Article
  • Influence of TiO2 Nanoparticle Filler on the Properties of PET and PLA Nanocomposites
  • Farhoodi M, Dadashi S, Mousavi SMA, Sotudeh-Gharebagh R, Emam-Djomeh Z, Oromiehie A, Hemmati F
  • 이산화티탄 나노입자 필러가 PET와 PLA 나노복합체의 특성에 미치는 영향
  • Farhoodi M, Dadashi S, Mousavi SMA, Sotudeh-Gharebagh R, Emam-Djomeh Z, Oromiehie A, Hemmati F
Abstract
Two types of polymers were tested in this study; poly(ethylene terephthalate) (PET) as a synthetic example and poly(lactic acid) (PLA) as a natural polymer. DSC analyses showed that the use of nanofiller increased the degree of crystallinity (Xc) of both PET and PLA polymers, but the effect was more noticeable on PET nanocomposites. The crystallization of PLA and PET nanocomposites occurred at higher temperatures in comparison to neat polymers. According to dynamic mechanical-thermal analysis (DMTA), the damping factor of PET/TiO2 nanoparticles decreased compared to the neat matrix, but for PLA nanocomposites the opposite trend was observed. Results of the mechanical test showed that for both PET and PLA nanocomposites, the most successful toughening effect was observed at 3 wt% loading of TiO2 nanoparticles. SEM micrographs revealed uniform distribution of TiO2 nanoparticles at 1 and 3 wt% loading levels. The results of WAXD spectra explained that the polymorphs of PLA and PET was not affected by TiO2 nanoparticles. UV-visible spectra showed that TiO2 nanocomposite films had high ultraviolet shielding compared to neat polymer, but there was significant reduction in transparency.

Keywords: nanocomposites; poly(lactic acid); poly(ethylene terephthalate); crystallization; mechanical properties.

References
  • 1. Yu L, Dean K, Li L, Progr. Polym. Sci., 31, 576 (2006)
  •  
  • 2. Yu L, Chen L, Polymeric materials from renewable resources. Biodegradable polymer blends and composites from renewable resources, John Wiley & Sons Inc., 1 (2009)
  •  
  • 3. Lunt J, Polym. Degrad. Stabil., 59, 145 (1998)
  •  
  • 4. Singh RP, Pandey JK, Rutot D, Degee P, Dubois P, Carbohyd. Res., 338, 1759 (2003)
  •  
  • 5. Rosoff M, Nano-surface Chemistry, Marcel Dekker Inc., New York (2002)
  •  
  • 6. Saujanya C, Radhakrishnan S, Polymer, 42(16), 6723 (2001)
  •  
  • 7. Solomon DH, Hawthorne DG, Chemistry of Pigments and Fillers, John Wiley & Sons Inc., New York (1983)
  •  
  • 8. Yamada T, Hao L, Tada K, Konagaya S, Li G, Mater. Sci., 2, 154 (2006)
  •  
  • 9. Todorov LV, Martins CI, Viana JC, Solid State Phenomena., 151, 113 (2009)
  •  
  • 10. Todorov LV, Viana JC, J. Appl. Polym. Sci., 106(3), 1659 (2007)
  •  
  • 11. Li YH, Chen CH, Li J, Sun XS, Polymer, 52(11), 2367 (2011)
  •  
  • 12. Xili L, Xiuqian L, Zhijie S, Yufeng Z, Eur. Polym. J., 44, 2476 (2008)
  •  
  • 13. Nakayama N, Hayashi T, Polym. Degrad. Stabil., 92, 1255 (2007)
  •  
  • 14. Rhim JW, Hong SI, Ha CS, Tensile, LWT- Food Science and Technology., 42, 612 (2009)
  •  
  • 15. Fisher EW, Sterzel HJ, Wegner G, Kolloid-Zeitschrift and Zeitschrift Fur Polymere., 251, 980 (1973)
  •  
  • 16. Sun YY, Zhang ZQ, Moon KS, Wong CP, J. Appl.Polym. Sci., 42, 3849 (2004)
  •  
  • 17. Zhang YC, Huang JN, Wu HY, Qiu YP, Mater. Sci., 613, 316 (2009)
  •  
  • 18. Qu MH, Wang YZ, Wang C, Ge XG, Wang DY, Zhou Q, Eur. Polym. J., 41, 2569 (2005)
  •  
  • 19. He JP, Li HM, Wang XY, Gao Y, Eur. Polym. J., 42, 1128 (2006)
  •  
  • 20. Wan T, Chen L, Chua YC, Lu XH, J. Appl. Polym. Sci., 94(4), 1381 (2004)
  •  
  • 21. Liao X, Nawaby AV, Naguib HE, J. Appl. Polym. Sci., 124(1), 585 (2012)
  •  
  • 22. Pattanawanidchai S, Saeoui P, Sirisinha C, J. Appl. Polym. Sci., 96(6), 2218 (2005)
  •  
  • 23. Chiang PC, Whang WT, Tsai MH, Wu SC, Thin Solid Films, 447(-), 359 (2004)
  •  
  • 24. Tsai MH, Liu SJ, Chiang PC, Thin Solid Films, 515(3), 1126 (2006)
  •  
  • 25. Mergler YJ, Schaake RP, J. Appl. Polym. Sci., 92(4), 2689 (2004)
  •  
  • 26. Sun L, Gibson RF, Godaninejad F, Suhr J, Compos. Sci.Technol., 69, 2392 (2009)
  •  
  • 27. Espejo C, Arribas A, Monzo F, Diez PP, J. Plast. Film Sheet.DOI: 10.1177/8756087912439058 (2012)
  •  
  • 28. Sunay MS, Pekcan O, Ugur S, J. Nanomater.DOI:10.1155/2012/524343 (2012)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2012; 36(6): 745-755

    Published online Nov 25, 2012

  • Received on May 30, 2012
  • Accepted on Aug 16, 2012