Article
  • Fabrication of PP/Carbon Fiber composites by Introducing Reactive Interphase and its Properties
  • Kim M, Kim J, Kim W, Choi Y, Hwang B
  • 반응성 고분자 계면상을 도입한 PP/탄소섬유 복합재료의 제조와 물성
  • 김민영, 김지홍, 김원호, 최영선, 황병선
Abstract
In general, the development of thermoplastic composites has been confronted with difficult problems such as the weak bonding strength between fibers and matrix. However, now, such problems are being surmounted by the development of resins, the improvement of processes, and introduction of interphase. Especially, the introduction of interphase between fiber and matix and help a dissipation of the impact energy and provide a good adhesion between fobers and matrix. In this study, polymeric interphase was introduced by electrodeposition, modified polypropylene was added to improve the weak bonding strength between interphase andpolypropylene matrix. By evaluation of interlaminar shear strength and impact strength of the composites, it was found that composites with introduced composites showed higher mechanical properties than those of composites without interphase. Reactive polymers which have either anhydride or free acid functional group were used as interphase materials, and these polymers also behave as charge carrier in aqueous solution during the electrodeposition process. Weight gain on the carbon fibers was evaluated by changing process parameters such as concentration of solution, current density, and electrodeposition time.

일반적으로 열가소성 복합재료는 섬유와 기지재료간의 결합력이 약하다는 단점을 가지고 있어 개발의 한계를 가져왔으나 점차적으로 수지의 개발, 공정의 개선, 계면상의 도입으로 지속적인 물성 향상을 이루고 있다. 특히 계면상의 도입은 외부에서 받은 충격을 잘 흡수할 뿐만 아니라 기지재료와 섬유와으이 결합력을 높여 준다. 본 연구에서는 탄소섬유의 전기전도성을 이용하여 전착(electrodeposition)에 의해 탄소섬유와 수지 사이에 께면상을 도입하였으며 계면상 물질과 폴리프로필렌 수지와의 약한 결합력을 개선하기 위해 modified polypropylene을 수지에 첨가하였다. 대표적인 열가소성 수지인 폴리프로필렌을 기지재료로 사용하여 복합재료를 제조하여 층간전단강도, 충격강도 등의 기계적 물성을 평가한 결과, 전착을 통한 계면상을 도입하였을 경우가 물성이 우수함을 확인할 수 있었다. 전착 공정에서는 anhydride 또는 free acid group을 가진 반응ㅇ성 고분자를 사요하여 수용액상에서 전하 운반체 역할을 수행할 수 있게 하였고 고분자의 종류를 달리하여 계면상 물질의 변화에 따른 복합재료의 물성 차이를 평가하였다. 또한 함침 용액의 농도, 전류밀도 및 전착시간을 변화시키면서 탄소섬유에의 전착수율을 평가하였다.

Keywords: thermoplastic composites; electrodeposition; interphase; polypropylene; carbon fiber

References
  • 1. Mathews FLComposite Materials: Engineering and Science, Champmnan & Hall, 1993 (1993)
  •  
  • 2. Subramanian RV, Pure Appl. Chem., 52, 1929 (1980)
  •  
  • 3. Hays DR, White CS, J. Paint Technol., 41, 961 (1969)
  •  
  • 4. Jang BZAdvanced Polymer Composites: Princeples and Application, ASM International, 1994 (1994)
  •  
  • 5. Kim M, Kim J, Kim W, Kim B, Hwang B, Choi Y, J. Korean Ind. Eng. Chem., 9(6), 894 (1998)
  •  
  • 6. Kim M, Kim J, Bae J, Kim W, Hwang B, Choi Y, J. Korean Ind. Eng. Chem., 10(3), 336 (1999)
  •  
  • 7. Bell JP, Wimolkiatisak AS, Rhee HW, Chang J, Joseph R, Kim W, Scola DA, J. Adhes., 53(1), 103 (1995)
  •  
  • 8. Crasto ASInterphase Modification in Carbon Fiber Composites via Electrodeposition, Doctor Thesis, University of Washington State, 1986 (1986)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2000; 24(4): 556-563

    Published online Jul 25, 2000