Article
  • Relationship between Deposition Strength and Cross-section Morphology of a Material Extrusion-type 3D Printing Manufactured Article
  • Hye Sung Yoon, Min-Young Lyu , and Sun Chul Jin*

  • Department of Mechanical System Design Engineering, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea
    *Samyang Chemical R&D Center, 730 Daedeok-daero, Yusung-gu, Daejeon 34055, Korea

  • 압출방식 3D 프린팅 적층물의 단면 형태와 적층강도와의 관계
  • 윤해성 · 류민영 · 진선철*

  • 서울과학기술대학교 기계시스템디자인공학과, *삼양사 화학연구소

References
  • 1. A. Gebhardt and J.-S. Hotter, Additive Manufacturing, Hanser, Munich, 2016.
  •  
  • 2. S. Park, Int. J. Adv. Culture Technol., 2, 30 (2014).
  •  
  • 3. T. Rayna and L. Striukova, Technol. Forecast. Soc. Change, 102, 214 (2016).
  •  
  • 4. S.-H. Park, J. H. Park, H. J. Lee, and N. K. Lee, J. Kor. Soc. Prec. Eng., 31, 1067 (2014).
  •  
  • 5. Q. Gu, J. Hao, Y. Lu, L. Wang, G. G. Wallance, and Q. Zhou, Science China, 58, 411 (2015).
  •  
  • 6. J. Lee, S. Park, and W. D. Kim, Trans. Korean Soc. Mech. Eng. C, 1, 21 (2013).
  •  
  • 7. H.-S. Kim and I.-A. Kang, J. Korea Fashion & Costume Design Assoc., 17, 125 (2015).
  •  
  • 8. S. Lee, J. Korean Acad. Pediatr. Dent., 43, 93 (2016).
  •  
  • 9. ASTM F2792-12a: Standard Terminology for Additive Manufacturing Technologies (2013).
  •  
  • 10. M. S. Hossain, D. Espalin, J. Ramos, M. Perez, and R. Wicker, J. Manuf. Sci. Eng., 136, 061002 (2014).
  •  
  • 11. V. Vega, J. Clements, T. Lam, A. Abad, B. Fritz, N. Ula, and O. S. Es-Said, J. Mater. Eng. Perform., 20, 978 (2011).
  •  
  • 12. G. D. Kim and J. Kim, Trans. Korean Soc. Machine Tool Engineers, 15, 56 (2006).
  •  
  • 13. B. V. Reddy, N. V. Reddy, and A. Ghosh, Virtual Phys. Prototyp., 2, 51 (2007).
  •  
  • 14. O. S. ES-Said, J. Foyos, R. Noorani, M. Mendelson, R. Marloth, and B. A. Pregger, Mater. Manuf. Process., 15, 107 (2000).
  •  
  • 15. S. H. Masood, K. Mau, and W. Q. Song, Mater. Sci. Forum, 654, 2556 (2010).
  •  
  • 16. P. Anhua, Adv. Mater. Res., 538, 1564 (2012).
  •  
  • 17. T.-M. Wang, J.-T. Xi, and Y. Jin, Int. J. Adv. Manuf. Tech., 33, 1087 (2007).
  •  
  • 18. B. N. Turner, R. Strong, and S. A. Gold, Rapid Prototyp. J., 20, 192 (2014).
  •  
  • 19. A. Bellini, PhD Thesis, Drexel University, 2002.
  •  
  • 20. M. Roxas, PhD Thesis, University of Toronto, 2008.
  •  
  • 21. J. H. Park, M.-Y. Lyu, S. Y. Kwon, H. J. Noh, M. S. Koo, and S. H. Cho, Elast. Compos., 51, 301 (2016).
  •  
  • 22. S. Kim and M.-Y. Lyu, Elast. Compos., 52, 216 (2017).
  •  
  • 23. Q. Sun, G. M. Rizvi, C. T. Bellehumeur, and P. Gu, Rapid Prototyp. J., 14, 72 (2008).
  •  
  • 24. S.-H. Ahn, M. Montero, D. Odell, S. Roundy, and P. K. Wright, Rapid Prototyp. J., 8, 248 (2002).
  •  
  • 25. S. J. Park, J. H. Park, K. H. Lee, and M.-Y. Lyu, Polym. Korea, 40, 846 (2016).
  •  
  • 26. C. C. Chen and J. L. White, Polym. Eng. Sci., 33, 923 (1993).
  •  
  • 27. S. Wu, Polym. Eng. Sci., 30, 753 (1990).
  •  
  • 28. R. Dell’Erba, G. Groeninckx, G. Maglio, M. Malinconico, and A. Migliozzi, Polymer, 42, 7831 (2001).
  •  
  • 29. J. Datta and M. Wloch, Macromol. Res., 23, 1117 (2015).
  •  
  • 30. F. Sen, S. Madakbas, E. Basturk, and M. V. Kahraman, Polym. Korea, 41, 1019 (2017).
  •  
  • 31. S. J. Park, J. E. Lee, J. H. Park, M.-Y. Lyu, K. Park, M. S. Koo, S. C. Jin, K. Y. Kim, and S. Yong, Elast. Compos., 52, 99 (2017).
  •  
  • 32. S. J. Park, J. H. Park, M.-Y. Lyu, M. S. Koo, H. J. Rho, and S. H. Cho, Polym. Korea, 41, 531 (2017).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2018; 42(5): 752-762

    Published online Sep 25, 2018

  • 10.7317/pk.2018.42.5.752
  • Received on Feb 3, 2018
  • Revised on Mar 24, 2018
  • Accepted on Mar 25, 2018

Correspondence to

  • Min-Young Lyu
  • Department of Mechanical System Design Engineering, Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea

  • E-mail: mylyu@seoultech.ac.kr