Article
  • Synthesis of New Degradable Aliphatic Polyester by Transesterification : Synthesis of Aliphatic Polyester Containing Aromatic Structures
  • Kim DK, Shin YS, Im SS, Yoo YT, Huh JR
  • 에스테르 교환반응을 이용한 새로운 생분해성 지방족 폴리에스테르의 합성 : 방향족 구조를 함유하는 지방족 폴리에스테르의 합성
  • 김동국, 신연수, 임승순, 유영태, 허정림
Abstract
Poly(butylene succinate)[PBS] was synthesized from succinic acid and butanediol. PBS/PET copolymers were prepared by the transesterification of PBS with PET. Inherent viscosity of the copolymers decreased with increasing PET contents, whereas tensile strength decreased a little compared to that of PBS homopolymer. Elongation was greatly improved when the copolymer contained 15 ㏖% PET. PBS/PBT copolymers were also obtained by adding PBT to PBS. Unlike PBS/PET copolymers their inherent viscosity increased until the content of PBT reached up to 15 ㏖% and then gradually decreased with PBT contents. Tensile strength and elongation of the PBS/PBT copolymers containing 5∼20 ㏖% PBT were also improved. Both copolymers synthesized by the transesterification demonstrated enhanced thermal stabilities compared to the PBS homopolymer.

생분해성 지방족 폴리에스테르인 poly(butylene succinate)[PBS]를 succinic acid와 부탄디을에서 합성하였다. PBS와 PET를 혼합하여 에스테르 교환반응으로 PBS/PET 공중합체를 합성하였으며 PET함량이 증가할수록 점도가 감소하였다. PET가 15mo1%일 때 PBS보다 신율이 크게 증가하였으며 인장강도는 PET가 첨가되면 감소하였다. PBS와 PBT의 에스테르 교환반응으로 합성한 PBS/PBT 공중합체는 PBS/PET 공중합체와는 달리 PBT 15mo1%때까지 PBS보다 점도가 증가하였으며 그 이후 첨가량에 따라 점도가 완만히 감소하였다. PBT가 5㏖% 첨가된 경우 인장강도가 54MPa로 크게 증가하였으며 10∼20mo1% 경우도 43∼47MPa로 PBS보다 높은 강도를 나타내었으며 신율도 334∼358%로 향상되었다. PBS에 PET와 PBT의 첨가로 방향족 구조가 도입됨에 따라 열안정성이 향상되었다.

Keywords: PBS; PET; transesterification; PBS/PET copolymer; butanediol; succinic acid

References
  • 1. Vert M, Angew. Makromol. Chem., 167, 55 (1989)
  •  
  • 2. Singhal JS, Singh H, Ray AR, J. Macromol. Sci.-Rev. Macromol. Chem. Phys., C28(384), 475 (1988)
  •  
  • 3. Kumor GS, Kalpagam V, Nandi TS, J. Macromol. Sci.-Rev. Macromol. Chem. Phys., C22(2), 225 (1982)
  •  
  • 4. Huang SJ, Bell JPProceedings of the Third International Symposium, New York (1976)
  •  
  • 5. Bitritto MM, Bell JP, Brenckle GM, Huang SJ, Knox JR, J. Appl. Polym. Sci., 35, 405 (1979)
  •  
  • 6. Kopecek J, Ulbrich K, Prog. Polym. Sci., 9, 1 (1983)
  •  
  • 7. Fields RD, Rodriquez F, Finn RK, J. Appl. Polym. Sci., 18, 3571 (1974)
  •  
  • 8. Huang SJEncyclopedia of Polymer Science and Engineering, vol. 2, pp. 220, John Wiley Interscience, New York (1985)
  •  
  • 9. Huang SJComprehensive Polymer Science, Vol. 6, pp. 567, Pergamon (1989)
  •  
  • 10. Kumar GS, Kalpagram T, Nandi TS, J. Makromol. Sci. Chem., 22, 225 (1982)
  •  
  • 11. Cerrai P, Tricoil M, Andruzzi F, Polymer, 30, 338 (1989)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1996; 20(3): 431-438

    Published online May 25, 1996