Article
  • Osteoblast Behavior on Plasma-Treated Poly(L-Lactic Acid)
  • Kim SS, Kim HW, Kim JM, Sung JH, Pak PK
  • 플라즈마 처리한 Poly(L-Lactic Acid) 표면에서의 골아세포 거동
  • 김승수, 김형우, 김정만, 성진형, 박병기
Abstract
The behavior of osteoblasts, bone-forming cells, on air plasma-treated poly(L-lactic acid) was observed. Osteoblasts were isolated from calvaria of neonatal Sprague Dawley rat by an enzymatic digestive process. A confluent number of osteoblasts (4x104cells/cm2) was suspended with Dulbecco''s modified eagle medium supplemented with 10% fetal bovine serum, and cultured on the polystyrene culture dish coated with PLLA or air plasma-treated PLLA. The attached cells were counted using a hemocytometer to evaluate cell adhesion and growth. Cell morphology was observed using a scanning electron microscope(SEM). Calcium contents deposited on the materials after cell culture were measured using an atomic absorption spectrophotometer(AAS) to evaluate mineralization by osteoblasts. Cells were more spreaded on the plasma-treated PLLA than on the control. Cells were more proliferated on the plasma-treated PLLA than on the control when measured the number of cells after 72 h. In addition, calcium content on the plasma-treated PLLA were higher than that on the control.

본 연구에서는 플라즈마 처리에 의하여 친수화된 폴리락틱 에시드(PLLA) 표면에서의 골조직 형성세포인 골아세포의 거동에 대하여 조사하였다. 골아세포는 Sprague Dawley 쥐의 두개골로부터 효소법을 이용하여 추출하였다. 폴리락틱 에시드 및 플라즈마 처리된 폴리락틱 에시드가 도포되어 있는 세포 배양용 폴리스티렌 플라스크에 골아세포를 4*104 cells/cm2의 농도로 이식하고 항온 항습기에서 배양하였다. 이 때 사용된 세포 배양액은 10% fetal bovine serum(FBS)을 포함하는 Dulbecco''s modified eagle medium(DMEM)이었다. 배양 후 시료 표면에 증식된 세포 수는 hemocytometer를 이용하여 측정하였고, 주사 전자현미경(SEM)으로 세포의 형태 변화를 조사하였다. 원자흡광분석기(AAS)를 이용하여 세포 배양 후 시료표면에 부착된 칼슘의 양을 조사하였다. 플라즈마 처리한 PLLA 표면에서 세포의 퍼짐성이 미처리 PLLA 표면에 비해 컸다. 또한, 세포 배양 72시간의 세포수 변화를 조사한 결과 세포는 미처리 PLLA 표면(2.9±0.2*104cells/cm2)에 비하여 플라즈마 처리한 PLLA 표면(6.6±0.4*104cells/cm2)에서 현저히 증식되었으며, 칼슘 생성량도 증가하였다.

Keywords: poly(L-lactic acid); osteoblast; air plasma-treatment

References
  • 1. Engelberg I, Kohn J, Biomaterials, 12, 292 (1991)
  •  
  • 2. Leong KW, Brott BC, Langer R, J. Biomed. Mater. Res., 19, 941 (1985)
  •  
  • 3. Gilding DK, Reed AM, Polymer, 20, 1459 (1979)
  •  
  • 4. Laurencin CT, El-Amin SF, Ibim SE, Willoughby DA, Attawia M, Allcock HR, Ambrosio AA, J. Biomed. Mater. Res., 30, 133 (1996)
  •  
  • 5. Whang K, Thomas CH, Healy KE, Nuber G, Polymer, 36(4), 837 (1995)
  •  
  • 6. Malik MA, Puleo DA, Bizios R, Doremus RH, Biomaterials, 13, 123 (1992)
  •  
  • 7. Gregoire M, Orly I, Menanteau J, J. Biomed. Mater. Res., 24, 165 (1990)
  •  
  • 8. Athanasiou KA, Niederauer GG, Agawal CM, Biomaterials, 17, 93 (1996)
  •  
  • 9. Kim HW, Kim SS, Kim JM, Polym.(Korea), 22(3), 455 (1998)
  •  
  • 10. Ishaug SL, Yaszemski MJ, Bizios R, Mikos AG, J. Biomed. Mater. Res., 28, 1445 (1994)
  •  
  • 11. Puleo DA, Bizios R, J. Biomed. Mater. Res., 26, 291 (1992)
  •  
  • 12. Puleo DA, Holleran LA, Doremus RH, Bizios R, J. Biomed. Mater. Res., 25, 711 (1991)
  •  
  • 13. Cheung HS, Haak MH, Biomaterials, 10, 63 (1989)
  •  
  • 14. Dee KC, Rueger DC, Andersen TT, Bizios R, Biomaterials, 17, 209 (1996)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1998; 22(6): 1014-1019

    Published online Nov 25, 1998