Article
  • A Study on the Compatibilization of Blends Based on Poly(phenylene ether) and Polyamide
  • Kim H, Lim JC
  • Poly(phenylene ether)/Polyamide 블렌드의 상용화에 관한 연구
  • 김형수, 임종철
Abstract
Compatibilization of blends based on poly(phenylene ether) (PPE) and polyamide(PA) has been practiced with the incorporation of a copolymer formed by grafting polystyrene onto polybutadiene latex(g-BS) which is further functionalized with maleic anhydride(MAH) (g-BS *) to impart reactivity with amine groups of PA. The major focus has been placed on the effect of the various structural factors in g-BS * on the phase morphology and mechanical performance of the blends. For the balance of impact strength and heat resistance, it was important to locate g-BS particles inside of the PPE phase, which was accomplished by the proper control of the molecular weight and amount of PS in g-BS *. For g-BS * 's having constant molecular weight and amount of PS, the reduction of MAH content or increase of rubber particle size in g-BS * resulted in the increase of domain size and consequently loss in mechanical properties. Based on the comparison made with the conventional PPE/PA blend comprising MAH grafted PPE as a compatibilizer, it was confirmed that the comparable level of mechnical performance can be achieved by an appropriate g-BS * type material with improved whiteness index.

폴리페닐렌 에테르 (PPE)/폴리아미드 (PA)를 근간으로 하는 블렌드를 상용화하기 위하여 부타디엔 고무에 스티렌이 그라프트된 공중합체 (g-BS)를 합성하고 여기에 폴리아미드의 말단기인 아민기와 반응성이 높은 무수말레인산기를 그라프트시킨 g-BS*를 도입하여 블렌드의 형태학과 기계적 성질의 변화를 조사하고 상용화제로서의 성능을 평가하였다. 폴리아미드 연속상에 분산되어 있는 PPE상의 크기와 이에 따른 기계적 성질의 변화는 사용된 g-BS의 구조와 관능기의 함량과 밀접한 관계를 나타내었다. 블렌드의 내열성과 내충격성의 균형을 위하여 g-BS성분을 PPE상에 내재시키는 것이 중요하고, 이러한 상구조의 형성은 g-BS에 포함된 폴리스티렌의 함량과 분자량이 적절하게 유지될 때 가능하였다. 고무함량과 그라프트된 폴리스티렌의 분자량이 일정하게 고정된 상태에서, g-BS*에 존재하는 무수말레인산의 함량이 낮거나, 고무입자의 크기가 커질 경우에는 연속상과 분산상의 계면 보강이 효과적으로 이루어지지 못하여 기계적 성질이 저하되었다. 본 연구에서 적용한 g-BS*를 사용하면, 폴리페닐렌 에테르에 관능기를 도입하여 상용화하는 기존의 방법과 동등한 정도의 물성이 달성될 수 있으며, 자연 색상이 보다 우수한 수지의 제조가 가능함을 확인하였다.

Keywords: Poly(phenylene ether); Polyamide; Ternary Blends; Reactive Compatibilization

References
  • 1. Ueno K, Maruyama TU.S. Patent, 4,315,086 (1982)
  •  
  • 2. Jalvart RL, Grant TSU.S. Patent, 4,654,405 (1987)
  •  
  • 3. Grant TS, Howe DVU.S. Patent, 4,740,552 (1988)
  •  
  • 4. Djordjevic MB, Porter RS, Polym. Eng. Sci., 23, 650 (1983)
  •  
  • 5. Wu S, Polymer, 26, 1855 (1985)
  •  
  • 6. Borggreve RJM, Gaymans RJ, Schuijer J, Housz JFI, Polymer, 28, 1489 (1987)
  •  
  • 7. Wu S, J. Appl. Polym. Sci., 35, 549 (1988)
  •  
  • 8. Oshinski AJ, Keskkula H, Paul DR, Polymer, 33, 268 (1992)
  •  
  • 9. Yang S, Char K, Lim JC, Kim H, Ryu SH, Polym.(Korea), 23(4), 523 (1999)
  •  
  • 10. Lee SC, Kim HS, Hong IK, Yoon YS, Korean J. Rheol., 9(4), 133 (1997)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2001; 25(3): 441-449

    Published online May 25, 2001

  • Received on Jan 9, 2001