Article
  • Preparation and Characterization of Zaltoprofen-Loaded Polyoxalate Microspheres for Control Release
  • Kim KH, Lee CJ, Jo SA, Lee JH, Jang JE, Lee D, Kwon SY, Chung JW, Khang G
  • 방출제어를 위한 잘토프로펜이 함유된 폴리옥살레이트 미립구의 제조와 특성
  • 김경희, 이천중, 조선아, 이정환, 장지은, 이동원, 권순용, 정진화, 강길선
Abstract
Zaltoprofen loaded polyoxalate (POX) microspheres were prepared by an emulsion solvent-evaporation/extraction method like oil-in-water (O/W) for sustained release of zaltoprofen. The influence of several preparation parameters such as fabrication temperature, stirring speed, intensity of the sonication, initial drug ratio, molecular weight (Mw) of POX, concentration of POX and concentration of emulsifier has been investigated on the zaltoprofen release profiles. Physicochemical properties and morphology of zaltoprofen loaded POX microspheres were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimeter (DSC) and Fourier transform infrared (FTIR). Through the analyzed results, it was demonstrated that the characteristics of the microspheres greatly affected by the prepared condition. The releases behavior of zaltoprofen was investigated for 10 days in vitro. It was confirmed that the release behavior of zaltoprofen can be controlled by the manufacturing factor of solvent-evaporation/extraction method.

서방성방출을 위해 잘토프로펜을 함유한 미립구를 oil-in-water(O/W) 에멀젼용매 증발법을 이용하여 제조하였다. 제조온도, 교반속도, 초음파분쇄기의 강도, 약물농도, POX의 분자량과 농도, 유화제 농도 등의 제조조건에 따른 잘토프로펜의 방출거동을 평가하였다. 잘토프로펜을 함유한 POX 미립구의 물리화학적 성질 및 형태를 X선 회절분석법(XRD)과 시차주사열량계(DSC), 적외선 분광분석기(FTIR), 주사현미경(SEM)을 통해 연구하였다. 이러한 연구 결과로부터 제조조건들에 따른 미립구의 특성을 확인할 수 있었다. 또한 POX 미립구의 분해성을 10일 동안 in vitro 실험을 통해 조사하였다. 본 연구를 통해 잘토프로펜을 함유한 POX 미립구를 최적화된 용매증발방법으로 제조하였고, 이 미립구로부터 약물의 방출제어를 확인할 수 있었다.

Keywords: zaltoprofen; O/W method; polyoxalate (POX); microspheres; solvent-evaporation/extraction method.

References
  • 1. Tang HB, Inoue A, Oshita K, Hirate K, Nakata Y, Neuropharmacology., 48, 1035 (2005)
  •  
  • 2. Wang HN, Ji JB, Zeng S, J. Chromatogr. B., 879, 2430 (2011)
  •  
  • 3. Berkland C, King M, Cox A, Kim K, Pack DW, J.Control. Release., 82, 137 (2002)
  •  
  • 4. Manoharan C, Singh J, Pharm. Res.-Dordr., 30, 627 (2013)
  •  
  • 5. Balmayor ER, Tuzlakoglu K, Marques AP, Azevedo HS, Reis RL, J. Mater. Sci.-Mater. M., 19, 1617 (2008)
  •  
  • 6. Beck-Broichsitter M, Kleimann P, Gessler T, Seeger W, Kissel T, Schmehl T, Int. J. Pharm., 422, 398 (2012)
  •  
  • 7. Bao TQ, Hiep NT, Kim YH, Yang HM, Lee BT, J. Mater. Sci., 46(8), 2510 (2011)
  •  
  • 8. Wei Q, Wei W, Tian R, Wang LY, Su ZG, Ma GH, J. Colloid Interface Sci., 323(2), 267 (2008)
  •  
  • 9. Woo Y, Na K, Inter. J. Tissue. Reg., 3, 63 (2012)
  •  
  • 10. Choi HS, Kim SW, Yun DI, Khang G, Rhee JM, Kim YS, Lee HB, Polym.(Korea), 25(3), 334 (2001)
  •  
  • 11. Siepmann J, Gopferich A, Adv. Drug Deliver. Rev., 48, 229 (2001)
  •  
  • 12. Kim MS, Park SJ, Gu BK, Khang G, Kim CH, Inter. J. Tissue. Reg., 2, 125 (2011)
  •  
  • 13. Kim S, Seong K, Kim O, Kim S, Seo H, Lee M, Khang G, Lee D, Biomacromolecules, 11(3), 555 (2010)
  •  
  • 14. Lee E, Kim S, Seong K, Park H, Seo H, Khang G, Lee D, J. Biomat. Sci.-Polym. E., 22, 1683 (2011)
  •  
  • 15. Park H, Kim S, Kim S, Song Y, Seung K, Hong D, Khang G, Lee D, Biomacromolecules, 11(8), 2103 (2010)
  •  
  • 16. Lee D, Khaja S, Velasquez-Castano JC, Dasari M, Sun C, Petros J, Taylor WR, Murthy N, Nat. Mater., 6(10), 765 (2007)
  •  
  • 17. Yoo DH, Guk KH, Kim HM, Khang G, Wu D, Lee D, Int. J. Pharm., 450, 87 (2013)
  •  
  • 18. Eom S, Yoo SC, Kim YK, Lee YH, Lee EY, Yu H, Lee D, Khang G, Polym.(Korea), 34(4), 333 (2010)
  •  
  • 19. Di Martino P, Censi R, Barthelemy C, Gobetto R, Joiris E, Masic A, Odou P, Martelli S, Int. J. Pharm., 342, 137 (2007)
  •  
  • 20. Henderson EJ, Hessel CM, Veinot JGC, J. Am. Chem. Soc., 130(11), 3624 (2008)
  •  
  • 21. Lee TH, Wang JJ, Wang CH, J. Control. Release., 83, 437 (2002)
  •  
  • 22. Nii T, Ishii F, Int. J. Pharm., 298, 198 (2005)
  •  
  • 23. Park JS, Oh JS, Oh JM, Kim YT, Lee JH, Mo JH, Lee HB, Khang G, Polym.(Korea), 32(3), 193 (2008)
  •  
  • 24. Li M, Rouaud O, Poncelet D, Int. J. Pharm., 363, 26 (2008)
  •  
  • 25. Wischke C, Schwendeman SP, Int. J. Pharm., 364, 298 (2008)
  •  
  • 26. Park HJ, Hong HK, Song YS, Hong MS, Seo HS, Hong DH, Lee D, Khang G, Polym.(Korea), 34(4), 300 (2010)
  •  
  • 27. Zolnik BS, Burgess DJ, J. Control. Release., 122, 338 (2007)
  •  
  • 28. Lee JS, An TK, Shin PK, Chae GS, Jeong JK, Lee B, Cho SH, Khang G, Lee HB, Polym.(Korea), 27(3), 217 (2003)
  •  
  • 29. Ko JT, Lee JH, Lee CR, Shin HS, Yuk SH, Kim MS, Khang G, Rhee JM, Lee HB, Polym.(Korea), 29(6), 543 (2005)
  •  
  • 30. Yang YT, Wei XZ, Sun P, Wan JM, Molecules., 15, 2872 (2010)
  •  
  • 31. Khang G, Lee JH, Lee JW, Cho JC, Lee HB, Korea Polym. J., 8(2), 80 (2000)
  •  
  • 32. Eom S, Yoo SC, Song BJ, Kim YK, Park HJ, Seong KY, Song YS, Lee D, Khang G, Inter. J. Tissue. Reg., 1, 28 (2010)
  •  
  • 33. Yeo Y, Baek NJ, Park KN, Biotechnol. Bioprocess Eng., 6, 213 (2001)
  •  
  • 34. Mao SR, Xu J, Cai CF, Germershaus O, Schaper A, Kissel T, Int. J. Pharm., 334, 137 (2007)
  •  
  • 35. Wang XY, Xu H, Zhao YQ, Wang SN, Abe H, Naito M, Liu YL, Wang GQ, Mater. Sci. Eng. B-Adv., 177, 367 (2012)
  •  
  • 36. Janoria KG, Mitra AK, Int. J. Pharm., 338, 133 (2007)
  •  
  • 37. Ito F, Fujimori H, Makino K, Colloid Surface B., 54, 173 (2007)
  •  
  • 38. Besheer A, Vogel J, Glanz D, Kressler J, Groth T, Mader K, Mol. Pharmaceut., 6, 407 (2009)
  •  
  • 39. Dailey LA, Kleemann E, Wittmar M, Gessler T, Schmehl T, Roberts C, Seeger W, Kissel T, Pharm. Res., 20, 2011 (2003)
  •  
  • 40. Yang YY, Chung TS, Ng NP, Biomaterials., 22, 231 (2000)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2013; 37(6): 702-710

    Published online Nov 25, 2013

  • Received on May 23, 2013
  • Accepted on Jul 10, 2013