Article
  • Air Venting Simulation for Multiphase Flow of Polymers and Air in the Cavity of a Mold

  • Jeong Woo Woo, Sung Hyun Choi, and Min-Young Lyu*,†

  • Hankook Tire Technodome, 50, Yuseong-daero 935beon-gil, Yuseong-gu, Daejeon 34111, Korea
    *Department of Machanical System Design Engineering, Seoul National University of Science and Technology 232 Gongneungro, Nowon-gu, Seoul 01811, Korea

  • 고분자와 공기의 다상유동을 고려한 캐비티 내 공기 벤팅의 컴퓨터 모사

  • 우정우 · 최성현 · 류민영*,†

  • 한국타이어 중앙연구소, *서울과학기술대학교 기계시스템디자인공학과

References
  • 1. D. V. Rosato, D. V. Rosato, and M. G. Rosato, Injectionmolding handbook, 3rd Ed., Springer Science & Business Media, NewYork,2012.
  •  
  • 2. C. Lotti, M. M. Ueki, and R. E. S. Bretas, J.Inject. Mold. Technol., 6, 157 (2002).
  •  
  • 3. J. H. Mo, H. J. Kim, and M.-Y. Lyu, Elast.Compos., 38, 295 (2003).
  •  
  • 4. S. T. Joo, Y. H. Kim, and M.-Y. Lyu, Trans. Mater.Process., 10, 525 (2001).
  •  
  • 5. K.-H. Lim, Korean Chem. Eng. Res., 48,490 (2010).
  •  
  • 6. B.-C. Song, S.-R. Kim, Y.-G. Kang, and M.-H. Ham, J.Korean Soc. Manuf. Process Eng., 10, 117 (2011).
  •  
  • 7. J. W. Woo, K. M. Yang, and M.-Y. Lyu, Elast.Compos., 51, 263 (2016).
  •  
  • 8. C. W. Hirt and B. D. Nichols, J.Comput. Phys., 39, 201 (1981).
  •  
  • 9. S. Ghosh and H. B. Bull, Biochim. Biophys.Acta, 66, 150 (1963).
  •  
  • 10. V. Broje and A. A. Keller, J.Colloid Interface Sci., 305, 286 (2007).
  •  
  • 11. J.E. Mark, Polymer data handbook, Oxford University Press, NewYork, 1999.
  •  
  • 12. T.B. Belytschko and J. M. Kennedy, Nucl. Eng. Des., 49, 17 (1978).
  •  
  • 13. S.J. Kim, K. H. Lim, and C. Kim, Korean-Aust. Rheol. J., 18, 109(2006).
  •  
  • 14. H. K. Myong, Trans. Korean Soc. Mech. Eng. B, 33,443 (2009).
  •  
  • 15. K.-J.Lee, K.-S. Yang, and C.-W. Kang, J. Comput. Fluids Eng., 15, 99(2010).
  •  
  • 16. J.E. Kim and H. K. Myong, J. Computat. Fluids Eng., 11, 14(2006).
  •  
  • 17. W.J. Rider and D. B. Kothe, J. Comput. Phys., 141, 112(1998).
  •  
  • 18. T. E. Tezduyar, Comput. Method. Appl. Mech.Eng., 195, 2983 (2006).
  •  
  • 19. M. Sussmam, P. Smereka, and S.Osher, J. Comput. Phys., 114, 146 (1994).
  •  
  • 20. Y. C. Chang, T. Y. Hou, B. Merriman, and S. Osher, J.Comput. Phys., 124, 449 (1996).
  •  
  • 21. M. H. Cho, H.-G. Choi, and J.-Y. Yoo, Trans. KoreanSoc. Mech. Eng. B, 32, 754 (2008).
  •  
  • 22. S. J. Kim and W. R. Hwang, J. Comput. Phys.,225, 615 (2007).
  •  
  • 23. L. Zhou, D.-y. Liu, and C.-q.Ou, Eng. Appl. Comput. Fluid Mech., 5, 127 (2011).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2019; 43(6): 816-823

    Published online Nov 25, 2019

  • 10.7317/pk.2019.43.6.816
  • Received on Feb 25, 2019
  • Revised on Apr 2, 2019
  • Accepted on Apr 2, 2019

Correspondence to

  • Min-Young Lyu

  • Department of Machanical System Design Engineering, Seoul National University of Science and Technology 232 Gongneungro, Nowon-gu, Seoul 01811, Korea

  • E-mail: mylyu@seoultech.ac.kr