Article
  • 3-D Modeling of Epoxy Reaction Molding Process for GIS Spacer

  • Young Gi Hong and Sangmook Lee*,†

  • R&D Center, Dongwoo Electric Corp., 34, Oseongseo-ro, Anjung-eup, Pyeongtaek-si, Gyeonggi-do 17928, Korea
    *Division of Chemical Engineering, Dankook University, 152 Jukjeon-ro, Suji-gu, Yongin-si, Gyeonggi-do 16890, Korea

  • GIS 스페이서에 대한 에폭시 반응 성형 공정의 3-D 모델링

  • 홍영기 ·이상묵*,†

  • 동우전기㈜, *단국대학교 화학공학과

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Pascault, J.-P.; Sautereau, H.; Verdu, J.; Williams, R. J. J. Thermosetting Polymers, 1st ed.; CRC press: New York, 2002.
  •  
  • 2. Dodiuk, H.; Goodman, S. H. Handbook of Thermoset Plastics, 3rd ed.; Elsevier: Amsterdam, 2014.
  •  
  • 3. Fangareggi, A.; Bertucelli, L. Chapter 12 Thermoset Insulation Systems, In Thermosets, 2nd ed., Guo, Q. Ed; Elsevier: New York, 2018; pp 401-408.
  •  
  • 4. Pan, J.; Xu, Y.; Bao, J. Epoxy Composites Foam with Excellent Electromagnetic Interference Shielding and Heat-Resistance Performance. Appl. Polym. 2018, 135, 46013.
  •  
  • 5. Chen, W.; Zhang, D. Improved Prediction of Residual Stress Induced Warpage in Thermoset Composites using a Multiscale Thermo-Viscoelastic Processing Model. Compos. Part A: Appl. Sci. Manuf. 2019, 126, 105575.
  •  
  • 6. De Paolis, L. T.; Agrimi, A.; Zocco, A.; Aloisio, G. A Feasibility Study on the Use of a Remote Supercomputer in a Collaborative Virtual Environment with Force Feedback, Proceedings of the 11th WSEAS Int. Conf. on Computers, Agios Nikolaos, Crete Island, Greece, July 26-28, 2007.
  •  
  • 7. Kong, X.; Zheng, D. A Knowledge-Informed Simplex Search Method Based on Historical Quasi-Gradient Estimations and Its Application on Quality Control of Medium Voltage Insulators. Processes 2021, 9, 770.
  •  
  • 8. Kong, X.; Guo, J.; Zheng, D.; Zhang, J.; Fu, W. Quality Control for Medium Voltage Insulator via a Knowledge-Informed SPSA Based on Historical Gradient Approximations. Processes 2020, 8, 146.
  •  
  • 9. Zhang, Q.; Li, J.; Han, X.; Zhang, X.; He, C.; Yao, X. Partial Discharge Characteristics of Cavities with Different Appearances and Positions in Solid Insulation. IEEE Electr. Insul. Mag. 2019, 35, 34-40.
  •  
  • 10. Macosko, C. W. Fundamentals of Reaction Injection Molding; Hanser Verlag: London, 1989.
  •  
  • 11. Woo, Y. J.; Kim, D. S. Cure and Thermal Decomposition Kinetics of a DGEBA/Amine System Modified with Epoxidized Soybean Oil. J. Therm. Anal. Calorim. 2021, 144, 119-126.
  •  
  • 12. Ran, Z.; Liu, X.; Jiang, X.; Yeping, W.; Liao, H. Study on Curing Kinetics of Epoxy-Amine to Reduce Temperature Caused by the Exothermic Reaction. Thermochim. Acta 2020, 692, 178735.
  •  
  • 13. Abliz, D.; finke, B.; Kwade, A.; Schilde, C.; Ziegmann, G. Cure Kinetics and Rheology, In Acting Principles of Nano-Scaled Matrix Additives for Composite Structures; Sinapius, M.; Ziegman, G. Eds.; Springer: New York, 2021; pp 267-300.
  •  
  • 14. Leistner, C.; Hartmann, S.; Abliz, D.; Ziegmann, G. Modeling and Simulation of the Curing Process of Epoxy Resins using Finite Elements. Contin. Mech. Thermodyn. 2020, 32, 327-350
  •  
  • 15. Tran, N. T.; Gehde, M. Creating Material Data for Thermoset Injection Molding Simulation Process. Polym. Test. 2019, 73, 284-292.
  •  
  • 16. Montserrat, S.; Flaque, C.; Calafell, M.; Andreu, G.; Malek, J, Influence of the Accelerator Concentration on the Curing Reaction of an Epoxy-Anhydride System. Thermochim. Acta 1995, 269, 213-229.
  •  
  • 17. Yong, A. X. H.; Sims, G. D.; Gnaniah, S. J. P.; Ogin, S. L.; Smith, P. A. Heating Rate Effects on Thermal Analysis Measurement of Tg in Composite Materials. Adv. Manuf.; Polym. Compos. Sci. 2017, 3, 43-51.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2021; 45(6): 940-947

    Published online Nov 25, 2021

  • 10.7317/pk.2021.45.6.940
  • Received on Aug 12, 2021
  • Revised on Sep 20, 2021
  • Accepted on Sep 28, 2021

Correspondence to

  • Sangmook Lee

  • *Division of Chemical Engineering, Dankook University, 152 Jukjeon-ro, Suji-gu, Yongin-si, Gyeonggi-do 16890, Korea

  • E-mail: sangmooklee@dankook.ac.kr