Article
  • Glass Transition Temperature of Biphenyl-Type Epoxy/Phenol Novolac Resin System
  • Han S, Kim WG, Hwang SD, Yoon HG, Suh KS, Moon TJ
  • Biphenyl계 에폭시/Phenol Novolac 수지 조성물의 유리전이온도
  • 한승, 김환건, 황성덕, 윤호규, 서광석, 문탁진
Abstract
The one-to-one relationship between the glass transition temperature and the extent of reaction oi biphenyl-type epoxy/phenol novolac resin system was interpreted by using DiBenedetto''s equation and DiMarzio''s equation modified by Hale. The relationship between the glass transition temperature and curing time was investigated by diffusion-controlled cure kinetic equation and Hale''s equation. By combining these two equations, it was possible to construct the time-temperature-transformation (TTT) isothermal cure diagram.

Biphenyl계 에폭시/phenol novolac 수지 조성물의 유리전이온도와 전화량과의 일대일 관계를 DiBenedetto 방정식과 Hale에 의하여 보완된 DiMarzio 방정식을 이용하여 해석하였다. 경화시간과 유리전이온도와의 관계는 확산-억제된 경화반응 속도식과 Hale의 방정식으로부터 규명하였으며 이 두 식으로부터 biphenyl계 에폭시/phenol novolac 수지 조성물의 시간-온도-변태 등온 도표를 구할 수 있었다.

Keywords: biphenyl-type epoxy; phenol novolac; glass transition temperature; diffusion; cure kinetics

References
  • 1. Oh KK, Moon KS, Yoon HG, Moon TJ, Ryu JH, Kim JM, Kim JG, Polym.(Korea), 21(5), 812 (1997)
  •  
  • 2. Han S, Kim WG, Yoon HG, Moon TJ, J. Polym. Sci. A: Polym. Chem., 36(5), 773 (1998)
  •  
  • 3. Han S, Kim WG, Yoon HG, Moon TJ, J. Appl. Polym. Sci., 68(7), 1125 (1998)
  •  
  • 4. Han S, Kim WG, Yoon HG, Moon TJ, Bull. Korean Chem. Soc., 18, 11 (1997)
  •  
  • 5. Han S, Kim WG, Suh KS, Yoon HG, Moon TJ, J. Polym. Sci. A: Polym. Chem.accepted
  •  
  • 6. Horie K, Hiura H, Sawada M, Mita I, Kambe H, J. Polym. Sci. A: Polym. Chem., 8, 1357 (1970)
  •  
  • 7. Gillham JK, Polym. Eng. Sci., 19, 676 (1979)
  •  
  • 8. Matsuoka S, Quan X, Bair HE, Boyle DJ, Macromolecules, 22, 4093 (1989)
  •  
  • 9. Fox TG, Loshaek S, J. Polym. Sci., 15, 371 (1955)
  •  
  • 10. Dimarzio EA, J. Res. Ntl. Bur. Stds. Sect. A, 68A, 611 (1964)
  •  
  • 11. Nielsen LE, J. Macromol. Sci.-Rev. Macromol. Chem. Phys., C3(1), 69 (1969)
  •  
  • 12. Hale A, Macosko CW, Bair HE, Macromolecules, 24, 2610 (1989)
  •  
  • 13. Prime RBThermal Characteristic of Polymeric Materials, ed. by E.A. Turi, Chapter 5, Academic Press, Inc., New York (1981)
  •  
  • 14. Simon SL, Gillham JK, J. Appl. Polym. Sci., 46, 1245 (1992)
  •  
  • 15. Venditti RA, Gillham JK, J. Appl. Polym. Sci., 64(1), 3 (1997)
  •  
  • 16. Barral L, Cano J, Lopez AJ, Lopez J, Nogueira P, Ramirez C, J. Appl. Polym. Sci., 61(9), 1553 (1996)
  •  
  • 17. Miller DR, Macosko CW, Macromolecules, 9, 206 (1976)
  •  
  • 18. Hale AEpoxy Used in the Encapsulation of Integrated Circuits: Chemistry, Rheology, Glass Transition, and Reactive Processing, Ph.D. Thesis, University of Minnesota (1988)
  •  
  • 19. Kamal MR, Polym. Eng. Sci., 14, 23 (1974)
  •  
  • 20. Chern CS, Poehlein GW, Polym. Eng. Sci., 27, 782 (1987)
  •  
  • 21. Barral L, Cano J, Lopez AJ, Lopez J, Nogueira P, Ramirez C, J. Appl. Polym. Sci., 56(9), 1029 (1995)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1998; 22(5): 691-698

    Published online Sep 25, 1998