. H. Ed.; Elsevier: London/New York, 1986.
  •  
  • 4. Ito, K.; Nonomura, C.; Yamashita, K.; Suzuki, T.; Chinwanitcharoen, C.; Yamada, T.; Ishihara, H. Analysis of Surface Structure with Regard to Interfacial Delamination in Polyester Films with Incompatible Polymers. J. Appl. Polym. Sci. 2004, 92, 1243-1251.
  •  
  • 5. Han, K. H.; Jang, M. G.; Juhn, K. J.; Kim, W. N. The Effects of Compatibilizers on the Morphological, Mechanical, and Optical Properties of Biaxially Oriented Poly(ethylene terephthalate)/Syndiotactic Polystyrene Blend Films. Macromol. Res. 2018,26, 254-262.
  •  
  • 6. Han, K. H.; Kim, W. N.; Kim, J. Y. Effects of Compatibilizers in Void Formation: Biaxially-Oriented Polyethylene Terephthalate/Polyphenylene Ether Blend Film. Macromol. Res. 2020, 28, 605-614.
  •  
  • 7. Ali, U.; Abd Karim, K. J. B.; Buang., N. A. A Review of the Properties and Applications of Poly(Methyl Methacrylate) (PMMA). Polym. Rev. 2015, 55, 678-705.
  •  
  • 8. El-Bashir, S. M.; AlSalhi, M. S.; Al-Faifi, F.; Alenazi, W. K. Spectral Properties of PMMA Films Doped by Perylene Dyestuffs for Photoselective Greenhouse Cladding Applications. Polymers 2019, 11, 494-504.
  •  
  • 9. Scaffaro, R.; Maio, A.; Sutera, F.; Gulino, E. F.; Morreale, M. Degradation and Recycling of Films Based on Biodegradable Polymers: A Short Review. Polymers 2019, 26, 651-671.
  •  
  • 10. Lee, J. B.; Lee, Y. K.; Choi, G. D.; Kim, W. N. Compatibilizing Effects for Improving Mechanical Properties of Biodegradable Poly(Lactic Acid) and Polycarbonate Blends. Polym. Degrad. Stab. 2011, 96, 553-560.
  •  
  • 11. Lamnawar, K.; Maazouz, A. Rheological, Morphological, and Heat Seal Properties of Linear Low Density Polyethylene and Cyclo Olefine Copolymer (LLDPE/COC) Blends. J. Appl. Polym. Sci. 2010, 116, 2015-2022.
  •  
  • 12. Kolarík, J.; Kruliš, Z.; Šlouf, M. High-density Polyethylene/Cycloolefin Copolymer Blends. Part 1: Phase Structure, Dynamic Mechanical, Tensile, and Impact Properties. Polym. Eng. Sci. 2005, 45, 817-826.
  •  
  • 13. Taglialatela, S.; Boragno, L.; Losio, S.; Limbo, S.; Castellano, M. Modulation of Barrier Properties of Monolayer Films from Blends of Polyethylene with Ethylene-co-norbornene. J. Appl. Polym. Sci. 2011, 121, 3020-3027.
  •  
  • 14. Chiu, H. T.; Chuang, C. Y. Mechanical Properties and Compatibility of Sulfonated Poly(Ethylene Terephthalate)/Cyclic Olefin Copolymer/Maleic Anhydride-Grafted Polyethylene-Octene Elastomer. Polym. Plast. Tech. Eng. 2008, 47, 649-654.
  •  
  • 15. Lopez-Manchado, M. A.; Spunar, R.; Quijada, R. Behavior of Poly(Ethylene-co-olefin) Polymers as Elastomeric Materials. J. Appl. Polym. Sci. 2004, 92, 3008-3015.
  •  
  • 16. Androsch, R. Melting and Crystallization of Poly(Ethylene-co-octene) Measured by Modulated D.S.C. and Temperature-resolved X-ray Diffraction. Polymer 1999, 40, 2805-2812 .
  •  
  • 17. Francisquetti, E. L.; Pistor, V.; Fiorio, R.; Jacobi, M. Evaluation of Mechanical Properties and Physical Interactions of a Ternary Blend of Poly(Ethylene-co-octene)/Poly(ethylene-co-vinyl acetate)/Poly(vinyl chloride) in the Molten State. J. Appl. Polym. Sci. 2013, 129, 1117-1123.
  •  
  • 18. Lee, J. G.; Kim, S. H.; Kang, H. C.; Park, S. H. Effect of TiO2 on PVDF/PMMA Composite Films Prepared by Thermal Casting. Macromol. Res. 2013, 21, 349-355.
  •  
  • 19. Lee, J. G.; Kim, S. H. Structure Development of PVDF/PMMA/TiO2 Composite Film with Casting Conditions. Macromol. Res. 2011, 19, 72-78.
  •  
  • 20. Wu, S. Polymer Interface and Adhesion; Marcel Dekker Inc.: New York, 1982.
  •  
  • 21. Modern Polyesters: Chemistry and Technology of Polyesters and Copolyesters; Scheirs, J., Long, T. E. Eds.; John Wiley & Sons Ltd.: Chichester, England, 2003.
  •  
  • 22. Jang, M. G.; Lee, Y. K.; Kim, W. N. Influence of Lactic Acid-grafted Multi-walled Carbon Nanotube (LA-g-MWCNT) on the Electrical and Rheological Properties of Polycarbonate/Poly (lactic acid)/ LA-g-MWCNT Composites. Macromol. Res. 2015, 23, 916-923.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2021; 45(3): 363-371

    Published online May 25, 2021

  • 10.7317/pk.2021.45.3.363
  • Received on Nov 8, 2020
  • Revised on Mar 1, 2021
  • Accepted on Mar 1, 2021

Correspondence to

  • Woo Nyon Kim*, and Juyoung Kim***

  • *Department of Chemical and Biological Engineering, Korea University, Anam-dong, Seoul 02841, Korea
    ***Department of Advanced Materials Engineering, Kangwon National University, Samcheok 25913, Korea

  • E-mail: kimwn@korea.ac.kr, juyoungk@kangwon.ac.kr