Article
  • Synthesis and Characteristics of Hyaluronic Acid Bead Crosslinked by 1,3-Butadiene diepoxide
  • Kwon JY, Cheong SI
  • 1,3-Butadiene diepoxide에 의해 가교된 히아루론산 비드의 제조 및 특성
  • 권지영, 정성일
Abstract
Hyaluronic acid-based beads were prepared in order to develop a biomedical material for augumentation. Hyaluronic acid was crosslinked by 1,3-butadiene diepoxide in a suspension state maintained by rapid mixing of soybeen oil and hyaluronic acid solution. The particle size, surface area and swelling ratio were measured to investigate the physical properties of the synthesized beads and the bead surface was examined by scanning electron microscopy. The beads were formed in the range of 5-12 vol% concentration of crosslinking agent, which showed monodisperse size distribution. Both BET surface area and swelling ratio decreased as the concentration of either hyaluronic acid or crosslinking agent increased, and crosslinking temperature decreased. Bead size could be effectively controlled by mixing speed without affecting other physical property.

인체 보형물의 생체 재료로 사용할 목적으로 히아루론산 비드를 제조하였다. 히아루론산 수용액과 콩기름을 섞어서 얻어진 현탁상태에서 히아루론산을 1,3-butadiene diepoxide로 가교시켰다. 제조된 비드의 물성을 살펴보기 위해 직경, 표면적과 팽윤도를 측정하였고 전자현미경으로 표면상태를 관찰하였다. 가교제의 농도가 5-12 vol% 범위에서 비드가 형성되었으며 제조된 비드는 단순분산성을 보였다. 히아루론산 농도 혹은 가교제 농도가 증가할수록, 가교 온도가 감소할수록, BET 표면적과 팽윤도가 감소하였다. 혼합속도의 변화에 의해 비드의 물성은 거의 변하지 않았으나 비드의 크기는 효과적으로 조절되었다.

Keywords: hyaluronic acid; 1,3-butadiene diepoxide; bead; crosslinking; size control.

References
  • 1. Wichterle O, Lim D, Nature, 185, 117 (1960)
  •  
  • 2. Peppas NAHydrogels in Medicine and Pharmacy, Boca Raton, Vol. I, II, III, CRC Press Inc., Florida (1986)
  •  
  • 3. Khang G, Kim MS, Cho SH, Lee HB, Chang JH, Kim KJ, Polym. Sci. Technol., 14(4), 431 (2003)
  •  
  • 4. Lim F, Sun AM, Science, 210, 908 (1980)
  •  
  • 5. Palmieri G, Giardina P, Desiderio B, Marzullo L, Giamberini M, Sannia G, Enzyme Microb. Technol., 16(2), 151 (1994)
  •  
  • 6. Akertek E, Tarhan L, Appl. Biochem. Biotechnol., 50(3), 291 (1995)
  •  
  • 7. Declerck S, Strullu D, Plenchette C, J. Biotechnol., 48, 51 (1996)
  •  
  • 8. Clayton H, James R, London N, Acta Diabetol., 30, 181 (1993)
  •  
  • 9. Ngah WSW, Endud CS, Mayanar R, React. Funct. Polym., 50, 181 (2002)
  •  
  • 10. Chiou M, Li H, J. Hazard. Mater., B93, 233 (2002)
  •  
  • 11. Tokita Y, Pkamoto A, Eur. Polym. J., 32, 1011 (1996)
  •  
  • 12. Zhong SP, Campoccia D, Doherty PJ, Benedetti RL, Williams DF, Biomaterials, 15, 359 (1994)
  •  
  • 13. Prestwitch GD, Marecak DM, Marecek JF, J. Control. Release, 53, 93 (1998)
  •  
  • 14. Luo Y, Kirker KR, Prestwich GD, J. Control. Release, 69, 169 (2000)
  •  
  • 15. Park S, Park J, Kim HO, Song MJ, Suh H, Biomaterials, 22, 1205 (2002)
  •  
  • 16. Park S, Lee HJ, Lee KH, Suh H, Biomaterials, 24, 1631 (2003)
  •  
  • 17. Nam HS, Kim JH, An JH, Chung DJ, Polym.(Korea), 25(4), 476 (2001)
  •  
  • 18. Delco PA, Stefanetti M, Pressato D, Piana S, Dona M, Pavesio A, Fertil. Steril., 69, 318 (1998)
  •  
  • 19. Hunt JA, Joshi HN, Stella VJ, Topp EM, J. Control. Release, 12, 159 (1990)
  •  
  • 20. Benedetti L, Cortivo R, Berti T, Berti A, Pea F, Marzzo M, Moras M, Abatangelo G, Biomaterials, 14, 1154 (1993)
  •  
  • 21. Aigner J, Tegeler J, Hutzler P, Campoccia D, Pavesio A, Hammer C, J. Biomed. Mater. Res., 42, 172 (1998)
  •  
  • 22. Ouwerx C, Velings N, Mestdagh MM, Axelos MAV, Polymer Gels and Networks, 6, 393 (1998)
  •  
  • 23. Zhang L, Cheng G, Fu C, React. Funct. Polym., 56, 167 (2003)
  •  
  • 24. Murakata T, Honma H, Nakazato S, Kuroda C, Sato S, J. Chem. Eng. Jpn., 34(3), 299 (2001)
  •  
  • 25. Gomez KA, Gomez AAStatistical Procedures for Agricultural Research, 2nd ed., John Wiely and Sons, New York (1984)
  •  
  • 26. Rodriguez FPrinciples of Polymer Systems, 3rd ed., Hemisphere Publishing Co,. New York (1989)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2005; 29(5): 445-450

    Published online Sep 25, 2005

  • Received on Apr 29, 2005
  • Accepted on Jul 28, 2005