Article
  • Physical Properties of a DGEBA Epoxy Resin System Modified with Epoxidized Soybean Oil

  • Ye Jun Woo and Dae Su Kim†

  • Department of Chemical Engineering, Chungbuk National University, 1 Chungdaero, Seowongu, Cheongju, Chungbuk 28644, Korea

  • 에폭시화 콩기름 개질 DGEBA 에폭시 수지계의 물성

  • 우예준 · 김대수†

  • 충북대학교 공과대학 화학공학과

References
  • 1. N. Rabearison, C. Jochum, and J. C. Grandidier, J. Mater. Sci., 46, 787 (2011).
  •  
  • 2. S. M. Park and D. S. Kim, Compos. Interfaces, 23, 675 (2016).
  •  
  • 3. H. Ren, S. Tang, J. A. Syed, and X. Meng, High. Perform. Polym., 24, 580 (2012).
  •  
  • 4. D. S. Kim and S. C. Kim, Polym. Eng. Sci., 34, 625 (1994).
  •  
  • 5. G. M. Roudsari, A. K. Mohanty, and M. Misra, J. Appl. Polym. Sci., 134, 611 (2017).
  •  
  • 6. R. Liu, X. Zhang, S. Gao, X. Liu, X. Z. Wang, and J. Yan, RSC Adv., 6, 52549 (2016).
  •  
  • 7. J. K. Kocsis, S. Grishchuk, L. Sorochynska, and M. Z. Rong, Polym. Eng. Sci., 54, 747 (2014).
  •  
  • 8. A. Adhvaryu and S. Z. Erhan, Ind. Crop. Prod., 15, 247 (2002).
  •  
  • 9. F. S. Güner, T. Yağcı, and A. T. Erciyes, Prog. Polym. Sci., 31, 633 (2006).
  •  
  • 10. P. Niedermann, G. Szebényi, and A. Toldy, J. Polym. Environ., 22, 525 (2014).
  •  
  • 11. S. Kumar, S. K. Samal, S. Mohanty, and S. K. Nayak, Ind. Eng. Chem. Res., 56, 687 (2017).
  •  
  • 12. A. P. Gupta, S. Ahmad, and A. Dev, Polym. Eng. Sci., 51, 1087 (2011).
  •  
  • 13. S. J. Park, F. L. Jin, and J. R. Lee, Mater. Sci. Eng. A, 374, 109 (2004).
  •  
  • 14. C. Chihani, M. Mouzali, and M. J. M. Abadie, J. Appl. Polym. Sci., 69, 1167 (1998).
  •  
  • 15. M. A. Torabizadeh, Indian J. Eng. Mater. Sci., 20, 299 (2013).
  •  
  • 16. X. Zhang, X. Yan, J. Guo, Z. Liu, D. Jiang, Q. He, and S. Wei, J. Mater. Chem., 3, 162 (2015).
  •  
  • 17. S. K. Sahoo, S. Mohanty, and S. K. Nayak, RSC Adv., 5, 13674 (2015).
  •  
  • 18. F. I. Altuna, L. H. Espósito, R. A. Ruseckaite, and P. M. Stefani, J. Appl. Polym. Sci., 120, 789 (2011).
  •  
  • 19. A. E. Gerbase, J. R. Gregóorio, M. Martinelli, M. C. Brasil, and A. N. Mendes, J. Am. Oil Chem. Soc., 79, 179 (2002).
  •  
  • 20. W. H. Han and S. M. Lee, Polym. Korea, 42, 485 (2018).
  •  
  • 21. J. Zhu, K. Chandrashekhara, V. Flanigan, and S. Kapila, J. Appl. Polym. Sci., 91, 3513 (2004).
  •  
  • 22. T. Saurabh, M. Patnaik, S. L. Bhagt, and V. C. Renge, Int. J. Adv. Eng. Technol., 2, 491 (2011).
  •  
  • 23. Y. Chen, L. Yang, J. Wu, L. Ma, D. E. Finlow, S. Lin, and K. Song, J. Therm. Anal. Calorim., 113, 939 (2013).
  •  
  • 24. F. L. Jin and S. J. Park, Polym. Int., 57, 577 (2008).
  •  
  • 25. S. W. Benson, J. Chem. Educ., 42, 502 (1965).
  •  
  • 26. J. A. Kerr, Chem. Rev., 66, 465 (1966).
  •  
  • 27. S. M. Lee, Polym. Korea, 42, 498 (2018).
  •  
  • 28. T. Agag and T. Takeichi, Polymer, 40, 6557 (1999).
  •  
  • 29. S. Ma, W. Liu, Y. Zhao, Z. Yan, and N. Gao, J. Macromol. Sci. Part A, 49, 81 (2012).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2019; 43(3): 359-364

    Published online May 25, 2019

  • 10.7317/pk.2019.43.3.359
  • Received on Dec 28, 2018
  • Revised on Feb 26, 2019
  • Accepted on Mar 12, 2019

Correspondence to

  • Dae Su Kim

  • Department of Chemical Engineering, Chungbuk National University, 1 Chungdaero, Seowongu, Cheongju, Chungbuk 28644, Korea

  • E-mail: dskim@chungbuk.ac.kr