Article
  • Properties of Polyurethane Elastomer. 2. The Effect of Hard Segment Structure
  • Ahn TO, Hong IP, Kim JH, Jeong HM
  • 폴리우레탄 탄성체의 구조와 물성. 2. Hard Segment 구조의 영향
  • 안태완, 홍익표, 김정호, 정한모
Abstract
Polyurethane elastomers were synthesized from poly(tetramethylene glycol) (PTMG), hexamethylene diisocyanate(HDI)/dicyclohexylmethane-4,4''-diisocyanate(H12MDI) mixture, and 1,4-butane diol by solution polymerization. The physical properties of polyurethane elastomers at various feed ratios of HDI/H12MDI and from PTMG''s of various molecular weights were studied. As the HDI/H12MDI feed ratio and molecular weight of PTMG were increased, phase segregation into two domains of hard segment and soft segment was more evidently shown from thermal properties, infra-red spectroscopy, and tensile properties.

Poly(tetramethylene glycol) (PTMG). hexamethylene diisocyanate (HDI)/dicyclohexylmethane-4,4''-diisocyanate(H12MDI) 혼합물, 그리고 1,4-butane diol을 사용하여 폴리우레탄 탄성체를 용액 중합하여, 탄성체 내의 hard segment 성분인 HDI/H12MDI feed비와 soft segment인 PTMG의 분자량의 변화에 따른 물성의 변화를 조사하였다. HDI/H12MDI feed 비 값이 클수록, PTMG의 분자량이 클수록 hard segmend와 soft segment의 상분리 정도가 큼을 열적성질, 적외선 분광분석, 강신도 거동에서 관찰할 수 있었다.

References
  • 1. Yamashiro S, Kobunshi Ronbunshu, 45, 535 (1988)
  •  
  • 2. Benson RS, Lyman DJ, J. Polym. Sci. A: Polym. Chem., 26, 1393 (1988)
  •  
  • 3. Foks J, Janik H, Polym. Eng. Sci., 29, 113 (1989)
  •  
  • 4. Godovsky YK, Bessonova NP, Mironova NN, Colloid Polym. Sci., 267, 414 (1989)
  •  
  • 5. Russell DUrethane Technology, June/July, 19 (1989)
  •  
  • 6. Bengtson B, Feger C, MacKnight WJ, Schneider NS, Polymer, 26, 895 (1985)
  •  
  • 7. Nierzwicki W, Rutkowska M, Polym. Commun., 27, 327 (1986)
  •  
  • 8. Ahn TO, Lee SY, Lee SW, Jeong HM, Polym.(Korea), 14(5), 497 (1990)
  •  
  • 9. Chan WC, Chen SA, Polymer, 29, 1995 (1988)
  •  
  • 10. Patel P, Patel M, Suthar BP, Angew. Makromol. Chem., 156, 29 (1988)
  •  
  • 11. Knaub P, Camberlin Y, J. Appl. Polym. Sci., 32, 5627 (1986)
  •  
  • 12. Pandya MV, Deshpande DD, Hundiwale DG, J. Appl. Polym. Sci., 32, 4959 (1986)
  •  
  • 13. vanBogart JWC, Bluemke DA, Cooper SL, Polymer, 22, 1428 (1981)
  •  
  • 14. Cunliffe AV, Davis A, Farey M, Wright J, Polymer, 26, 301 (1985)
  •  
  • 15. Takahara A, Tashita J, Kajiyama T, Takayanagi M, MacKnight WJ, Polymer, 26, 987 (1985)
  •  
  • 16. Koberstein JT, Russell TP, Macromolecules, 19, 714 (1986)
  •  
  • 17. PaikSung CS, Hu CB, Wu CS, Macromolecules, 13, 111 (1980)
  •  
  • 18. Wang CB, Cooper SL, Macromolecules, 16, 775 (1983)
  •  
  • 19. McLennaghan AW, Pethrick RA, Eur. Polym. J., 24, 1063 (1988)
  •  
  • 20. Brunette CM, Hsu SL, MacKnight WJ, Macromolecules, 15, 71 (1982)
  •  
  • 21. Koberstein JT, Gancarz I, Clarke TC, J. Polym. Sci. B: Polym. Phys., 24, 2487 (1986)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1990; 14(6): 608-614

    Published online Dec 25, 1990