Article
  • Chemorheological Study of Biphenyl-Type Epoxy/Phenol Novolac Resin System
  • Kim HY, Moon KS, Han S, Kim JM, Ryu JH, Yoon HG
  • Biphenyl계 에폭시 Phenol Novolac 수지 조성물의 화학레올로지 연구
  • 김현용, 문경식, 한승, 김진모, 유제홍, 윤호규
Abstract
A chemorheological study of biphenyl-type epoxy/phenol novolac system was performed at different isothermal curing temperatures. To predict the chemoviscosity during isothermal curing reaction. modified Willians-Landel-Ferry (WLF) equation was used. Glass transition temperature change due to curing reaction measured by DSC could be expressed as a function of conversion. From the measurements of isothermal viscosity, C1 and C2 in WLF equation were found to have an Arrhenius-type dependence on temperature. By using these relations in conjunction with modified WLF equation, good agreement between predicted and experimental viscosity was observed.

등온경화조건에서 biphenyl계 에폭시/phenol novolac 수지 조성물의 호학레올로지 연구를 수행하였다. 등온경화반응에 따른 점도의 변화를 예측하기 위해 modified Wiliams-L뭉디-Ferry (WLF)식을 이용하였다. DSC 측정으로부터 경화반응에 따른 유리전이온도의 변화를 전환량의 함수로 표현할 수 있었다. 등온경화반응에 따라 측정된 점도의 변화를 이용하여 WLF식에서의 C1, C21, C2

Keywords: chemorheology; biphenyl-type epoxy/phenol novolac system; modified Williams-Landel-Ferry (WLF) equation; glass transition temperature

References
  • 1. Yoon HG, Moon KS, Kim JM, Polym. Abstracts, 22(1), 2L5-1 (1997)
  •  
  • 2. Han S, Kim WG, Yoon HG, Moon TJ, J. Polym. Sci. A: Polym. Chem., 36(5), 773 (1998)
  •  
  • 3. Han S, Kim WG, Yoon HG, Moon TJ, J. Appl. Polym. Sci., 68(7), 1125 (1998)
  •  
  • 4. Han S, Kim WG, Yoon HG, Moon TJ, Bull. Korean Chem. Soc., 18, 11 (1997)
  •  
  • 5. Han S, Kim WG, Suh KS, Yoon HG, Moon TJ, J. Polym. Sci. A: Polym. Chem.in press
  •  
  • 6. Han S, Kim WG, Hwang SD, Yoon HG, Suh KS, Moon TJ, Polym.(Korea), 22(5), 691 (1998)
  •  
  • 7. Halley PJ, Mackay ME, Polym. Eng. Sci., 36(5), 593 (1996)
  •  
  • 8. Hou TH, Huang JYZ, Hinkley JA, J. Appl. Polym. Sci., 41, 819 (1990)
  •  
  • 9. Stockmayer WH, J. Polym. Sci., 6, 96 (1952)
  •  
  • 10. Lipshitz SD, Macosko CW, Polym. Eng. Sci., 16, 803 (1976)
  •  
  • 11. Mijovic J, Lee CH, J. Appl. Polym. Sci., 37, 889 (1989)
  •  
  • 12. Tajima YA, Crozier D, Polym. Eng. Sci., 23, 186 (1983)
  •  
  • 13. Yang YS, Suspene L, Polym. Eng. Sci., 31, 321 (1991)
  •  
  • 14. Williams ML, Landel RF, Ferry JD, J. Am. Chem. Soc., 77, 3701 (1955)
  •  
  • 15. Tung CYM, Dynes PJ, J. Appl. Polym. Sci., 27, 569 (1982)
  •  
  • 16. Winter HH, Polym. Eng. Sci., 27, 1698 (1987)
  •  
  • 17. Kamal MR, Polym. Eng. Sci., 14, 23 (1974)
  •  
  • 18. Horie K, Hiura H, Sawada M, Mita I, Kambe H, J. Polym. Sci. A: Polym. Chem., 8, 1359 (1970)
  •  
  • 19. Gillham JK, Polym. Eng. Sci., 19, 676 (1979)
  •  
  • 20. Matsuoka S, Quan X, Bair HE, Boyle DJ, Macromolecules, 22, 4093 (1989)
  •  
  • 21. Flory PJPrinciples of Polymer Chemistry, Chapter 9, Cornell University Press, Ithaca, N.Y. (1953)
  •  
  • 22. Hale AEpoxy Used in the Encapsulation of Integrated Circuit: Chemistry, Rheology, Glass Transition, and Reactive Processing, Ph.D. Thesis, University of Minnesota (1988)
  •  
  • 23. Simon SL, Gillham JK, J. Appl. Polym. Sci., 46, 1245 (1992)
  •  
  • 24. Venditti RA, Gillham JK, J. Appl. Polym. Sci., 64(1), 3 (1997)
  •  
  • 25. Hale A, Macosko CW, Bair HE, Macromolecules, 24, 2610 (1989)
  •  
  • 26. Miller DR, Macosko CW, Macromolecules, 9, 206 (1976)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1999; 23(1): 105-112

    Published online Jan 25, 1999