Article

Variations in the Impact Strength of Material Extrusion-type 3D Printed Specimens Depending on Tool Path and Building Direction
In Young Woo and Min-Young Lyu^†
Department of Mechanical Design and Manufacturing Engineering, Graduate School of Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea
재료 압출 방식 3D 프린팅 시편에서 적층 경로와 적층 방향에 따른 충격강도의 변화
우인영 · 류민영^†
서울과학기술대학교 대학원 기계디자인금형공학과

References

1. M.-Y. Lyu and H.-Y. Kim, Poly. Sci. Technol., 20, 157 (2009).
2. S. H. Paek, KIC News, 18, 1 (2015).
3. S.Kumar and J.-P Kruth, Mater. Des., 31, 850 (2010).
4. L. Wang and D. J. Gardner, Polymer, 113, 74 (2017).
5. L. Wang, W. M. Gramlich, and D. J. Gardner, Polymer, 114, 242 (2017).
6. T. D. McLouth, J. V. Severino, P. M. Adams, D. N. Patel, and R. J. Zaldivar, Addit. Manuf., 18, 103 (2017).
7. J. S. Kim, N. Jo, J. S. Nam, and S. W. Lee, Trans. Korea Soc. Mech. Eng., 41, 607 (2017).
8. R. J. Jaldivar, D. B. Witkin, T. McLouth, D. N. Patel, K. Schmitt, and J. P. Nokes, Addit. Manuf., 13, 71 (2017).
9. B. Huang and S. Singamneni, J. Compos. Mater., 49, 363 (2015).
10. S. J. Park, J. H. Park, M.-Y. Lyu, M. S. Koo, H. J. Rho, and S. H. Cho, Polym. Korea, 41, 531 (2017).
11. H. S. Yoon, M.-Y. Lyu, and S. C. Jin, Polym. Korea, 42, 752 (2018).
12. S. J. Park, J. H. Park, K. H. Lee, and M.-Y. Lyu, Polym. Korea, 40, 846 (2016).
13. O. S. Es-Said, J. Foyos, R. Noorani, M. Mendelson, R. Marloth, and B. A.Pregger, Mater. Manuf. Process., 15, 107 (2000)

Polymer(Korea) 폴리머
Frequency : Bimonthly(odd)
ISSN 0379-153X(Print)
ISSN 2234-8077(Online)
Abbr. Polym. Korea
2023 Impact Factor : 0.4
Indexed in SCIE

Min-Young Lyu
Department of Mechanical Design and Manufacturing Engineering, Graduate School of Seoul National University of Science and Technology, 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea
E-mail: mylyu@seoultech.ac.kr,