Article
  • Investigation on Anisotropy according to Printing Conditions for Projection Type Photo-polymerization 3D Printing

  • Nam-Hoon Chang, Sung-Eun Song*, and Keun Park†

  • Dept. of Mechanical System Design Engineering, Seoul Nat’l Univ. of Science and Technology, Seoul 01811, Korea
    *Development Team, CARIMA Co. Ltd., Seoul 07542, Korea, and School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Korea

  • 전사방식 광조형 3차원 프린팅의 조형조건에 따른 이방성 고찰

  • 장남훈 · 송성은* · 박 근†

  • 서울과학기술대학교 기계시스템디자인공학과, *㈜캐리마 개발팀 및 성균관대학교 화학공학부

References
  • 1. H. Lipson and M. Kurman, Fabricated: The new world of 3D printing, John Wiley & Sons, 2013.
  •  
  • 2. J. Kotlinski, Rapid Prototyping J., 20, 499 (2014).
  •  
  • 3. B. N. Turner and S. A. Gold, Rapid Prototyping J., 21, 25 (2015).
  •  
  • 4. P. F. Jacobs, Rapid prototyping & manufacturing: fundamentals of stereolithography, Society of Manufacturing Engineers, Dearborn, 1992.
  •  
  • 5. C. Sun, N. Fang, D. M. Wu, and X. Zhang, Sens. Actuators A: Phys., 121, 113 (2005).
  •  
  • 6. D. H. Shin, Y. M. Park, and S. H. Park, J. Kor. Soc. Manuf. Proc. Engrs., 17, 47 (2018).
  •  
  • 7. S. H. Ahn, M. Montero, D. Odell, S. Roundy, and P. K. Wright, Rapid Prototyping J., 8, 248 (2002).
  •  
  • 8. S. J. Park, J. H. Park, K. H. Lee, and M. Y. Liu, Polym. Korea, 40, 846 (2016).
  •  
  • 9. S. J. Park, J. H. Park, M. Y. Liu, M. S. Koo, H. J. Rho, and S. H. Cho, Polym. Korea, 41, 531 (2017).
  •  
  • 10. R. Hague, S. Mansour, N. Saleh, and R. Harris, J. Mater. Sci., 39, 2457 (2004).
  •  
  • 11. R. Quintana, J. W. Choi, K. Puebla, and R. Wicker, Int. J. Adv. Manuf. Technol., 46, 201 (2010).
  •  
  • 12. K. Puebla, K. Arcaute, R. Quintana, and R. B. Wicker, Rapid Prototyping J., 18, 374 (2012).
  •  
  • 13. Y. E. Lim, J. H. Park, and K. Park, Int. J. Prec. Eng. Manuf. Green Technol., 5, 499 (2018).
  •  
  • 14. M. Monzon, Z. Ortega, A. Hernandez, R. Paz, and F. Ortega, Materials, 10, 64 (2017).
  •  
  • 15. H. W. Kang, J. H. Park, and D. W. Cho, Sens. Actuators A: Phys., 178, 223 (2012).
  •  
  • 16. H. C. Kim, D. Y. Kim, J. E. Lee, and K. Park, Adv. Mater. Lett., 8, 1199 (2017).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2018; 42(6): 1040-1045

    Published online Nov 25, 2018

  • 10.7317/pk.2018.42.6.1040
  • Received on Jul 3, 2018
  • Revised on Aug 19, 2018
  • Accepted on Aug 20, 2018

Correspondence to

  • Keun Park

  • Dept. of Mechanical System Design Engineering, Seoul Nat’l Univ. of Science and Technology, Seoul 01811, Korea

  • E-mail: kpark@seoultech.ac.kr