Article
  • Synthesis and Properties of Aromatic Polyamides Having Spiroacetal Moiety
  • Lee JB, Bang MS, Kim KS, Lee KS, Lee SM
  • 스피로아세탈을 포함하는 방향족 폴리아미드의 합성과 물성에 관한 연구
  • 이종배, 방명식, 김기수, 이광섭, 이수민
Abstract
A series of new semi-rigid polyspiroacetals with flexible side groups was prepared by interfacial polycondensation reactions of 4,4'-bis-(p-aminophenoxy)- dibenzalpentaerythritol with 2,5-dialkoxyterephthaloylchlorides having different alkoxy side chains. The resulting polymers showed improved solubilities in common organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidinone, m-cresol, etc. All polymers dissolved in these solvents could be cast into good quality films. The glass transition temperature (Tg) of the polymers decreased with increasing length of alkoxy substituent from 177℃ to 103℃. It was also found that the polymer decomposition starts in the temperature range of 270∼320℃, and their residual weight was in the range 27∼36%, depending upon alkoxy side chain lengths. According to X-ray diffraction studies, all polymers were found to be nearly amorphous due to flexible ether linkage in polymer backbone. The solution-cast film of PSA-Ⅱ-4 having butoxy side groups showed tensile strength of 43 MPa and Young's modulus of 2000 MPa.

중합체 골격에 스피로아세탈을 함유하고 에테르기와 알콕시 곁사슬을 갖는 방향족 폴리아미드를 2,5-dialkoxyterephthaloyl chlorides와 4,4'-bis(p-aminophenoxy)dibenzalpentaerythritol로부터 저온 계면중합시켜 합성하였다. 이 중합체들은 N,N-dimethylacetamide, N-methyl-2-pyrrolidinone, m-cresol 등에 용해되었으며, 유리전이온도는 알콕시 곁사슬 길이가 증가함에 따라 177℃에서 103℃ 까지 감소하는 경향을 보였다. 또한 이들 중합체들은 272∼321℃에서 분해가 시작되었고, 800℃에서의 잔존질량은 27∼36%이었다. 모든 중합체는 결정도가 낮거나 또는 무정형임이 광각 X-선 산란패턴에서 나타났다. 곁사슬이 부톡시기로 치환된 중합체의 기계적 성질을 조사한 결과 인장강도가 43MPa, 인장탄성률이 2000MPa로 나타나 기존의 엔지니어링 플라스틱 수준과 유사함을 알 수 있었다.

Keywords: spiroacetal; flexible side chains; aromatic polyamides; semi-rigid backbone

References
  • 1. Read J, J. Chem. Soc., 101, 2090 (1912)
  •  
  • 2. Orth H, Kunststoffe, 41, 454 (1951)
  •  
  • 3. Kress BHU.S. Patent, 2,785,996 (1957)
  •  
  • 4. Bailey WJ, J. Polym. Sci. Polym. Symp., 64, 17 (1978)
  •  
  • 5. Komminoth P, Poppenwimmer K, Readlj H, Robinson T, Ger. Offen. 2, 151, 724 (1972)
  •  
  • 6. Miyamoto A, Matsukawa H, Ger. Offen. 2, 343, 800 (1974)
  •  
  • 7. Matsukawa H, Skeki K, Ger. Offen. 2, 404, 412 (1974)
  •  
  • 8. Yukuta T, Oohashi T, Yoshii H, Jpn. Kokai. 7, 591, 462 (1975)
  •  
  • 9. Magosch JH, Karl H, Rueter H, Ger. Offen. 2, 448, 954 (1976)
  •  
  • 10. Heller J, Penhale DWH, Panburn SH, Prog. Biomed. Eng., 5, 175 (1988)
  •  
  • 11. Krida K, Hirakaea N, Dobashi T, Iwakura Y, J. Polym. Sci. A: Polym. Chem., 17, 2567 (1979)
  •  
  • 12. Kaito A, Kyptani M, Nakayama K, Macromolecules, 24, 3244 (1991)
  •  
  • 13. Forsini A, Levita G, J. Polym. Sci. B: Polym. Phys., 15, 239 (1977)
  •  
  • 14. Ward W, J. Membr. Sci., 1, 99 (1976)
  •  
  • 15. Jackson WA, Morris JCU.S. Patent, 4,181,792 (1980)
  •  
  • 16. Jin JI, Lee JH, Shim HK, Macromolecules, 22, 93 (1989)
  •  
  • 17. Jin JI, Lee SH, Park HJ, Polym. Bull., 19, 20 (1988)
  •  
  • 18. Rhee JM, Lee KS, Choi KY, Polym.(Korea), 14(5), 448 (1990)
  •  
  • 19. Lee KS, Won JC, Jung JC, Makromol. Chem., 190, 1547 (1989)
  •  
  • 20. Lee KS, Kim HM, Rhee JM, Lee SM, Makromol. Chem., 192, 1033 (1991)
  •  
  • 21. Ballauff M, Makromol. Chem. Rapid Commun., 7, 407 (1986)
  •  
  • 22. Akar A, Talinli N, Makromol. Chem. Rapid Commun., 10, 127 (1989)
  •  
  • 23. Brydson JAPlastics Materials, 5th Ed., Butterworths, London (1989)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1996; 20(4): 701-708

    Published online Jul 25, 1996