Article
  • Preparation and Actuation Performance of Ionic Polymer-Metal Composite Actuators Based on Nafion-Alumina Composite Membranes
  • Lee JW, Kim WS, Yoo YT
  • 나피온-알루미나 복합막을 사용한 이온성 폴리머-금속 복합체 작동기의 제작 및 성능 평가
  • 이장우, 김우성, 유영태
Abstract
Ionic polymer-metal composite (IPMC) actuator generates bending actuation via ion/water flux to the cathode side under an electric field. Polyelectrolytes in IPMC should possess high waterretention capability, proton conductivity, and Young's modulus. In this study, for endowing IPMCs with these properties, Nafion-alumina composite membranes containing α- or γ-aluminas of 4~8 wt% were prepared. Mechanical moduli of Nafion-alumina composite membranes were 7~13 MPa higher than that of Nafion, with the slight decrease in proton conductivity. At DC 3 V, the actuation performance of the Nafion-α-alumina (8 wt%)-IPMC was superior to that of the typical Nafion-IPMC, exhibiting 2.7 times the displacement with an enhanced blocking force. The enhanced actuation performance with the Nafion-α-alumina composite membranes was attributed to the higher proton conductivity, the elevated ion/water flux, and the lower interfacial electric resistance of platinum electrodes and membrane, compared with those containing γ-alumina.

전기활성 고분자 중의 하나인 이온성 폴리머-금속 복합체(ionic polymer-metal composites, IPMC) 작동기는 전압 인가 시 고분자전해질 내부에 존재하는 양이온과 물이 음극 방향으로 이동하면서 변위를 발생시킨다. 이러한 IPMC의 전해질은 높은 보습력, 프로톤 전도도 및 기계적 강도를 지녀야 하며, 이를 위해 본 연구에서는 IPMC의 고분자전해질인 나피온 층에 α-, γ-알루미나를 4∼8 wt%의 함량으로 도입하여 나피온-알루미나 복합막을 제조하고 그 특성을 확인하였다. 알루미나의 함량이 증가함에 따라, 나피온 복합막의 프로톤 전도도는 조금씩 감소하는 경향을 보였으며, α-알루미나에 비해 γ-알루미나를 첨가하였을 때 전도도 감소가 더욱 컸다. 나피온-알루미나 복합막의 기계적 모듈러스는 37.16 MPa인 순수 나피온 막에 비해 모든 함량에서 7∼13 MPa 높았다. 또한 준비된 나피온-알루미나 복합막을 이용 하여 IPMC를 제작하였고 직류 3 V의 인가전압 하에서 작동성능을 평가하였다. 나피온-알루미나-IPMC, 특히 8 wt% 의 α-알루미나가 첨가된 IPMC는 기존 나피온-IPMC에 비해 작동변위는 2.7배 향상되었고 작동력 또한 크게 향상되었다. α-알루미나의 첨가에 따른 작동성능의 향상은 γ-알루미나가 첨가된 복합막에 비해 상대적으로 높은 α-알루미나 복합막의 양성자 전도도 그리고 잘 분산된 알루미나 입자 표면에 존재하는 다량의 수분에 의한 이온/물 이동의 용이성, 또한 순수 나피온 막에 비해 전해질 막과 백금전극 사이의 낮은 전기적 저항 때문인 것으로 결론지었다.

Keywords: ionic polymer-metal composite; actuators; alumina; Nafion.

References
  • 1. Shahinpoor M, Kim KJ, Smart Mater. Struct., 10, 819 (2001)
  •  
  • 2. Cohen YBProc. 42nd AIAA Structures, Structural Dynamics, and Materials Conference, Gossamer Spacecraft Forum, Pasadena CA, Editor, 1, Seattle, WA, USA (2001)
  •  
  • 3. Lee JH, Lee DS, Kim HK, Lee YK, Choi HR, Kim HM, Jeon JW, Tak YS, Nam JD, Polym.(Korea), 26(1), 105 (2002)
  •  
  • 4. Asaka K, Oguro K, J. Electroanal. Chem., 480(1-2), 186 (2000)
  •  
  • 5. Akle BJ, Bennett MD, Leo DJ, Sens. Actuators, A, 126, 173 (2006)
  •  
  • 6. Nam JD, Choi HR, Tak YS, Kim KJ, Sens. Actuators, A, 105, 83 (2003)
  •  
  • 7. Nguyen VK, Lee JW, Yoo YT, Sens. Actuators, B, 120, 529 (2007)
  •  
  • 8. Lee DY, Lee MH, Kim KJ, Heo S, Kim BY, Lee SJ, Surf. Coat. Technol., 200, 1920 (2005)
  •  
  • 9. Chao WK, Lee CM, Tsai DC, Chou CC, Hsueh KL, Shieu FS, J. Power Sources, 185, 136 (2008)
  •  
  • 10. Paglia GPh. D. Dissertation, Curtin University of Technology, Perth, Australia (2004)
  •  
  • 11. Hart LD, Ed.Alumina Chemicals: Science and Technology Handbook, The American Ceramic Society, Inc., Ohio (1990)
  •  
  • 12. Han MJ, Park JH, Lee JY, Jho JY, Macromol. Rapid Commun., 27(3), 219 (2006)
  •  
  • 13. Su X, Zhang G, Xu K, Wang J, Song C, Wang P, Polym. Bull., 60, 69 (2008)
  •  
  • 14. Fu T, Cui Z, Zhong S, Shi Y, Zhao C, Zhang G, Shao K, Na H, Xing W, J. Power Sources, 185, 32 (2008)
  •  
  • 15. Rhee CH, Kim Y, Lee JS, Kim HK, Chang H, J. Power Sources, 159(2), 1015 (2006)
  •  
  • 16. Lee SK, Kim BM, Kim BK, Pak JH, Trans. KIEE, 52C, 144 (2003)
  •  
  • 17. Chen CY, Garnica-Rodriguez JI, Duke MC, Dalla Costa RF, Dicks AL, da Costa JCD, J. Power Sources, 166(2), 324 (2007)
  •  
  • 18. Jiang Z, Zheng X, Wu H, Pan F, J. Power Sources, 185, 85 (2008)
  •  
  • 19. Cho HW, Kim JS, Yoo EA, Ahn WS, Bull. Korean Chem. Soc., 9, 244 (1988)
  •  
  • 20. Sinkler W, Bradley SA, Ziese U, Jong KP, Microsc. Microanal., 12, 52 (2006)
  •  
  • 21. Coelho ACV, Santos HS, Kiyohara PK, Marcos KNP, Santos PS, Mater. Res., 10, 183 (2007)
  •  
  • 22. Kim Y, Lee JS, Rhee CH, Kim HK, Chang H, J. Power Sources, 162(1), 180 (2006)
  •  
  • 23. Noh TG, Tak Y, Nam JD, Choi H, Electrochim. Acta, 47(13-14), 2341 (2002)
  •  
  • 24. Lim HT, Lee JW, Yoo YT, J. Korean Phys. Soc., 49, 1101 (2006)
  •  
  • 25. Cha GC, Song JS, Lee S, Mun MS, Polym.(Korea), 30(6), 471 (2006)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2009; 33(4): 377-383

    Published online Jul 25, 2009

  • Received on Mar 19, 2009
  • Accepted on Apr 30, 2009