Article
  • Encapsulation of Carbendazim with Epoxidized Natural Rubber/Sodium Alginate
  • Riyajan SA, Tangboriboonrat P
  • 에폭시기를 가진 천연고무와 Sodium Alginate를 이용한 Carbendazim의 인캡슐레이션
Abstract
This work aimed to study the properties of epoxidized natural rubber (ENR) having 19% mole epoxidation crosslinked with glutaraldehyde (GA) and its application in encapsulation of carbendazim (CAD). The swelling ratio in toluene and the elongation at break of cured ENR decreased with increasing dipping time in GA and the GA concentration. The weight loss of the sample after being buried in soil indicated its biodegradability. The blend of cured ENR with sodium alginate (NaAlg) which was then crosslinked by Ca2+ or GA/Ca2+ was sucessfully used for encapsulation of CAD. Results showed that the release rate of CAD was controlled by GA/Ca2+ and ENR/NaAlg ratios.

Keywords: natural rubber; epoxidized natural rubber; glutaraldehyde; encapsulation

References
  • 1. Riyajan SA, Chaiponban S, Tanbumrung K, Chem. Eng. J., 153(1-3), 199 (2009)
  •  
  • 2. Kim SM, Kim KJ, Polym.(Korea), 38(3), 406 (2014)
  •  
  • 3. Nakason C, Worlee A, Salaeh S, Polym.(Korea), 27, 858 (2008)
  •  
  • 4. Rajasekar R, Pal K, Heinrich G, Das A, Das CK, Mater. Des., 30, 3839 (2009)
  •  
  • 5. Nakason C, Worlee A, Salaeh S, Polym.(Korea), 27, 858 (2008)
  •  
  • 6. Nakason C, Wannavilai P, Kaesaman A, Polym.(Korea), 25, 34 (2006)
  •  
  • 7. Okwu UN, Okieimen FE, Eur. Polym. J., 35, 1855 (1999)
  •  
  • 8. Pire M, Norvez S, Iliopoulos I, Le Rossignol B, Leibler L, Polymer, 52(23), 5243 (2011)
  •  
  • 9. Nguyen TH, Tangboriboonrat P, Rattanasom N, Petchsuk A, Opaprakasit M, Thammawong C, Opaprakasit P, J. Appl. Polym. Sci., 124(1), 164 (2012)
  •  
  • 10. Riyajan S, KGK - Kaut. Gummi Kunst., 65, 51 (2012)
  •  
  • 11. Pire M, Norvez S, Iliopoulos I, Le Rossignol B, Leibler L, Polymer, 51(25), 5903 (2010)
  •  
  • 12. Riyajan S, Sakdakdapiphanich J, Polym. Int., 59, 1130 (2010)
  •  
  • 13. Riyajan SA, Sakdapipanich JT, Polym. Bull., 63(4), 609 (2009)
  •  
  • 14. Bigi A, Cojazzi G, Panzavolta S, Rubini K, Roveri N, Biomaterials, 22, 763 (2001)
  •  
  • 15. Martucci JF, Ruseckaite RA, Vazquez A, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 435, 681 (2006)
  •  
  • 16. Zhang L, Yu P, Luo YB, Sep. Purif. Technol., 52(1), 77 (2006)
  •  
  • 17. Zhang L, Yu P, Luo YB, J. Membr. Sci., 306(1-2), 93 (2007)
  •  
  • 18. Wilson LD, Pratt DY, Kozinski JA, J. Colloid Interface Sci., 393(-), 271 (2013)
  •  
  • 19. Maji TK, Baruah I, Dube S, Hussain MR, Bioresour. Technol., 98(4), 840 (2007)
  •  
  • 20. Ahmad AL, Yusuf NM, Ooi BS, Desalination, 287(-), 35 (2012)
  •  
  • 21. Lee J, Garza M, Wong H, Reimer D, Redelmeier T, Camden JB, Weitman SD, J. Pharm. Biomed., 28, 65 (2002)
  •  
  • 22. Riyajan S, Khiatdet W, Leejarkpai T, J. Polym. Mater., 31, 145 (2014)
  •  
  • 23. Na HY, Yeom HY, Yoon BC, Lee SJ, Polym.(Korea), 38(2), 171 (2014)
  •  
  • 24. Park JY, Ryu SW, Polym.(Korea), 38(1), 80 (2014)
  •  
  • 25. Hashim AS, Kohjiya S, Polym. Gels Network., 2, 219 (1994)
  •  
  • 26. Distantina S, Rochmadi S, Fahrurrozi M, Wiratni M, Preparation of hydrogel based on glutaraldehyde-crosslinked carrageenan, Proceeding of 3rd International Conference on Chemistry and Chemical Engineering, IPCBEE, IACSIT Press, Singapore, Vol 38 (2012).
  •  
  • 27. Teli SB, Gokavi GS, Sairam M, Aminabhavi TM, Sep. Purif. Technol., 54(2), 178 (2007)
  •  
  • 28. Bhatt R, Shah D, Patel KC, Trivedi U, Bioresour. Technol., 99(11), 4615 (2008)
  •  
  • 29. Jendrossek D, Tomasi G, Kroppenstedt RM, Fems Microbiol. Lett, 150, 179 (1997)
  •  
  • 30. Yew GH, Yusof AMM, Ishak ZAM, Ishiaku US, Polym. Degrad. Stabil., 90, 488 (2005)
  •  
  • 31. Stoytcheva M, Editor, Pesticides in the Modern World - Pesticides Use and Manaement, InTech, Croatia, pp 233-258 (2011).
  •  
  • 32. Jaiswal D, Bhattacharya A, Yadav IK, Singh HP, Chandra D, Jain DA, Int. J. Pharm. Pharm. Sci., 1, 128 (2009)
  •  
  • 33. Kottegoda N, Munaweera I, Madusanka N, Karunaratne V, Res. Commun., 101, 73 (2011)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2015; 39(4): 550-558

    Published online Jul 25, 2015

  • 10.7317/pk.2015.39.4.550
  • Received on Nov 4, 2014
  • Accepted on Mar 2, 2015