Article
  • Discoloration and the Effect of Antioxidants on Thermo-Oxidative Degradation of Polyamide 6
  • Heo MH, Kim SW, Ha GR, Mori T, Hong KH, Seo KH
  • 폴리아미드 6의 열 산화반응에 의한 황변 현상과 산화방지제의 효과
  • 허민호, 김상우, 하기룡, Mori T, 홍기헌, 서관호
Abstract
In this study, the effect of various concentrations of antioxidants on thermo- oxidative degradation of polyamide 6 was investigated. Unstabilized and stabilized polyamides 6 were subjected to long-term oven aging in ambient atmosphere at 70∼160 ℃. All of specimens were discolored within 100 hr at temperature range of 70∼160 ℃. Optimum antioxidant concentration was determined from the data of mechanical properties, yellowness index and relative viscosity. The synergistic effect of each primary and secondary antioxidant concentrations was not observed. Yellowing phenomenon was explained by using NMR, IR and EA. Different carbonyl groups were detected by 13C NMR. During thermooxidative degradation, oxygen consumptions were determined by EA. The lifetime after long-term aging was predicted using Arrhenius equation.

본 연구에서는 폴리아미드 6 (PA 6)을 70∼160 ℃에서 장시간 사용하였을 때 산화방지제의 사용유무 및 농도에 따른 열 안정성을 조사하였다. 70∼160 ℃의 온도범위내의 열 산화반응 시 모든 시료는 100시간 내에 황변 현상이 일어났다. 기계적 물성, 황변 지수, 점도측정으로 가장 적정한 산화방지제의 농도를 조사하였다. 일, 이차 산화방지제의 조성변화에 의한 산화방지효과는 미미하였다. 황변 현상의 분석은 NMR, IR, 그리고 element analysis (EA)를 사용하였다. 13C NMR에 의해 서로 다른 카르보닐기의 존재를 확인하였으며, 산소의 소모량 측정은 EA를 사용하였다. Arrhenius식을 이용하여 산화방지제를 첨가한 시료와 그렇지 않은 시료의 lifetime을 예측하였다.

Keywords: polyamide 6; antioxidant; Arrhenius equations; lifetime prediction

References
  • 1. Reimschuessel HK, J. Polym. Sci. : Macromol. Rev., 12, 65 (1977)
  •  
  • 2. Sweeny W, Zimmerman JEncyclopedia of Polymer Science and Engineering, 2nd Ed., ed. by J.I. Kroschwifz, p. 315, vol. 11, John Wiley & Sons, New York (1990)
  •  
  • 3. Schlack PGerman Patent, 748,253 (1938)
  •  
  • 4. Schlack PU.S. Patent, 2,241,321 (1941)
  •  
  • 5. Floyd DEPolyamide Resins, Reinhold, New York (1966)
  •  
  • 6. Williams IG, Plast. Today, 19, 14 (1984)
  •  
  • 7. Kohan MINylon Plastics, p. 18, John Wiley & Sons, Inc., New York (1973)
  •  
  • 8. Karstens T, Rossback V, Makromol. Chem., 190, 3033 (1989)
  •  
  • 9. Rongfu LI, Xingzhou HU, Polym. Degrad. Stabil., 62, 523 (1998)
  •  
  • 10. Levchik SV, Dweiland E, Lewin M, Polym. Int., 48, 532 (1999)
  •  
  • 11. Allen NS, Polym. Degrad. Stabil., 8, 55 (1984)
  •  
  • 12. Allen NS, Harrison MJ, Follows GW, Matthews V, Polym. Degrad. Stabil., 19, 77 (1987)
  •  
  • 13. Allen NS, Mckellar JF, Philips GO, J. Polym. Sci. A: Polym. Chem., 12, 2623 (1974)
  •  
  • 14. Do CH, Pearce EM, Bulkin BJ, Reimschuessel HK, J. Polym. Sci. A: Polym. Chem., 25, 2409 (1987)
  •  
  • 15. Do CH, Pearce EM, Bulkin BJ, Reimschuessel HK, J. Polym. Sci. A: Polym. Chem., 25, 2301 (1987)
  •  
  • 16. Forsstrom D, Terselius B, Polym. Degrad. Stabil., 67, 69 (2000)
  •  
  • 17. Jacobson K, Stenberg B, Terselius B, Reitberger T, Polym. Degrad. Stabil., 65, 449 (1999)
  •  
  • 18. Zweifel HPlastics Additives Handbook, 5th ed., p. 19, Hanser Gardner, New York (2001)
  •  
  • 19. Hurnik HPlastic Additives, 3rd ed., eds. by R. Gachter and H. Muller, p. 82, Hanser, New York (1990)
  •  
  • 20. Zweifel HPlastics Additives Handbook, 5th Ed., p. 10, Hanser Gardner, New York (2001)
  •  
  • 21. Dakin TW, AIEE Trans., 67, 113 (1948)
  •  
  • 22. LeHuy M, Evrard G, Angew D, Makromol. Chem., 261, 135 (1998)
  •  
  • 23. Gillen KT, Celina M, Polym. Degrad. Stabil., 71, 15 (2001)
  •  
  • 24. Standard Test Methods for Tensile Properties of Plastics, Annual Book of ASTM Standards, Philadelphia, PA, 1991, vol. 8, ASTM D638
  •  
  • 25. Standard Test Methods for Yellowness Index of Plastics, Annual Book of ASTM Standards, Philadelphia, PA, 1991, vol. 8, ASTM D1925
  •  
  • 26. George SInfrared Characteristic Group Frequencies, 2nd Ed., p. 34, John Wiley & Sons, New York (1994)
  •  
  • 27. Song KH, Lee RY, J. Korea Inst. Ind. Educ., 8, 137 (1983)
  •  
  • 28. Brandolini AJ, Hills DDNMR Spectra of Polymers and Polymer Additives, p. 403, Marcel Dekker, New York (2000)
  •  
  • 29. Gugumus F, Polym. Degrad. Stabil., 60, 99 (1998)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2002; 26(4): 452-461

    Published online Jul 25, 2002

  • Received on Feb 2, 2002
  • Accepted on Apr 17, 2002