Article
  • Toughness Improvement of High Performance Epoxy Resin : Ⅱ. Morphology Study of Modified Epoxy Resin
  • Jung HS, Jang J, Shim JS
  • 고성능 에폭시 수지의 간인성 향상 ; Ⅱ. 개질 에폭시 수지의 형태학적 고찰
  • 정호순, 장정식, 심정섭
Abstract
Modified polyetherimide was applied for the improvement of the fracture toughness and mechanical property of EPON HPT 1071 recently developed by Shell Chemical Company. In HPT 1071/DDS/mPEI system, the number and size of dispersed phase within cured epoxy resin were gradually decreased with the increase of the treatment time of polyetherimide. As the content of modified polyetherimide was increased up to 10 wt%, the mechanical property of cured epoxy resin was significantly increased compared with that of the unmodified polyetherimide system. The relationship between the morphology and the mechanical properties of modified epoxy resin was also discussed.

References
  • 1. Bucknall CBToughened Plastics, London, Applied Science (1977)
  •  
  • 2. Kunz SC, Beaunont PW, J. Mater. Sci., 16, 1431 (1981)
  •  
  • 3. McGray FJ, Proc. Soc. London A, 319, 59 (1970)
  •  
  • 4. Yee AF, Pearson RAGeneral Electric Co. NASA Contractor Report, 3718 (1983)
  •  
  • 5. Kuns-Douglass SC, Beaumont PWR, Ashby MF, J. Mater. Sci., 15, 1109 (1980)
  •  
  • 6. Bucknall CB, Yoshi T, Br. Polym. J., 10, 53 (1978)
  •  
  • 7. Manzione LT, Gillham JK, J. Appl. Polym. Sci., 26, 889 (1981)
  •  
  • 8. Manzione LT, Gillham JK, J. Appl. Polym. Sci., 26, 907 (1981)
  •  
  • 9. Kinloch AJ, Shaw SJ, Tod DA, Hunston DL, Polymer, 24, 1341 (1983)
  •  
  • 10. Kinloch AJ, Shaw SJ, Tod DA, Hunston DL, Polymer, 24, 1355 (1983)
  •  
  • 11. Siebert AR, Riew CKPaper Presented at the 161st ACS Meeting, Org. Coat. Plast. Div., Los Angeles, Cal. (1971)
  •  
  • 12. Rowe EH, Siebert AR, Drake RS, Modern. Plast., 47, 110 (1970)
  •  
  • 13. Meeks SC, Polymer, 15, 675 (1984)
  •  
  • 14. Riew CK, Rowe EH, Siebert ARToughness and Brittleness of Plastics, ACS Adv., in Chem. Ser., 154: 326 (1976)
  •  
  • 15. Ting RYEpoxy Resins, C.A. May., Ed., Marcel Dekker, Inc., p. 551-651 (1988)
  •  
  • 16. Riew CK, Rubber Chem. Technol., 54, 374 (1981)
  •  
  • 17. Sultan TN, McGarry FJ, Polym. Eng. Sci., 13, 29 (1973)
  •  
  • 18. Romanchik WA, Sohn JFG, Am. Chem. Soc. Symp. Ser., 221, 85 (1982)
  •  
  • 19. Kinloch AJ, Shaw SJ, Tod DA, Huston DL, Polymer, 24, 1341 (1985)
  •  
  • 20. Okamoto A, Polym. Eng. Sci., 23, 222 (1983)
  •  
  • 21. Yorkgitis EM, Eiss NSEpoxy Resins and Composites I, K. Dusek, Ed., Spinger-Verlag, Berlin, pp. 79-109 (1986)
  •  
  • 22. Yorkgitis EMPh.D. Thesis, Virginia Polytechnic Inst. & State Univ., Blacksburg (1985)
  •  
  • 23. Lee WA Study on New Tetrafunctional Epoxy Resin for Advanced Composite, Ph.D. Dissertation, Seoul National University (1991)
  •  
  • 24. Browning CE, Polym. Eng. Sci., 18, 16 (1978)
  •  
  • 25. McKangue EL, Reynold JD, Haskin JE, J. Appl. Polym. Sci., 22, 1643 (1978)
  •  
  • 26. Apicella A, Nicolais L, Astarita G, Drioli E, Polymer, 20(9), 1143 (1979)
  •  
  • 27. Bauer RS18th International SAMPE Technical Conference, October 7-9, pp. 510-519 (1986)
  •  
  • 28. Chan LC, Gillham JK, Kinloch AJ, Shaw SJRubber-Modified Thermoset Resins, American Chemical Society, p. 261 (1984)
  •  
  • 29. Henry S, Hsich Y34th International SAMPE Symposium May 8-11, 884 (1989)
  •  
  • 30. Younhing H, Huigong W, Xiping Z34th International SAMPE Symposium May 8-11, 875 (1989)
  •  
  • 31. Riley BLV8/GR, MK5 Air frame composite application, in proceedings of the second international conference on fiber reinforced composites, Inst. of Mech. Eng., Publication C33/86, p. 153 (1986)
  •  
  • 32. Poveromo LPolyimides, K.L. Mittel Ed., Plenum Press, New York & London, Vol. 2, p. 1103 (1984)
  •  
  • 33. Rayhava RS28th National SAMPE Conference 28, 367 (1983)
  •  
  • 34. Selton MS, McGrail PT, Peacock JA, Wilknson SP, Crick RA, Davies M, Almen G19th International SAMPE Technical Conference, 19, 700 (1987)
  •  
  • 35. Shimp DA, Hudock FA, Boho WS18th International SAMPE Technical Conference, 18, 851 (1986)
  •  
  • 36. Steiner P, Browne JM, Balin MT, McKillen JM18th International SAMPE Technical Conference, 18, 851 (1986)
  •  
  • 37. Stenzenberger HD, Konig P, Herzog M, Romer W, Pierce S, Canning M32nd International SAMPE Symposium, 32, 44 (1987)
  •  
  • 38. Jung HS, Jang JS, Shim JS, Polym.(Korea), 17(4), 415 (1993)
  •  
  • 39. Okamoto A, Polym. Eng. Sci., 23, 222 (1983)
  •  
  • 40. Yorkgitis EM, Eiss NSEpoxy Resins and Composites I, K. Dusek, Ed., Springer-Verlag, Berlin, pp. 79-109 (1986)
  •  
  • 41. May CAEpoxy Resin Chemistry and Technology, Ed. C.A. May,Marcel Dekker, Inc., New York and Basel, pp. 552 (1988)
  •  
  • 42. Bauer RSThe Proceedings of 34th International SAMPE Symposium, May 7-11, pp. 1385-1393 (1988)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1993; 17(5): 513-520

    Published online Sep 25, 1993