Article
  • Thermal Properties of Poly(ethylene 2,6-naphthalate)/Poly(ε-caprolactone) Blends
  • Han K, Kang HJ
  • Poly(ethylene 2,6-naphthalate)/Poly(ε-caprolactone) 블렌드의 열적특성에 관한 연구
  • 한규일, 강호종
Abstract
Thermal properties of biodegradable PEN/PCL blends were investigated. The effects of transesterification between PEN and PCL on the thermal properties and crystallization of PEN/PCL blends were also studied. The blending of PCL without annealing does not cause the change of thermal properties except the cold crystallization temperature and relative crystallinity. Annealing results in the depression of thermal properties due to the transesterification reaction between two polymers which is related the composition ratio of PCL in blends and annealing conditions. Increasing of the level of transesterification results in the decreasing of crystallinity level and it may be related with the kinetics of transesterification.

PEN의 생분해성을 부여하기 위하여 생분해성 합성고분자인 PCL을 블렌딩하여 PEN/PCL블렌드를 제조하고 블렌딩에 의하여 발현하는 용응온도, 유리전이온도 및 cold crystallization 온도의 변화와 결정화정도의 변화를 살펴보았다. 또한 이들 블렌드의 용융가공시 필연적으로 발현하는 상호에스테르 교환반응에 의한 블렌드의 열적특성 및 결정화 변화에 대하여 아울러 고찰하였다. 270℃의 용융블렌딩시 유리전이온도와 용융온도는 변화가 없으나 PCL의 블렌딩에 따른 cold crystallization 온도의 감소 및 상대결정화도가 증가함을 알 수 있었다. PEN/PCL 블렌드 조성비와 가공시 가공기기 내에서의 온도 및 체제시간에 따라 상호 에스테르 교환반응의 정도가 달아지며 이에 따른 용융온도, 유리전이온도 및 cold crystallization 온도의 감소가 발현됨을 알 수 있었다. 상호에스테르 교환반응의 증가는 PEN/PCL의 결정화를 저해하며 이러한 결정화의 변화는 상호에스테르 교환반응의 kinetics와도 연관이 있음을 확인 할 수 있었다.

Keywords: poly(ethylene 2,6-naphthalate); poly(ε-caprolactone); blends; transesterification; thermal properties; relative crystallinity

References
  • 1. Koeske JVPolymer Blend, vol. 2, Chap. 22, Academic Press, New York (1978)
  •  
  • 2. Benedict CV, Cook WJ, Jarrett P, Cameron JA, Juang SJ, Bell JP, J. Appl. Polym. Sci., 28, 327 (1983)
  •  
  • 3. Fields RD, Rodrigues F, Finn RK, J. Appl. Polym. Sci., 18, 3571 (1974)
  •  
  • 4. Gada M, Gross RA, McCarthy SPBiodegradable Plastics and Polymers, p. 177, Y. Doi and K. Fukuda Eds., Elsevier Sci. (1994)
  •  
  • 5. Tokiwa Y, Iwamoto ABiodegradable Plastics and Polymers, p. 190, Y. Doi and K. Fukuda Eds., Elsevier Sci. (1994)
  •  
  • 6. Jun HS, Kim BO, Kim YC, Chang HN, Woo SIBiodegradable Plastics and Polymers, p. 498, Y. Doi and K. Fukuda Eds., Elsevier Sci. (1994)
  •  
  • 7. Pilati F, Marianucci E, Berti C, J. Appl. Polym. Sci., 30, 1267 (1985)
  •  
  • 8. Montaudo G, Montaudo MS, Scamporrino E, Vitalini D, Macromolecules, 25, 5099 (1992)
  •  
  • 9. Pilati F, Comp. Polym. Sci., 5, 275 (1989)
  •  
  • 10. Porter RS, Wang LH, Polymer, 33, 2019 (1992)
  •  
  • 11. Buchner S, Wiswe D, Zachmann HG, Polymer, 30, 480 (1989)
  •  
  • 12. Stewart ME, Cox AJ, Naylor M, Polymer, 34, 4060 (1993)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1996; 20(2): 224-232

    Published online Mar 25, 1996