Article
  • Effect of Commingled Yarn Type on the Manufacturing of Glass Fiber/Polypropylene Composite Prepreg

  • Jinwon Cho and Jaehyeung Park*,†

  • SHIN HEUNG, Daegu 41756, Korea
    *Department of Bio-Fibers and Materials Science, Kyungpook National University, Daegu 41566, Korea

  • 커밍글 얀 타입에 따른 유리섬유/폴리프로필렌의 복합 프리프레그 제조

  • 조진원 · 박재형*,†

  • 신흥, *경북대학교 바이오섬유소재학과

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Molyneux, M.; Murray, P. P.; Murray, B. Prepreg, Tape and Fabric Technology for Advanced Composites. Composites 1983,14, 87-91.
  •  
  • 2. Lukaszewicz, D. H. J. A.; Ward, C.; Potter, K. D. The Engineering Aspects of Automated Prepreg Layup: History, Present and Future. Composites Part B 2012,43, 997-1009.
  •  
  • 3. Bernhardsson, J.; Shishoo, R. Effect of Processing Parameters on Consolidation Quality of Gf/PP Commingled Yarn Based Composites. J. Thermoplast. Compos. Mater. 2000,13, 292-313.
  •  
  • 4. Selver, E.; Potluri, P.; Hogg, P.; Soutis, C. Impact Damage Tolerance of Thermoset Composites Reinforced with Hybrid Commingled Yarns. Composites Part B 2016,91, 522-538.
  •  
  • 5. Akovali, G. Handbook of Composite Fabrication; Rapra Technology: Shrewsbury, 2001.
  •  
  • 6. Svensson, N.; Shishoo, R.; Gilchrist, M. Manufacturing of Thermoplastic Composites from Commingled Yarns-A Review. J. Thermoplast. Compos. Mater. 1998,11, 22-56.
  •  
  • 7. Alagirusamy, R.; Ogale, V. Development and Characterization of GF/PET, GF/Nylon, and GF/PP Commingled Yarns for Thermoplastic Composites. J. Thermoplast. Compos. Mater. 2005,18, 269-285.
  •  
  • 8. Liu, D.; Ding, J.; Fan, X.; Lin, X.; Zhu, Y. Non-isothermal Forming of Glass Fiber/Polypropylene Commingled Yarn Fabric Composites. Mater. Design 2014,57, 608-615.
  •  
  • 9. Baghaei, B.; Skrifvars, M.; Berglin, L. Characterization of Thermoplastic Natural Fibre Composites Made from Woven Hybrid Yarn Prepregs with Different Weave Pattern. Composites Part A 2015,76, 154-161.
  •  
  • 10. Baghaei, B.; Skrifvars, M.; Berglin, L. Manufacture and Characterisation of Thermoplastic Composites Made from PLA/Hemp Co-wrapped Hybrid Yarn Prepregs. Composites Part A 2013,50, 93-101.
  •  
  • 11. Wiegand, N.; Mäder, E. Commingled Yarn Spinning for Thermoplastic/Glass Fiber Composites. Fibers 2017,5, 26.
  •  
  • 12. Bernet, N.; Michaud, V.; Bourban, P. E.; Manson, J. A. E. An Impregnation Model for the Consolidation of Thermoplastic Composites Made from Commingled Yarns. J. Compos. Mater. 1999,33, 751-772.
  •  
  • 13. Thanomsilp, C.; Hogg, P. J. Interlaminar Fracture Toughness of Hybrid Composites Based on Commingled Yarn Fabrics. Compos. Sci. Technol. 2005,65, 1547-1563.
  •  
  • 14. Mäder, E.; Rausch, J.; Schmidt, N. Commingled Yarns – Processing Aspects and Tailored Surfaces of Polypropylene/Glass Composites. Composites Part A 2008,39, 612-623.
  •  
  • 15. Bernet, N.; Michaud, V.; Bourban, P. E.; Månson, J. A. E. Commingled Yarn Composites for Rapid Processing of Complex Shapes. Composites Part A 2001,32, 1613-1626.
  •  
  • 16. Alagirusamy, R.; Ogale, V. Commingled and Air Jet-textured Hybrid Yarns for Thermoplastic Composites. J. Ind. Text. 2004, 33, 223-243.
  •  
  • 17. Mudhukrishnan, M.; Hariharan, P.; Malhotra, S. K. Characterization of Glass Fibre/Carbon Fibre Hybrid Thermoplastics Composite Laminates Fabricated by Film Stacking Method. Appl. Mech. Mater. 2015,787, 518-522.
  •  
  • 18. Hamada, H.; Fujihara, K.; Harada, A. The Influence of Sizing Conditions on Bending Properties of Continuous Glass Fiber Reinforced Polypropylene Composites. Composites Part A 2000,31, 979-990.
  •  
  • 19. Dai, S.; Cunningham, P. R.; Marshall, S.; Silva, C. Influence of Fibre Architecture on the Tensile, Compressive and Flexural Behaviour of 3D Woven Composites. Composites Part A 2015,69, 195-207.
  •  
  • 20. Wright, T.; Bechtold, T.; Bernhard, A.; Manian, A. P.; Scheiderbauer, M. Tailored Fibre Placement of Carbon Fibre Rovings for Reinforced Polypropylene Composite Part 1: PP Infusion of Carbon Reinforcement. Composites Part B 2019, 162, 703-711.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2021; 45(3): 414-420

    Published online May 25, 2021

  • 10.7317/pk.2021.45.3.414
  • Received on Dec 9, 2020
  • Revised on Jan 6, 2021
  • Accepted on Jan 6, 2021

Correspondence to

  • Jaehyeung Park*

  • *Department of Bio-Fibers and Materials Science, Kyungpook National University, Daegu 41566, Korea

  • E-mail: parkj@knu.ac.kr