Article
  • Cure Kinetics of Cycloaliphatic/DGEBA Epoxy Blend System Initiated by Thermal Latent Catalyst
  • Kwak GH, Park SJ, Lee JR
  • 잠재성 양이온 개시제를 이용한 Cycloaliphatic/DGEBA 에폭시 블렌드계의 경화 동력학에 관한 연구
  • 곽근호, 박수진, 이재락
References
  • 1. Bauer RSEpoxy Resin Chemistry, Advances in Chemistry Series, No. 114, American Chemical Society, Washington, DC, 1979 (1979)
  •  
  • 2. Lee H, Nevile KHandbook of Epoxy Resins, McGraw-Hill, , New York, 1967 (1967)
  •  
  • 3. Rosato SV, Dimattia DP, Rosato DVDesigning with Plastics and Composites, Nostrand Reinhold, New York, 1991 (1991)
  •  
  • 4. Crivello JV, Lam JHW, J. Polym. Sci. A: Polym. Chem., 18, 1021 (1980)
  •  
  • 5. Gu J, Narang SC, Pearce EL, J. Appl. Polym. Sci., 30, 2997 (1985)
  •  
  • 6. Clayton AMEpoxy Resin Chemistry & Technology, 2nd ed., Marcel Dekker, Inc., New York and Basel, 1988 (1988)
  •  
  • 7. Mertzel E, Koenig JL, Adv. Polym. Sci., 72, 75 (1985)
  •  
  • 8. Mones ET, Walkup CM, Happe JA, Morgan RJ, Proc. Natl. SAMPE Tech. Conf., 14, 89 (1982)
  •  
  • 9. Garroway AN, Ritchey WM, Moniz WB, Macromolecules, 15, 1051 (1982)
  •  
  • 10. Kim YC, Park SJ, Lee JR, Polym. J., 29, 759 (1997)
  •  
  • 11. Lee SMInternational Encyclopedia of Composites, vol. 2, VCH Publishers, Inc., New York, 1990 (1990)
  •  
  • 12. Winter HH, Polym. Eng. Sci., 27, 1698 (1987)
  •  
  • 13. Uno H, Takata T, Endo T, J. Polym. Sci. A: Polym. Chem., 27, 1675 (1989)
  •  
  • 14. Mark HF, Blkales NM, Overberger CG, Menges GEncyclopedia of Polymer Science and Engineering, 2nd Ed., p. 8, John Wiley & Sons, New York, 1986 (1986)
  •  
  • 15. Kwon H, Kim YC, Park SJ, Lee JR, Polym.(Korea), 22(2), 285 (1998)
  •  
  • 16. Odian JPrinciples of Polymerization, 2rd ed., John Wiley & Sons, New York, 1991 (1991)
  •  
  • 17. Abu-Abdoun II, Ali A, Eur. Polym. J., 28, 73 (1988)
  •  
  • 18. Matejka L, Chabanne P, Tighzert L, Pascault JP, J. Polym. Sci. A: Polym. Chem., 32(8), 1447 (1994)
  •  
  • 19. Waters DN, John LP, Anal. Chem., 60, 53 (1988)
  •  
  • 20. Salla JM, Ramis X, Polym. Eng. Sci., 36(6), 835 (1996)
  •  
  • 21. Liu YL, Hsiue GH, Chiu YS, Jeng RJ, J. Appl. Polym. Sci., 61(10), 1789 (1996)
  •  
  • 22. Opalicki M, Kenny JM, Nicolais L, J. Appl. Polym. Sci., 61(6), 1025 (1996)
  •  
  • 23. Lee SN, Chiu MT, Lin HS, Polym. Eng. Sci., 32, 1037 (1992)
  •  
  • 24. Sourour S, Kamal MR, Thermochim. Acta, 14, 41 (1976)
  •  
  • 25. Kamal MR, Sourour S, Ryan M, Soc. Plast. Eng. Tech. Paper, 19, 187 (1973)
  •  
  • 26. Eloundou JP, Feve M, Harran D, Pascault JP, Angew. Makromol. Chem., 230, 13 (1995)
  •  
  • 27. Wang X, Gillham JK, J. Appl. Polym. Sci., 43, 2267 (1991)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1999; 23(1): 42-55

    Published online Nov 30, -0001

  • 10.7317/pk.
  • Received on Nov 30, -0001
  • Revised on Nov 30, -0001
  • Accepted on Nov 30, -0001

Correspondence to

  • E-mail: