Article
  • Synthesis and Properties of Poly(chloroprene-co-glycidylmethacrylate)
  • Park CK, Ha CS, Lee JK, Cho WJ
  • 클로로프렌과 글리시딜메타크릴레이트 공중합체의 합성 및 물성
  • 박춘건, 하창식, 이진국, 조원제
Abstract
A copolymer of chloroprene(CP) and glycidylmethacrylate(GMA) (poly(CP-Go-GMA))was prepared by radical solution copolymerization in benzene. The copolymer was characterixed by FT-IR and 1H-NMR spectrophotomrters, and differential scanning calorimetry(DSC).DSC analysis showed that the copolymer was amorphous and had glass transition temperature of about -16.4℃. The monomer reactivity ratios were given as r1(CP) = 3.85 and r2(GMA)=0.19 in the copolymerization of CP and GMA. Thermal suability and the light resistance of the copolymer wereb measured using a thermogravimetric analyzer(TGA) and Fade-o-meter, respectively. It was found that the copolymer showed slightly lower thermal stability than that of polychloroprene(CR), while the copolymer showed fairly better light resistance under the environmental conditions both exposed to U. V. light and heat.

References
  • 1. Graff RSNeoprene and Hypalon, in M. Morton, Rubber Technology 3rd Edn., Van Nostrand, New York, Chap. 12 (1989)
  •  
  • 2. Stewart CA, Takeshita T, Coleman M'2-chloro-butadiene' in H.F. Mark and C.G. Overberger, 'Encyclopedia of Polymer Science and Technology' (edn. M.F. Mark and C.G. Overberger), 2nd Edn. John Wiley & Sons, Vol. 4, p. 522 (1985)
  •  
  • 3. Itoyama K, Dohi M, Ichikawa K, J. Jpn. Soc. Adhes., 20(6), 268 (1984)
  •  
  • 4. Okada T, Otsuru M, J. Appl. Polym. Sci., 23, 2215 (1979)
  •  
  • 5. Erame EG, Khan AA, Rubber Chem. Technol., 50, 272 (1976)
  •  
  • 6. Khan AA, Brame EG, J. Polym. Sci. B: Polym. Phys., 14, 165 (1976)
  •  
  • 7. Okada T, Izuhara M, Hashimoto T, Polym. J., 7(1), 1 (1975)
  •  
  • 8. Gaylord NG, Patnaik BK, J. Polym. Sci. A: Polym. Chem., 13, 837 (1975)
  •  
  • 9. Ebdon JR, Polymer, 15, 782 (1974)
  •  
  • 10. Srinivasan KSV, Radhakrishnan N, Pillai HK, J. Appl. Polym. Sci., 37, 1551 (1989)
  •  
  • 11. Iwakura Y, Kurosaki T, Nakabyashi N, Markromol. Chem., 44, 570 (1961)
  •  
  • 12. Masaki A, Yasui M, Yamashita I, J. Macromol. Sci.-Chem., A6(7), 1285 (1972)
  •  
  • 13. Choi CH, Park CK, Ha CS, Kim BK, Cho WJ, Polym.(Korea), 16(3), 344 (1992)
  •  
  • 14. Park CK, Ha CS, Lee JK, Cho WJ, J. Appl. Polym. Sci.in print (1993)
  •  
  • 15. Park CK, Ha CS, Lee JK, Cho WJ, Polym.(Korea), 16(4), 488 (1992)
  •  
  • 16. Saltzman BPrinciples of Color Technology, 2nd Edn., p. 98, Wiley-Interscience, New York (1981)
  •  
  • 17. Brandrup J, Immergut EHPolymer Handbook, Wiley, 1st ed., II-267 (1966)
  •  
  • 18. Davis A, Sims DWeathering of Polymers, Applied Science, London (1983)
  •  
  • 19. Stiles WS, Burch JM, Opt. Acta, 2, 168 (1955)
  •  
  • 20. Schofield FNat'l Paint. Varnish. Lacqure Assoc. Scient. Soc. Circular, 644 (1943)
  •  
  • 21. Schofield F, Judd DB, Hunter RS, ASTM Bull., 19 (1941)
  •  
  • 22. Hunter RS, J. Opt. Soc. Am., 38(611), 1094 (1948)
  •  
  • 23. Park DJ, Cho WJ, Polym.(Korea), 14(1), 1 (1990)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1993; 17(6): 662-668

    Published online Nov 25, 1993