Article
  • Effect of Resin Viscosity and Lubricants on Surface and Mechanical Properties of Glass Fiber Reinforced Polymer in Rapid Heat Cycle Molding

  • Aimin Zhang† , Yang Hui, and Junji Hou

  • Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, Shandong 250061, PR China

  • 금속 열순환 성형에서 수지의 점도와 윤활유가 유리 섬유 강화 고분자의 기계적 물성과 표면에 미치는 영향
References
  • 1. N. J. Nam, S. H. Park, K.H. Lee, and J. K. Kim, Polym. Korea, 27, 299 (2003).
  •  
  • 2. D. M. Moon, T. G. Choi, and P. Lyu, Polym. Korea, 38, 708 (2014).
  •  
  • 3. G. Wang, Y. Hui, L. Zhang, and G. Zhao, Int. J. Heat Mass Transfer, 116, 1192 (2018).
  •  
  • 4. B. Kim, W. Jang, J. Kim, C. W. Chung, Y. H. Park, and S. Choe, Polym. Korea, 25, 855 (2001).
  •  
  • 5. K. M. B Jansen and A. A. M Flaman, Polym. Eng. Sci., 34, 894 (1994).
  •  
  • 6. K. M. B Jansen and A. A. M Flaman, Polym. Eng. Sci., 34, 898 (1994).
  •  
  • 7. M. Chen, D. G. Yao, and B. Kim, Polym. Plast. Technol. Eng., 40, 491 (2001).
  •  
  • 8. D. G. Yao and B. Kim. J. Injection Molding Technol., 6, 11 (2002).
  •  
  • 9. S. C. Chen, Y. W. Lin, R. D. Chien, and H. M. Li, Adv. Polym. Tech., 27, 224 (2008).
  •  
  • 10. S. C. Chen, W. R. Jong, Y. J. Chang, J. A. Chang, and J. C. Cin, J. Micromech. Microeng., 16, 1783 (2006).
  •  
  • 11. S. C. Chen, W. R. Jong, and J. A. Chang. J. Appl. Polym. Sci., 101, 1174 (2006).
  •  
  • 12. M. C. Yu, W. B. Young, and P. M. Hsu, Mater. Sci. Eng., A, 460, 288 (2007).
  •  
  • 13. G. Wang, G. Zhao, and H. Li, Mater. Des., 31, 3426 (2010).
  •  
  • 14. G. Wang, G. Zhao, H. Li, and Y. Guan, Polym. Plast. Technol. Eng., 48, 671 (2009).
  •  
  • 15. G. Zhao, G. Wang, Y. Guan, and H. Li, Polym. Adv. Technol., 22, 476 (2011).
  •  
  • 16. S. C. Chen, Y. C. Wang, S. C. Liu, and J. C. Cin, Sens. Actuators, A, 151, 87 (2009).
  •  
  • 17. L. Xie and G. Ziegmann, Microsyst. Technol., 15, 1427 (2009).
  •  
  • 18. X. Wang, G. Zhao, and G. Wang, Mater. Des., 47, 779 (2013).
  •  
  • 19. D. Liu, C. Shen, C. Liu, Y. Xin, and L. Sun, Adv. Mater. Res., 189-193, 2477 (2011).
  •  
  • 20. G. Wang, G. Zhao, and Y. Guan, J. Appl. Polym. Sci., 128, 1339 (2013).
  •  
  • 21. X. Li, N. Gong, and G. Chang, Appl. Mech. Mater., 275-277, 2210 (2013).
  •  
  • 22. A. Zhang, G. Zhao, and Y. Guan, J. Appl. Polym. Sci., 132, 1 (2015).
  •  
  • 23. W. Wang, G. Zhao, Y. Guan, X. Wu, and Y. Hui, J. Polym. Res., 22, 84 (2015).
  •  
  • 24. J. Vera, A. C. Brulez, E. Contraires, M. Larochette, N. Trannoy-Orban, M. Pignon, C. Mauclair, S. Valette, and S. Benayoun, J. Micromech. Microeng., 28, 015004 (2018).
  •  
  • 25. S. Meister, A. Seefried, and D. Drummer, Microsyst. Technol. Micro Nanosyst. Inf. Storage Process. Syst., 22, 687 (2016).
  •  
  • 26. ASTM D 638 Standard test method for tensile properties of plastics.
  •  
  • 27. ASTM D790 Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials.
  •  
  • 28. ASTM D 256 Standard test methods for determining the Izod pendulum impact resistance of plastics.
  •  
  • 29. V. Speranza, S. Liparoti, M. Calaon, G. Tosello, R. Pantani, and G. Titomanlio, Mater. Des., 133, 559 (2017).
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2018; 42(6): 974-981

    Published online Nov 25, 2018

  • 10.7317/pk.2018.42.6.974
  • Received on May 2, 2018
  • Revised on Jun 7, 2018
  • Accepted on Jun 11, 2018

Correspondence to

  • Aimin Zhang

  • Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), School of Materials Science and Engineering, Shandong University, Jinan, Shandong 250061, PR China

  • E-mail: zhangam@sdu.edu.cn