Article
  • Preparation and Characteristics of Partially Fluorinated-Sulfonated Poly(biphenylene-co-sulfone)ether Membranes for Polymer Electrolyte Membrane Fuel Cell
  • Park JW, Chang BJ, Kim JH, Lee Y
  • 고분자전해질 연료전지용 부분 불소계 설폰화 Poly(biphenylene-co-sulfone)ether 막의 제조와 특성
  • 박재완, 장봉준, 김정훈, 이용택
Abstract
A series of partially fluorinated, sulfonated poly(biphenylene-co-sulfone)ether containing perfluorocyclobutane(PFCB) groups were prepared for fuel cell applications through three synthetic steps: synthesis of trifluorovinylether-terminated monomers, thermal cycloaddition and post-sulfonation. Two kinds of trifluorovinylether-terminated monomers were synthesized and statistically copolymerized via thermal cycloaddition to obtain a series of polymers containing 20-60 mol% of biphenyl units(PBS-X). The post-sulfonation of PBS-X was carried out using chlorosulfonic acid(CSA) to obtain copolymers with various sulfonation levels(SPBS-X). All the synthesized compounds, monomers and polymers were characterized by 1H-NMR, 19F-NMR and FT-IR. It was confirmed that the ion exchange capacity(IEC), water uptake and ion conductivity of SPBS-X increased with the increment of sulfonated biphenyl units. Particularly, SPBS-60 showed higher ion conductivity compared to Nafion®-115 at 25∼80 ℃.

불소 관능기인 perfluorocyclobutane(PFCB)기를 함유하는 설폰화된 부분 불소계 poly(biphenyleneco-sulfone)ether 공중합체(SPBS-X)를 제조하였다. 제조과정은 trifluorovinylether그룹을 양 말단에 포함하는 단량체의 합성, 고리화부가 반응형태의 열중합 그리고 후설폰화(post-sulfonation)의 3단계 합성과정을 통하였다. Trifluorovinylether그룹을 양 말단에 포함하는 biphenyl계와 sulfonyl계 단량체를 합성하였고, biphenyl계의 함량을 20 mol%에서 60 mol%까지 조절하면서 고리화부가 반응형태의 열중합을 통해 랜덤 공중합체가 얻어졌다(PBS-X). 후설폰화는 chlorosulfonic acid(CSA)를 사용하여 수행되었으며, 이를 통해 다양한 설폰화도를 가지는 고분자를 합성하였다. 1H-NMR, 19F-NMR 및 FT-IR 분석을 통하여, 제조된 화합물, 단량체 및 중합체들이 성공적으로 합성되었음을 확인하였다. 상온에서 CSA에 대해 설폰화 활성을 가지는 biphenyl기의 함량이 증가함에 따라 이온교환능력(IEC), 함수율 및 이온전도도가 증가하는 경향을 보였고, SPBS-60의 경우 넓은 온도범위(25∼80 ℃)에서 Nafion®-115보다 높은 이온전도도(80 ℃: 0.08 S/cm at RH 100%)를 나타내었다.

Keywords: sulfonated polymer electrolyte membrane; fluorinated polymer; fuel cell; poly(arylene ether sulfone)

References
  • 1. Carrette L, Friedrich KA, Stimming U, Fuel cells, 1, 5 (2001)
  •  
  • 2. Rikukawa M, Sanui K, Prog. Polym. Sci., 25, 1463 (2000)
  •  
  • 3. Winter M, Brodd RJ, Chem. Rev., 104(10), 4245 (2004)
  •  
  • 4. Hickner MA, Ghassemi H, Kim YS, Einsla BR, McGrath JE, Chem. Rev., 104(10), 4587 (2004)
  •  
  • 5. Li L, Wang YX, J. Membr. Sci., 246(2), 167 (2005)
  •  
  • 6. Wang F, Hickner M, Kim YS, Zawodzinski TA, McGrath JE, J. Membr. Sci., 197(1-2), 231 (2002)
  •  
  • 7. Yang YS, Shi ZQ, Holdcroft S, Macromolecules, 37(5), 1678 (2004)
  •  
  • 8. Kim DS, Park HB, Jang JY, Lee YM, J. Polym. Sci. A: Polym. Chem., 43(22), 5620 (2005)
  •  
  • 9. Miyatake K, Chikashige Y, Watanabe M, Macromolecules, 36(26), 9691 (2003)
  •  
  • 10. Rikukawa M, Sanui K, Prog. Polym. Sci., 25, 1463 (2000)
  •  
  • 11. Gil M, Ji XL, Li XF, Na H, Hampsey JE, Lu YF, J. Membr. Sci., 234(1-2), 75 (2004)
  •  
  • 12. Xing PX, Robertson GP, Guiver MD, Mikhailenko SD, Wang KP, Kaliaguine S, J. Membr. Sci., 229(1-2), 95 (2004)
  •  
  • 13. Miyatake K, Zhou H, Matsuo T, Uchida H, Watanabe M, Macromolecules, 37(13), 4961 (2004)
  •  
  • 14. Genies C, Mercier R, Sillion B, Cornet N, Gebel G, Pineri M, Polymer, 42(2), 359 (2001)
  •  
  • 15. Wiles KB, de Diego CM, de Abajo J, McGrath JE, J. Membr. Sci., 294(1-2), 22 (2007)
  •  
  • 16. Wong S, Ma H, Jen AKY, Barto R, Frank CW, Macromolecules, 36(21), 8001 (2003)
  •  
  • 17. Wong S, Ma H, Jen AKY, Barto R, Frank CW, Macromolecules, 37(15), 5578 (2004)
  •  
  • 18. Smith Jr. DW, Babb DA, Shah HV, Hoeglund A, Traiphol R, Perahia D, Boone HW, Langhoff C, Radler M, J. Fluorine Chem., 104, 109 (2000)
  •  
  • 19. Yoo MC, Chang BJ, Kim JH, Lee SB, Lee YT, Membrane J., 15, 355 (2005)
  •  
  • 20. Shang XY, Tian SH, Kong LH, Meng YZ, J. Membr. Sci., 266(1-2), 94 (2005)
  •  
  • 21. Babb DAPolymers from the thermal [2π+2π] cyclodimerization of fluorinated olefins, Plenum Press, New York, p 25 (1999)
  •  
  • 22. Zaidi SMJ, Mikhailenko SD, Robertson GP, Guiver MD, Kaliaguine S, J. Membr. Sci., 173(1), 17 (2000)
  •  
  • 23. Lee CH, Hong YT, Lee JH, Park HB, Han DW, Lee YM, Polym. Sci. Tech., 15, 578 (2004)
  •  
  • 24. Roy A, Hickner MA, Einsla BR, Harrison WL, Mcgrath JE, J. Polym. Sci. A: Polym. Chem., 47(2), 384 (2009)
  •  
  • 25. Lee HS, Badami AS, Roy A, Mcgrath JE, J. Polym. Sci. A: Polym. Chem., 45(21), 4879 (2007)
  •  
  • 26. Lee C, Sundar S, Kwon J, Han H, J. Polym. Sci. A: Polym. Chem., 42(14), 3612 (2004)
  •  
  • 27. Go S, He GH, Wu XM, Li CN, Liu HJ, Lin C, Li XC, J. Membr. Sci., 281(1-2), 121 (2006)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2010; 34(2): 137-143

    Published online Mar 25, 2010

  • Received on Nov 2, 2009
  • Accepted on Nov 26, 2009