Article
  • Studies on the Optimizing the Properties of Thermoset Polyurethane Resin for In-mold Coating

  • Yong-Cheol Lee and Hakjune Rhee*,†

  • Department of Applied Chemistry, Hanyang University, Ansan, Gyeonggi-do, 15588, Korea
    *Department of Chemical and Molecular Engineering, Hanyang University, Ansan, Gyeonggi-do, 15588, Korea

  • 인몰드 코팅용 열경화성 폴리우레탄 수지의 물성 최적화 연구

  • 이용철 · 이학준*,†

  • 한양대학교 응용화학과, *한양대학교 화학분자공학과

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Kim, D. M. A Study on the Processing Conditions of In-Molding Coating for Injection-Molded Plates.MS Thesis, Korea National University of Transportation, Chung Joo, Korea, 2014.
  •  
  • 2. Lee, H. S.; Kim, D. M. A Study on Mixing Characteristics of Two-component Polyurethane for In-mold Coating, J. Kor. Soc. Precis. Eng. 2013, 30, 317-323.
  •  
  • 3. Park, J. R.; Lee, H. S. An Experimental Study of In-Mold Coating of Automotive Armrests. Kor. Soc. Mech. Eng. Trans. 2015, 39, 687-692.
  •  
  • 4. Lee, J. H.; Lee, S. G.; Choi, K. Y. Reaction Injection Moulding: Chemistry and Recent Developments. Pol. Sci. Tech. 1998, 9, 209-215.
  •  
  • 5. Kim, K. D.; Lee, K. H.; Kim, S. C.; Kim, D. H. The Recent Trend of RIM Process. Polym. Korea 1984, 8, 289-299.
  •  
  • 6. Lee, Y. H.; Moon, J. I.; Kim, H. J.; Lee, J. Y.; Noh, S. M.; Nam, J. H. Effect of Formability of Physical Properties of Polyester/Melamine Cured Coating Using Polycarbonate Diol with Various Molecular Weight. J. Adh. Interf. 2011, 12, 105-110.
  •  
  • 7. Yeo, J. S.; Hwang, S. H. Synthesis of UV-Curable PDMS-Modified Urethane Acrylate Oligomer and Physical Properties of the Cured Film. Elastm. Compos. 2013, 48, 249-255.
  •  
  • 8. Choi, S. H. Polyol for Polyurethane and Foam. Pol. Sci.Tech 1999, 10, 621-628.
  •  
  • 9. Shin, J. S.; Park, J. M.; Lee, Y. H.; Kim, H. D. Preparation and Properties of Eco-friendly Waterborne Polyurethane-urea Primer for Thermoplastic Polypropylene Applied to Automobile Interiors. Clean Technol. 2014, 20, 232-240.
  •  
  • 10. PAVOLA, E. W. Hyperbranched Polyesters for Polyurethane Coatings: Their Preparation, Structure and Crosslinking with Polyisocyanates, Ph.D. Dissertation, Technische Universität Dresden (TU Dresden), Germany, 2006.
  •  
  • 11. Park, C. Y. Cure characteristics, Mechanical Properties and Ozone Resistance of EPDM/SBR Blend Vulcanizates. Elastomer 2008, 43, 104-112.
  •  
  • 12. Jin, K. H.; Cho, U. R. A Study on Structure Analysis and Synthesis of Polyester Polyol & Polyurethane. Elastm. Compos. 2014, 49, 31-36.
  •  
  • 13. Lee, K. W.; Ko, J. H.; Shim, J. Y.; Kim, Y. H. Preparation of Waterborne Polyurethanes Containing Polycarbonate Component and Their Applications to the Impregnation Finishing for Artificial Leathers. Polym. Korea 2009, 33, 175-182.
  •  
  • 14. Son, H. S.; Jeon, D. G.; Park, S. J.; Kim, Y. S.; Kwon, K. T.; Kim, K. S. The Influence of Soft/Hard Segment Composition and Content on the Abrasion Resistance of Polyurethane Coating Agents Trans. KSAE 2014, 22, 5-12.
  •  
  • 15. Seo, S. H.; Suh, C. S.; Park, J. H. The Reactivity of Different Polyols for Paint to Polyisocyanate. J. Kor. Ind. Eng. Chem. 2008, 19, 388-396.
  •  
  • 16. Mailhot, B.; Komvopoulos, K.; Ward, B.; Tian, Y.; Somorjai, G. A. Mechanical and Friction Properties of Thermoplastic Polyurethanes Determined by Scanning Force Microscopy. J. Appl. Phys. 2001, 89, 5712-5719.
  •  
  • 17. Lee, W. J.; Oh, H. G.; Cha, S. H. A Brief Review of Self-Healing Polyurethane Based on Dynamic. Macromol. Res. 2021, 29, 649-664.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2022; 46(4): 484-490

    Published online Jul 25, 2022

  • 10.7317/pk.2022.46.4.484
  • Received on Mar 11, 2022
  • Revised on Apr 9, 2022
  • Accepted on Apr 21, 2022

Correspondence to

  • Hakjune Rhee

  • Department of Chemical and Molecular Engineering, Hanyang University, Ansan, Gyeonggi-do, 15588, Korea

  • E-mail: hrhee@hanyang.ac.kr