Article
  • Characteristics of the Blends of Metallocene Catalyzed Polymer and Polyethylene
  • Kim KS, Hong SK
  • 메탈로센 수지와 폴리에틸렌 블렌드의 물리적 특성
  • 김기섭, 홍성권
Abstract
The metallocene PE(m-PE)/HDPE and m-PE/LDPE blend systems show typical miscibleb behavior in the solid state. The yield strength and elongation decreased with the addition of m-PE, while the tensile strength at break, contrary to the yield strength, increased with the content of m-PE. The melting and crystallization behavior of the blend were dominated by HDPE. The melting temperature and the heat of fusion were linearly decreased with the m-PE content. This result shows that the metallocene PEs have a good low temperature heat-sealibility. The flow rate of blends under large load (21.6 kg) increased with the addition of m-PE, but the flow rate under small loa (2.16 kg and 5 kg) decreased with the m-PE content. The melt flow rate ratio decreased with the m-PE content while the torque value of blends increased. The results indicate that the processibility of m-PE/HDPE or LDPE decreases with m-PE content.

메탈로센 촉매로 제조된 폴리올레핀은 물성이 뛰어나 범

Keywords: metallocene; polymer blend; LDPE; HDPE

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1999; 23(4): 562-568

    Published online Jul 25, 1999

  • 10.7317/pk.
  • Received on Nov 30, -0001
  • Revised on Nov 30, -0001
  • Accepted on Nov 30, -0001

Correspondence to

  • E-mail: