Article
  • Effect of Ionomer on Polystyrene/Polyethylene Blends
  • Kim KU, Park TS
  • 폴리스티렌/폴리에틸렌 블렌드에서 이오노머의 영향
  • 김광웅, 박태석
Abstract
In PS/HDPE and PS/LDPE blends, effect of an ionomer (Zn salt of E/MAA, Surlyn) is studied in terms of rheological antral mechanical properties. With 5 wt.% ionomer concentration, viscosity of PS/PE blends is increased slightly, but with no significant change in rheological properties or processability. Also, inclusion of 5% ionomer does not affect tensile strength and elongation of the blend significantly. However, the properly designed ionomer can be a good compatibilizer by utilizing usual compatibilizing action as well as ionic characteristic. The design of ionomer shall include compatibility with constituent of the blend and size of blocks.

PS/HDPE와 PS/LDPE 블렌드에서 상업적으로 생산되고 있는 아연염 E/MAA (ethylene/methacrylic acid) 이오노머 (Surlyn)의 영향을 유성학적 성질과 기계적 성질로써 조사하였다. 이오노머 농도가 무게로 5%인 PS/HDPE 및 PS/LDPE 블렌드의 점도는 약간 상승하나, 유성학적 성질이나 가공성을 크게 변화시킬 정도는 아니다. 인장강도와 연신률로 측정된 기계적 성질에 5% 이오노머의 농도는 큰 영향을 주지 않고 있다. 그러나 블렌드의 구성성분과의 상용성 및 분자량을 감안하여 적절하게 설계된 이오노머는 통상의 상용화작용 외에 이온결합력을 이용할 수 있으므로 좋은 상용화제의 가능성을 지니고 있다.

Keywords:

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1989; 13(5): 421-425

    Published online Jun 25, 1989

  • 10.7317/pk.
  • Received on Nov 30, -0001
  • Revised on Nov 30, -0001
  • Accepted on Nov 30, -0001

Correspondence to

  • E-mail: