Article
  • Physical Properties of Polyolefin Filled with Microencapsulated CaCO3
  • Im SS, Kim DK, Jung DY
  • 마이크로 캡슐화된 탄산칼슘을 충전한 Polyolefin의 물리적 성질
  • 임승순, 김동국, 정덕영
Abstract
CaCo3 for inorganic filler/polymer composites were prepared by phase separation method using organic solvent to improve the adhesion of interface and the dispersion of fillers. The CaCo3 was treated with wall materials, HDPE and LONPLY, in order to encapsulate it. Each formation percentage according to encapsulation ratio was evaluated by thermal analysis. And the physical properties and dynamic mechanical property of HDPE and PP filled with microencapsulated CaCo3 were measured bu Instron and Rheovibron and, especially we assured that the decrease of tensile strength can be minimized by encapsulated method in HDPE and PP filled CaCo3.

탄산칼슘을 충전시킨 무기물 복합재료를 제조하는데 있어서 충전재의 계면 친화성과 분산성을 향상시키기 위해 유기용매계로 부터의 상분리법(Coacervation)을 이용하였다. 탄산칼슘의 마이크로 캡슐화는 벼막고분자로 HDPE와 LONPLY를 사용하여 표면처리를 하였으며, 각 조성비에 따른 캡슐화 비율을 열분석을 통해 조사하였다. 또 캡슐화된 탄산칼슘을 polyolefin계의 HDPE와 PP에 충전시켜, 기계적 및 동역학적 특성의 결과로 각각의 표면처리효과에 대하여 연구하고, 특히 인장강도에 있어서 탄산칼슘의 충전으로 인한 물성저하를 최소화 할 수 있음을 확인하였다.

References
  • 1. Seo IS, Im SS, Huh YW, Polym.(Korea), 12(7), 652 (1988)
  •  
  • 2. Encyclopedia of Polymer Science and Engineering, 2nd ed., 9, 724 (1985)
  •  
  • 3. Faris BD, J. Appl. Polym. Sci., 28, 3568 (1983)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1990; 14(5): 463-472

    Published online Oct 25, 1990