Article
  • Effect of Fluorination of Hydrogels Containing CNTs on Controlled Drug Reactivity
  • Kim JH, Bae TS, Lee YS
  • 약물반응 조절에 미치는 탄소나노튜브가 첨가된 하이드로젤의 불소화 영향
  • 김지현, 배태성, 이영석
Abstract
Hydrogels containing carbon nanotubes (CNTs) were fluorinated with hydrophobic functional groups to control the drug releasing rate. Vitamin D3, a fat-soluble material, was used as the model drug to investigate the drug deliver rate. The hydrogel containing CNTs was fluorinated well due to the CNTs, and fluorinated hydrogels had 1.6 times greater reactivity than those of the hydrogels lacking CNTs. The fluorination of hydrogels containing vitamin D3 substantially increased the effect of drug releasing efficiency. Additionally, the increased fluorine contents of hydrogels containing CNTs had affected on controlling the initial drug releasing rate. The drug releasing efficiency was remarkably increased by more fluorination due to the reactivity of vitamin D3 with fluorinated hydrogel surface.

탄소나노튜브(carbon nanotubes, CNTs)가 첨가된 하이드로젤의 약물방출속도를 용이하게 조절하기 위하여 소수성 관능기를 가지는 불소화 처리를 실시하였다. 이때 약물방출속도를 조사하기 위한 모델 약물로서 지용성물질인 비타민 D3를 사용하였다. 하이드로젤의 불소화 반응이 CNT 첨가로 인하여 훨씬 용이하였으며, 이는 CNTs가 첨가되지 않은 하이드로젤과 비교하여 반응성이 1.6배 높았다. 비타민 D3가 첨가된 하이드로젤의 불소화 반응은 약물방출조절 효과를 크게 증가시켰다. 또한 CNTs가 첨가된 하이드로젤 표면에 증가된 불소함량은 초기약물방출속도의 조절에 영향을 주었다. 하이드로젤 표면 불소화가 증가할수록 비타민 D3와의 표면 반응으로 인하여 약물방출효율이 크게 증가하였다.

Keywords: hydrogels; CNTs; fluorination; functional groups; vitamin D3; drug releasing rate

References
  • 1. Hamidi M, Azadi A, Rafiei P, Adv. Drug Deliv. Rev., 60, 1638 (2008)
  •  
  • 2. Anselmo AC, Mitragotri S, J. Control. Release, 190, 15 (2014)
  •  
  • 3. Kumari A, Yadav SK, Yadav SC, Colloids Surf. B: Biointerfaces, 75, 1 (2010)
  •  
  • 4. Jiang S, Liu S, Feng W, J. Mech. Behav. Biomed. Mater., 4, 1228 (2011)
  •  
  • 5. Garcia-Gonzalez CA, Uy JJ, Alnaief M, Smirnov I, Carbohydr. Polym., 88, 1378 (2012)
  •  
  • 6. Hwang JS, Yuk KY, Huh KM, J. Tissue Eng. Regen. Med., 5, 147 (2008)
  •  
  • 7. Constantin M, Bucatariu S, Harabagiu V, Popescu I, Ascenzi P, Fundueanu G, Eur. J. Pharm. Sci., 62, 86 (2014)
  •  
  • 8. Josef E, Bianco-Peled H, Int. J. Pharm., 458, 208 (2013)
  •  
  • 9. Peppas NA, Bures P, Leobandung W, Ichikawa H, Eur. J. Pharm. Biopharm., 50, 27 (2000)
  •  
  • 10. Ashara KC, Paun JS, Soniwala MM, Chavada JR, Mori NM, Asian Pac. J. Trop. Dis., 4, S27 (2014)
  •  
  • 11. Im JS, Lee SK, Bai BC, Lee YS, J. Ind. Eng. Chem., 18(1), 325 (2012)
  •  
  • 12. Bertz A, Wohl-Bruhn S, Miethe S, Tiersch B, Koetz J, Hust M, Bunjes H, Menzel H, J. Biotechnol., 163, 243 (2013)
  •  
  • 13. Ganesh M, Hemalatha P, Mei PM, Rajasekar K, Jang HT, J. Ind. Eng. Chem., 18(2), 684 (2012)
  •  
  • 14. Rub MA, Azum N, Kumar D, Khan F, Asiri AM, J. Ind. Eng. Chem., 21(-), 1119 (2015)
  •  
  • 15. Zou X, Zhao X, Ye L, Wang Q, Li H, J. Ind. Eng. Chem., 21(-), 1389 (2015)
  •  
  • 16. Pourjavadi A, Tehrani ZM, Jokar S, J. Ind. Eng. Chem., 28, 45 (2015)
  •  
  • 17. Samart C, Prawingwong P, Amnuaypanich S, Zhang H, Kajiyoshi K, Reubroycharoen P, J. Ind. Eng. Chem., 20, 2153 (2015)
  •  
  • 18. Gao X, Chen L, Xie J, Yin Y, Chang T, Duan Y, Jiang N, Mater. Sci. Eng. C-Biomimetic Supramol. Syst., 39, 56 (2014)
  •  
  • 19. Shin SR, Bae H, Cha JM, Mun JY, Chen YC, Tekin H, Shin H, Farshchi S, Dokmeci MR, Tang S, Khademhosseini A, ACS Nano, 6, 362 (2012)
  •  
  • 20. Chen YS, Tsou PC, Lo JM, Tsai HC, Wang YZ, Hsiue GH, Biomaterials, 34, 7328 (2013)
  •  
  • 21. Nandakumar A, Birgani ZT, Santos D, Mentink A, Auffermann N, van derWerf K, Bennink M, Moroni L, van Blitterswijk C, Habibovic P, Biofabrication, 5, 015006 (2013)
  •  
  • 22. An Z, Liu C, Chen X, Zheng F, Zhang Y, J. Phys. D-Appl. Phys., 45, 035302 (2012)
  •  
  • 23. Hiramatsu M, Hori M, Materials, 3, 1559 (2010)
  •  
  • 24. Im JS, Yun J, Lim YM, Kim HI, Lee YS, Acta Biomater., 6, 102 (2010)
  •  
  • 25. Horvat G, Gyarmati B, Berko S, Szabo-Revesz P, Szilagyi BA, Szilagyi A, Soos J, Sandri G, Bonferoni MC, Rossi S, Ferrari F, Caramella C, Csanyi E, Budai-Szucs M, Eur. J. Pharm. Sci., 67, 1 (2015)
  •  
  • 26. Pandey PK, Smitha P, Gajbhiye NS, J. Polym. Res., 15, 397 (2008)
  •  
  • 27. Sankar RM, Meera KMS, Samanta D, Murali A, Jithendra P, Mandal AB, Jaisankar SN, RSC Advances, 2, 12424 (2012)
  •  
  • 28. Yudianti R, Onggo H, Surirman, Saito Y, Iwata T, Azuma J, Open Mater. Sci. J., 5, 242 (2011)
  •  
  • 29. Arndt KF, Richter A, Ludwig S, Zimmermann J, Kressler J, Kuckling D, Adler HJ, Acta Polym., 50, 383 (1999)
  •  
  • 30. El-Mohdy HLA, Mostafa TB, J. Macromol. Sci.-Pure Appl. Chem., 50, 6 (2013)
  •  
  • 31. Lee YS, Lee BK, Rho JS, Korean J. Chem. Eng., 20(1), 151 (2003)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2015; 39(6): 925-933

    Published online Nov 25, 2015

  • 10.7317/pk.2015.39.6.925
  • Received on Jun 17, 2015
  • Accepted on Jun 30, 2015