Article
  • Characterization of Stretchable Polypyrrole Films Prepared by Chemical and Electrochemical Method
  • Jang KS, Moon B, Oh EJ, Hong JH
  • 화학적 및 전기화학적 방법으로 합성한 연신성 폴리피롤 필름의 특성
  • 장관식, 문봉진, 오응주, 홍장후
Abstract
Stretchable polypyrrole films using functionalized doping agent, di(2-ethylhexyl) sulfosuccinate sodium salt (NaDEHS), were synthesized by chemical and electrochemical method. Chemically and electrochemically prepared polypyrrole films were stretch-oriented (L/L0=1.0 ~ 2.5) by zone drawing method and the electrical conductivities were measured. As the draw ratio was increased, the electrical conductivities were increased. This result was confirmed by the increase in crystallinity through the increase in draw ratio. The temperature dependence of electrical conductivity showed that 3D-variable range hopping model (L/L0=1.0 ~ 2.0) and ID-VRH model (L/L0=2.5) gave the best fit to the data for stretched Ppy-DEHS films.

기능성 도핑제인 di(2-ethylhexyl) sulfosuccinate sodium salt (NaDEHS)을 사용하여 화학적, 전기화학적 방법에 의한 연신성 폴리피롤을 합성하였다. 화학적, 전기화학적 방법에 의해 제조된 폴리피롤 필름은 구역 연신 방법을 사용하여 1.0 ~ 2.5배 연신시킬 수 있었으며, 연신된 폴리피롤 필름의 전기 전도도를 측정하였다. 연신율이 증가함에 따라 필름의 전기 전도도는 증가함을 볼 수 있었다. 이러한 현상은 연신율에 따른 결정성 증가로 설명할 수 있었다. 온도변화에 따른 전하 이동 경로는 1.0 ~ 2.0배 연신된 폴리피롤의 경우 3차원 variable range hopping 모델, 2.5배 연신된 폴리피롤의 경우 1차원 VRH 모델에 적합함을 볼 수 있었다.

Keywords: stretchable polypyrrole; draw ratio; electrical conductivity; di(2-ethylhexyl)sulfosuccinate sodium salt); zone drawing method

References
  • 1. Dall'olio A, Dascola Y, Varaca V, Compfes Rendus, C267, 433 (1968)
  •  
  • 2. Machida S, Miyata S, Techagumpuch T, Synth. Met., 31, 311 (1989)
  •  
  • 3. Diaz AF, Kanazawa KK, Gardini GP, J. Chem. Soc., 635 (1979)
  •  
  • 4. Diaz MA, Schwartz BJ, Anderson MR, Heeger AJ, Synth. Met., 84, 455 (1997)
  •  
  • 5. Pfluger P, Street GB, J. Chem. Phys., 80, 544 (1984)
  •  
  • 6. Nelson AJ, Glenis S, Frank AJ, J. Vac. Sci. Technol., 6, 954 (1987)
  •  
  • 7. Yakushi K, Lauchlan LJ, Clake TC, Street GB, J. Chem. Phys., 79, 4774 (1983)
  •  
  • 8. Collard DM, Stoakes MS, Chem. Mater., 6, 850 (1985)
  •  
  • 9. Bubitsky YA, Zhubanov BA, Maresch GG, Synth. Met., 41, 373 (1991)
  •  
  • 10. Rapi S, Bochi V, Gardini GP, Synth. Met., 32, 351 (1989)
  •  
  • 11. Zeller MV, Hahn SJ, SIC Surf. Interface Anal., 11, 327 (1988)
  •  
  • 12. Chen SA, Liao CS, Macromolecules, 26, 2810 (1993)
  •  
  • 13. Chao S, Wrighton MS, J. Am. Chem. Soc., 109, 2197 (1987)
  •  
  • 14. Collard DM, Stoakes MS, Chem. Mater., 6, 850 (1985)
  •  
  • 15. Audebert P, Bidan G, Lapkowski MElectronic Properties of Conjugated Polymers, D.A. Seanor, Academic Press, New York, p. 366 (1987)
  •  
  • 16. Kim DY, Lee JY, Kim CY, Kang ET, Tan KL, Synth. Met., 72, 243 (1995)
  •  
  • 17. Lee JY, Kim DY, Kim CY, Synth. Met., 74, 103 (1995)
  •  
  • 18. Oh EJ, Jang KS, Synth. Met., 119, 107 (2001)
  •  
  • 19. Jang KS, Han SS, Suh JS, Oh EJ, Synth. Met., 119, 109 (2001)
  •  
  • 20. Oh EJ, Jang KS, Macdiarmid AG, Synth. Met., 125, 267 (2002)
  •  
  • 21. Pfluger P, Krounbi M, Street GB, Weiser G, J. Chem. Phys., 78, 3212 (1983)
  •  
  • 22. Joo J, Lee JK, Oh EJ, Epstein AJ, Synth. Met., 117, 45 (2001)
  •  
  • 23. Mott NF, Davis EElectronic Processes in Non-Crystalline Materials, Cardon Press, Oxford (1979)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2003; 27(4): 323-329

    Published online Jul 25, 2003

  • Received on Dec 7, 2002
  • Accepted on May 23, 2003